[U-Boot] [PATCH] AT91: Enable PLLB for USB

[Stelian Pop <stelian@popies.net>]

Le jeudi 06 novembre 2008 ? 20:27 +0100, Jean-Christophe
PLAGNIOL-VILLARD a ?crit :
> On 18:07 Tue 21 Oct     , Stelian Pop wrote:
> > At least some (old ?) versions of the AT91Bootstrap do not set up the
> > PLLB correctly to 48 MHz in order to make USB host function correctly.
> > 
> > This patch sets up the PLLB to the same values Linux uses, and makes USB
> > work ok on the following CPUs:
> > 	- AT91CAP9
> > 	- AT91SAM9260
> > 	- AT91SAM9263
> > 
> > This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
> > the relevant AT91CAP9/AT91SAM9 boards.
> > 
> > Signed-off-by: Stelian Pop <stelian@popies.net>
> > ---
> >  cpu/arm926ejs/at91/usb.c        |   18 ++++++++++++++++++
> >  include/configs/at91cap9adk.h   |    3 +++
> >  include/configs/at91sam9260ek.h |    2 ++
> >  include/configs/at91sam9261ek.h |    1 +
> >  include/configs/at91sam9263ek.h |    2 ++
> >  5 files changed, 26 insertions(+), 0 deletions(-)
> 
> failed to apply
> 
> could you rebase it against u-boot-at91?

Here it is.

Thanks,

Stelian.

--------------------------------