[U-Boot] [PATCH 1/3] 85xx: Add support to populate addr map based on TLB settings

[U-Boot] [PATCH 1/3] 85xx: Add support to populate addr map based on TLB settings

[Kumar Gala]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 cpu/mpc85xx/tlb.c     |   34 ++++++++++++++++++++++++++++++++++
 include/asm-ppc/mmu.h |    3 +++
 lib_ppc/board.c       |    8 ++++++++
 3 files changed, 45 insertions(+), 0 deletions(-)

diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c
index a2d16ae..5b5f791 100644
--- a/cpu/mpc85xx/tlb.c
+++ b/cpu/mpc85xx/tlb.c
@@ -26,6 +26,11 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
 
 void set_tlb(u8 tlb, u32 epn, u64 rpn,
 	     u8 perms, u8 wimge,
@@ -47,6 +52,11 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
 	mtspr(MAS7, _mas7);
 #endif
 	asm volatile("isync;msync;tlbwe;isync");
+
+#ifdef CONFIG_ADDR_MAP
+	if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
+		addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel);
+#endif
 }
 
 void disable_tlb(u8 esel)
@@ -67,6 +77,11 @@ void disable_tlb(u8 esel)
 	mtspr(MAS7, _mas7);
 #endif
 	asm volatile("isync;msync;tlbwe;isync");
+
+#ifdef CONFIG_ADDR_MAP
+	if (gd->flags & GD_FLG_RELOC)
+		addrmap_set_entry(0, 0, 0, esel);
+#endif
 }
 
 void invalidate_tlb(u8 tlb)
@@ -91,6 +106,25 @@ void init_tlbs(void)
 	return ;
 }
 
+#ifdef CONFIG_ADDR_MAP
+void init_addr_map(void)
+{
+	int i;
+
+	for (i = 0; i < num_tlb_entries; i++) {
+		if (tlb_table[i].tlb == 0)
+			continue;
+
+		addrmap_set_entry(tlb_table[i].epn,
+			tlb_table[i].rpn,
+			(1UL << ((tlb_table[i].tsize * 2) + 10)),
+			tlb_table[i].esel);
+	}
+
+	return ;
+}
+#endif
+
 unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
 {
 	unsigned int tlb_size;
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 8975e6c..6d942d0 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -431,6 +431,9 @@ extern void set_tlb(u8 tlb, u32 epn, u64 rpn,
 extern void disable_tlb(u8 esel);
 extern void invalidate_tlb(u8 tlb);
 extern void init_tlbs(void);
+#ifdef CONFIG_ADDR_MAP
+extern void init_addr_map(void);
+#endif
 extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
 
 #define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 289a32a..61c29b5 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -75,6 +75,10 @@
 #include <keyboard.h>
 #endif
 
+#ifdef CONFIG_ADDR_MAP
+#include <asm/mmu.h>
+#endif
+
 #ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
 extern int update_flash_size (int flash_size);
 #endif
@@ -694,6 +698,10 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	 */
 	trap_init (dest_addr);
 
+#if defined(CONFIG_ADDR_MAP) && defined(CONFIG_E500)
+	init_addr_map();
+#endif
+
 #if defined(CONFIG_BOARD_EARLY_INIT_R)
 	board_early_init_r ();
 #endif
-- 
1.5.6.5

[U-Boot] [PATCH 2/3] ppc: Use addrmap in virt_to_phys and map_physmem.

[Kumar Gala]

If we have addr map support enabled use the mapping functions to
implement virt_to_phys() and map_physmem().

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 include/asm-ppc/io.h |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 64cb746..4ddad26 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -10,6 +10,10 @@
 #include <linux/config.h>
 #include <asm/byteorder.h>
 
+#ifdef CONFIG_ADDR_MAP
+#include <addr_map.h>
+#endif
+
 #define SIO_CONFIG_RA   0x398
 #define SIO_CONFIG_RD   0x399
 
@@ -287,7 +291,11 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 static inline void *
 map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
 {
+#ifdef CONFIG_ADDR_MAP
+	return (void *)(addrmap_phys_to_virt(paddr));
+#else
 	return (void *)((unsigned long)paddr);
+#endif
 }
 
 /*
@@ -300,7 +308,11 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags)
 
 static inline phys_addr_t virt_to_phys(void * vaddr)
 {
+#ifdef CONFIG_ADDR_MAP
+	return addrmap_virt_to_phys(vaddr);
+#else
 	return (phys_addr_t)((unsigned long)vaddr);
+#endif
 }
 
 #endif
-- 
1.5.6.5

[U-Boot] [PATCH 3/3] NAND FSL elbc: Use virt_to_phys to determine which bank is in use

[Kumar Gala]

The current code that determines which bank/chipselect is used for a
given NAND instance only worked for 32-bit addresses and assumed
a 1:1 mapping.  This breaks in 36-bit physical configs.

The proper way to handle this is to use the virt_to_phys() and
BR_PHYS_ADDR() routinues to match the 34-bit lbc bus address
with the the virtual address the NAND code uses.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Scott Wood <scottwood@freescale.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 367c7d7..3f318e0 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -718,7 +718,7 @@ static void fsl_elbc_ctrl_init(void)
 int board_nand_init(struct nand_chip *nand)
 {
 	struct fsl_elbc_mtd *priv;
-	uint32_t br, or;
+	uint32_t br = 0, or = 0;
 
 	if (!elbc_ctrl) {
 		fsl_elbc_ctrl_init();
@@ -737,11 +737,13 @@ int board_nand_init(struct nand_chip *nand)
 	 * if we could pass more than one datum to the NAND driver...
 	 */
 	for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
+		phys_addr_t base_addr = virt_to_phys(nand->IO_ADDR_R);
+
 		br = in_be32(&elbc_ctrl->regs->bank[priv->bank].br);
 		or = in_be32(&elbc_ctrl->regs->bank[priv->bank].or);
 
 		if ((br & BR_V) && (br & BR_MSEL) == BR_MS_FCM &&
-		    (br & or & BR_BA) == (phys_addr_t)nand->IO_ADDR_R)
+		    (br & or & BR_BA) == BR_PHYS_ADDR(base_addr))
 			break;
 	}
 
-- 
1.5.6.5