From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?utf-8?Q?Beno=C3=AEt_Th=C3=A9baudeau?= <benoit.thebaudeau@advansee.com>
Date: Fri, 19 Apr 2013 13:42:04 +0200 (CEST)
Subject: [U-Boot] [PATCH 3/6] arm: imx: Fix u-boot-with-nand-spl.imx
	target
In-Reply-To: <201304191316.31806.marex@denx.de>
References: <1366344655-8535-1-git-send-email-marex@denx.de>
	<1366344655-8535-3-git-send-email-marex@denx.de>
	<1519634250.1869923.1366361788208.JavaMail.root@advansee.com>
	<201304191316.31806.marex@denx.de>
Message-ID: <1220852803.1874173.1366371724801.JavaMail.root@advansee.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear Marek Vasut,

On Friday, April 19, 2013 1:16:31 PM, Marek Vasut wrote:
> Dear Beno?t Th?baudeau,
> 
> > Dear Marek Vasut,
> > 
> > On Friday, April 19, 2013 6:10:52 AM, Marek Vasut wrote:
> > > This target is currently concatenating u-boot SPL in imximage format
> > > with u-boot.bin. The NAND SPL can load a raw binary, but the preffered
> > > format with much less limitations is uImage format. Fix the target
> > > so u-boot.bin is first converted into uImage format and only after
> > > that is concatenated.
> > 
> > Please reword: This is not a fix, but an enhancement.
> > 
> > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
> > > Cc: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
> > > Cc: Fabio Estevam <fabio.estevam@freescale.com>
> > > Cc: Scott Wood <scottwood@freescale.com>
> > > Cc: Stefano Babic <sbabic@denx.de>
> > > Cc: Tom Rini <trini@ti.com>
> > > ---
> > > 
> > >  arch/arm/imx-common/Makefile | 7 +++++--
> > >  1 file changed, 5 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
> > > index 44b6822..ba31d3e 100644
> > > --- a/arch/arm/imx-common/Makefile
> > > +++ b/arch/arm/imx-common/Makefile
> > > @@ -69,8 +69,11 @@ $(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL
> > > $(OBJTREE)/u-boot.bin
> > > 
> > >  		-I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \
> > >  		$(OBJTREE)/spl/u-boot-nand-spl-pad.imx
> > >  	
> > >  	rm $(OBJTREE)/spl/u-boot-nand-spl.imx
> > > 
> > > -	cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
> > > -	rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx
> > > +	$(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
> > > +		-e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \
> > > +		$(OBJTREE)/u-boot.uim
> > > +	cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim > $@
> > > +	rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim
> > > 
> > >  ########################################################################
> > >  #
> > > 
> > > --
> > > 1.7.11.7
> > 
> > This change is correct.
> > 
> > I don't know the uImage format very well. Can you give examples of what
> > this patch can bring compared to the raw binary format?
> > 
> > If this change is useful, it should probably be made for
> > u-boot-with-spl.imx too.
> 
> Please see common/spl/spl_nand.c which calls spl_parse_image_header() on the
> payload loaded from NAND. This is implemented in common/spl/spl.c and if
> proper
> header is not found, the payload is assumed to be of 200kB of size, which is
> far
> less than fully configured U-Boot.

Or you could #define CONFIG_SYS_MONITOR_LEN to what you need.

> So using the uimage format is much more
> flexible.

I agree.

So I'd see the following changes for this patch:
 - Reword "fix" to show enhancement, and detail the flexibility rationale in the
   description.
 - Extend to u-boot-with-spl.imx.

Best regards,
Beno?t