[U-Boot] [PATCH] 85xx: Fix address map for 36-bit config of MPC8572DS

[Kumar Gala <galak@kernel.crashing.org>]

When we introduced the 36-bit config of the MPC8572DS board we had the
wrong PCI MEM bus address map.  Additionally, the change to the address
map exposes a small issue in our dummy read on the ULI bus.  We need
to use the new mapping functions to handle that read properly in the
36-bit config.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 board/freescale/mpc8572ds/mpc8572ds.c |    6 ++++--
 include/configs/MPC8572DS.h           |    9 ++++++---
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 4c9af74..c8b3966 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -216,8 +216,10 @@ void pci_init_board(void)
 			pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
 					PCI_BASE_ADDRESS_1, &temp32);
 			if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
-				debug(" uli1572 read to %x\n", temp32);
-				in_be32((unsigned *)temp32);
+				void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
+								temp32, 4, 0);
+				debug(" uli1572 read to %p\n", p);
+				in_be32(p);
 			}
 		} else {
 			printf ("    PCIE3: disabled\n");
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index a2360d8..b60b364 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -404,10 +404,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 /* controller 3, direct to uli, tgtid 3, Base address 8000 */
 #define CONFIG_SYS_PCIE3_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
 #ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
 #define CONFIG_SYS_PCIE3_MEM_PHYS	0xc00000000ull
 #else
+#define CONFIG_SYS_PCIE3_MEM_BUS	0x80000000
 #define CONFIG_SYS_PCIE3_MEM_PHYS	0x80000000
 #endif
 #define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
@@ -422,10 +423,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
 #define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
 #ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xc0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
 #else
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
 #endif
 #define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
@@ -440,10 +442,11 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
 #define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
 #ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
 #else
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
 #endif
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
-- 
1.5.6.6