[U-Boot] [PATCH 2/4] ppc4xx: Fix DU440 GPIO configuration

[matthias.fuchs at esd-electronics.com <matthias.fuchs@esd-electronics.com>]

From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
 board/esd/du440/du440.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 8765cc1..5cff9f5 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -52,15 +52,15 @@ int board_early_init_f(void)
 	 * Setup the GPIO pins
 	 */
 	out_be32((void*)GPIO0_OR, 0x00000000 | CFG_GPIO0_EP_EEP);
-	out_be32((void*)GPIO0_TCR, 0x0000000f | CFG_GPIO0_EP_EEP);
+	out_be32((void*)GPIO0_TCR, 0x0000001f | CFG_GPIO0_EP_EEP);
 	out_be32((void*)GPIO0_OSRL, 0x50055400);
-	out_be32((void*)GPIO0_OSRH, 0x550050aa);
+	out_be32((void*)GPIO0_OSRH, 0x55005000);
 	out_be32((void*)GPIO0_TSRL, 0x50055400);
 	out_be32((void*)GPIO0_TSRH, 0x55005000);
 	out_be32((void*)GPIO0_ISR1L, 0x50000000);
 	out_be32((void*)GPIO0_ISR1H, 0x00000000);
 	out_be32((void*)GPIO0_ISR2L, 0x00000000);
-	out_be32((void*)GPIO0_ISR2H, 0x00000100);
+	out_be32((void*)GPIO0_ISR2H, 0x00000000);
 	out_be32((void*)GPIO0_ISR3L, 0x00000000);
 	out_be32((void*)GPIO0_ISR3H, 0x00000000);
 
@@ -73,9 +73,9 @@ int board_early_init_f(void)
 		 CFG_GPIO1_LEDPOST |
 		 CFG_GPIO1_LEDDU);
 	out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU);
-	out_be32((void*)GPIO1_OSRL, 0x5c280000);
+	out_be32((void*)GPIO1_OSRL, 0x0c280000);
 	out_be32((void*)GPIO1_OSRH, 0x00000000);
-	out_be32((void*)GPIO1_TSRL, 0x0c000000);
+	out_be32((void*)GPIO1_TSRL, 0xcc000000);
 	out_be32((void*)GPIO1_TSRH, 0x00000000);
 	out_be32((void*)GPIO1_ISR1L, 0x00005550);
 	out_be32((void*)GPIO1_ISR1H, 0x00000000);
-- 
1.5.3