[U-Boot] [PATCH 3/5] Add fuse API and commands

["Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>]

Hi Dirk,

On Wednesday, August 22, 2012 12:43:05 PM, Dirk Behme wrote:
> On 14.08.2012 14:52, Beno?t Th?baudeau wrote:
> > This can be useful for fuse-like hardware, OTP SoC options, etc.
> 
> For i.MX6, I have a port of the OTP support from Freescale's U-Boot
> to
> our mainline U-Boot in the queue [1].
> 
> As I don't have the overview over the various i.MXxx SoCs and don't
> understand much of this patch below: Should this implement the same
> functionality like my patch [1] for i.MX6?
> 
> Or shall I send my patch [1] to this mailing list for official review
> because the functionality here and there is orthogonal?
> 
> Thanks
> 
> Dirk
> 
> [1]
> https://github.com/dirkbehme/u-boot-imx6/commit/da718b338a79af160f7b7e542fe97b24edbfc36a

This OTP IP is different from the IIM IP of other i.MXs, so having a different
driver for it is fine.

What you can do is implement in your driver the fuse API that I've defined in
this series. In that way, you could drop your common/cmd_imxotp.c and use the
commands from this series. Then, you can send the resulting patches for review.

Best regards,
Beno?t