From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/15] fdt: added the ability to set initrd start/end via chosen command
Date: Fri, 15 Aug 2008 08:24:34 -0500 [thread overview]
Message-ID: <1218806685-3615-4-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1218806685-3615-3-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
common/cmd_fdt.c | 21 +++++++++++++++++----
1 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index d3b19dd..436fec9 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -417,9 +417,21 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
ft_board_setup(working_fdt, gd->bd);
#endif
/* Create a chosen node */
- else if (argv[1][0] == 'c')
- fdt_chosen(working_fdt, 0, 0, 1);
- else {
+ else if (argv[1][0] == 'c') {
+ unsigned long initrd_start = 0, initrd_end = 0;
+
+ if ((argc != 2) && (argc != 4)) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (argc == 4) {
+ initrd_start = simple_strtoul(argv[2], NULL, 16);
+ initrd_end = simple_strtoul(argv[3], NULL, 16);
+ }
+
+ fdt_chosen(working_fdt, initrd_start, initrd_end, 1);
+ } else {
/* Unrecognized command */
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
@@ -798,7 +810,8 @@ U_BOOT_CMD(
"fdt rsvmem print - Show current mem reserves\n"
"fdt rsvmem add <addr> <size> - Add a mem reserve\n"
"fdt rsvmem delete <index> - Delete a mem reserves\n"
- "fdt chosen - Add/update the /chosen branch in the tree\n"
+ "fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n"
+ " <start>/<end> - initrd start/end addr\n"
"NOTE: If the path or property you are setting/printing has a '#' character\n"
" or spaces, you MUST escape it with a \\ character or quote it with \".\n"
);
--
1.5.5.1
next prev parent reply other threads:[~2008-08-15 13:24 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-15 13:24 [U-Boot] [PATCH 01/15] Update linux bootm to support ePAPR client interface Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 02/15] Clean up usage of icache_disable/dcache_disable Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 03/15] Add command to enable/disable interrupts Kumar Gala
2008-08-15 13:24 ` Kumar Gala [this message]
2008-08-15 13:24 ` [U-Boot] [PATCH 05/15] fdt: fdt addr w/o any args reports back the current working address Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 06/15] bootm: refactor entry point code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 07/15] bootm: refactor ramdisk locating code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 08/15] bootm: refactor fdt locating and relocation code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 09/15] bootm: Set working fdt address as part of the bootm flow Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 10/15] bootm: move lmb into the bootm_headers_t structure Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 11/15] bootm: refactor image detection and os load steps Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 12/15] fdt: refactor fdt resize code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 13/15] fdt: refactor initrd related code Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 14/15] fdt: Added resize command Kumar Gala
2008-08-15 13:24 ` [U-Boot] [PATCH 15/15] bootm: refactor do_reset and os boot function args Kumar Gala
2008-08-26 21:48 ` Wolfgang Denk
2008-08-26 21:46 ` [U-Boot] [PATCH 14/15] fdt: Added resize command Wolfgang Denk
2008-08-26 21:45 ` [U-Boot] [PATCH 13/15] fdt: refactor initrd related code Wolfgang Denk
2008-08-26 21:45 ` Wolfgang Denk
2008-08-26 21:43 ` [U-Boot] [PATCH 12/15] fdt: refactor fdt resize code Wolfgang Denk
2008-08-26 21:42 ` [U-Boot] [PATCH 11/15] bootm: refactor image detection and os load steps Wolfgang Denk
2008-08-26 21:38 ` [U-Boot] [PATCH 10/15] bootm: move lmb into the bootm_headers_t structure Wolfgang Denk
2008-08-26 21:37 ` [U-Boot] [PATCH 09/15] bootm: Set working fdt address as part of the bootm flow Wolfgang Denk
2008-08-26 21:37 ` [U-Boot] [PATCH 08/15] bootm: refactor fdt locating and relocation code Wolfgang Denk
2008-08-26 21:35 ` [U-Boot] [PATCH 07/15] bootm: refactor ramdisk locating code Wolfgang Denk
2008-08-21 12:02 ` [U-Boot] [PATCH 06/15] bootm: refactor entry point code Kumar Gala
2008-08-26 21:34 ` Wolfgang Denk
2008-08-26 21:47 ` Jerry Van Baren
2008-08-26 21:57 ` Wolfgang Denk
2008-08-27 0:07 ` Kumar Gala
2008-08-26 21:31 ` Wolfgang Denk
2008-08-18 23:07 ` [U-Boot] [PATCH 05/15] fdt: fdt addr w/o any args reports back the current working address Wolfgang Denk
2008-08-18 23:23 ` Jerry Van Baren
2008-08-20 22:56 ` Wolfgang Denk
2008-08-18 23:04 ` [U-Boot] [PATCH 04/15] fdt: added the ability to set initrd start/end via chosen command Wolfgang Denk
2008-08-20 22:56 ` Wolfgang Denk
2008-08-18 22:59 ` [U-Boot] [PATCH 03/15] Add command to enable/disable interrupts Wolfgang Denk
2008-08-18 23:18 ` Kumar Gala
2008-08-20 22:53 ` Wolfgang Denk
2008-08-18 22:57 ` [U-Boot] [PATCH 02/15] Clean up usage of icache_disable/dcache_disable Wolfgang Denk
2008-08-18 22:55 ` [U-Boot] [PATCH 01/15] Update linux bootm to support ePAPR client interface Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1218806685-3615-4-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox