public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Detlev Zundel <dzu@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface.
Date: Wed, 25 Mar 2009 17:27:54 +0100	[thread overview]
Message-ID: <1237998478-18452-4-git-send-email-dzu@denx.de> (raw)
In-Reply-To: <1237998478-18452-3-git-send-email-dzu@denx.de>

This pretty unintelligent interface is used on some RTC chips.

Signed-off-by: Detlev Zundel <dzu@denx.de>
---
 Makefile                    |    3 +-
 drivers/twserial/Makefile   |   46 ++++++++++++++++++
 drivers/twserial/soft_tws.c |  110 +++++++++++++++++++++++++++++++++++++++++++
 include/tws.h               |   47 ++++++++++++++++++
 4 files changed, 205 insertions(+), 1 deletions(-)
 create mode 100644 drivers/twserial/Makefile
 create mode 100644 drivers/twserial/soft_tws.c
 create mode 100644 include/tws.h

diff --git a/Makefile b/Makefile
index 63b9909..7c37845 100644
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2008
+# (C) Copyright 2000-2009
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -262,6 +262,7 @@ TAG_SUBDIRS += cpu/mpc8xxx
 endif
 LIBS += drivers/rtc/librtc.a
 LIBS += drivers/serial/libserial.a
+LIBS += drivers/twserial/libtws.a
 LIBS += drivers/usb/libusb.a
 LIBS += drivers/video/libvideo.a
 LIBS += common/libcommon.a
diff --git a/drivers/twserial/Makefile b/drivers/twserial/Makefile
new file mode 100644
index 0000000..0b059f3
--- /dev/null
+++ b/drivers/twserial/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2009
+# Detlev Zundel, DENX Software Engineering, dzu at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	:= $(obj)libtws.a
+
+COBJS-$(CONFIG_SOFT_TWS) += soft_tws.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/twserial/soft_tws.c b/drivers/twserial/soft_tws.c
new file mode 100644
index 0000000..f63fc3f
--- /dev/null
+++ b/drivers/twserial/soft_tws.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2009
+ * Detlev Zundel, DENX Software Engineering, dzu at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#define TWS_IMPLEMENTATION
+#include <common.h>
+
+/*=====================================================================*/
+/*                         Public Functions                            */
+/*=====================================================================*/
+
+/*-----------------------------------------------------------------------
+ * Read bits
+ */
+int tws_read(uchar *buffer, int len)
+{
+	int rem = len;
+	uchar accu, shift;
+
+	debug("tws_read: buffer %p len %d\n", buffer, len);
+
+	/* Configure the data pin for input */
+	tws_data_config_output(0);
+
+	/* Disable WR, i.e. setup a read */
+	tws_wr(0);
+	udelay(1);
+
+	/* Rise CE */
+	tws_ce(1);
+	udelay(1);
+
+	for (; rem > 0; ) {
+		for (shift = 0, accu = 0;
+		     (rem > 0) && (shift < 8);
+		     rem--, shift++) {
+			tws_clk(1);
+			udelay(10);
+			accu |= (tws_data_read() << shift); /* LSB first */
+			tws_clk(0);
+			udelay(10);
+		}
+		*buffer++ = accu;
+	}
+
+	/* Lower CE */
+	tws_ce(0);
+
+	return len - rem;
+}
+
+
+/*-----------------------------------------------------------------------
+ * Write bits
+ */
+int tws_write(uchar *buffer, int len)
+{
+	int rem = len;
+	uchar accu, shift;
+	debug("tws_write: buffer %p len %d\n", buffer, len);
+
+	/* Configure the data pin for output */
+	tws_data_config_output(1);
+
+	/* Enable WR, i.e. setup a write */
+	tws_wr(1);
+	udelay(1);
+
+	/* Rise CE */
+	tws_ce(1);
+	udelay(1);
+
+	for (; rem > 0; ) {
+		for (shift = 0, accu = *buffer++;
+		     (rem > 0) && (shift < 8);
+		     rem--, shift++) {
+			tws_data(accu & 0x01); /* LSB first */
+			tws_clk(1);
+			udelay(10);
+			tws_clk(0);
+			udelay(10);
+			accu >>= 1;
+		}
+	}
+
+	/* Lower CE */
+	tws_ce(0);
+
+	return len - rem;
+}
diff --git a/include/tws.h b/include/tws.h
new file mode 100644
index 0000000..bfa8d58
--- /dev/null
+++ b/include/tws.h
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2009
+ * Detlev Zundel, DENX Software Engineering, dzu at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _TWS_H_
+#define _TWS_H_
+
+#ifndef TWS_SOFT_DECLARATIONS
+# if defined(CONFIG_MPC5xxx)
+#  define TWS_SOFT_DECLARATIONS \
+ volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
+# else
+#  define TWS_SOFT_DECLARATIONS
+# endif
+#endif
+
+/*
+ * Read/Write interface:
+ *   buffer:  Where to read/write the data
+ *   len:     How many bits to read/write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+int tws_read(uchar *buffer, int len);
+int tws_write(uchar *buffer, int len);
+
+#endif	/* _TWS_H_ */
-- 
1.6.0.6

  reply	other threads:[~2009-03-25 16:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-25 16:27 [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features Detlev Zundel
2009-03-25 16:27 ` [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot Detlev Zundel
2009-03-25 16:27   ` [U-Boot] [PATCH v2 2/7] mpc5xxx: Add structure definition for several more register blocks Detlev Zundel
2009-03-25 16:27     ` Detlev Zundel [this message]
2009-03-25 16:27       ` [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON) Detlev Zundel
2009-03-25 16:27         ` [U-Boot] [PATCH v2 5/7] inka4x0: Add hardware diagnosis functions for inka4x0 Detlev Zundel
2009-03-25 16:27           ` [U-Boot] [PATCH v2 6/7] inka4x0: Add hardware diagnosis and RTC in configuration Detlev Zundel
2009-03-25 16:27             ` [U-Boot] [PATCH v2 7/7] inka4x0: Use proper accessor macros for memory mapped registers Detlev Zundel
2009-03-27 10:33         ` [U-Boot] [PATCH v2 4/7] rtc: add support for 4543 RTC (manufactured by e.g. EPSON) Anatolij Gustschin
2009-03-27 10:51           ` Wolfgang Denk
2009-03-27 11:13           ` Detlev Zundel
2009-03-27 12:43             ` Anatolij Gustschin
2009-03-27 12:53               ` Jerry Van Baren
2009-03-27 13:00                 ` Detlev Zundel
2009-03-27 16:06                 ` Scott Wood
2009-03-25 19:19       ` [U-Boot] [PATCH v2 3/7] drivers/twserial: Add protocol driver for "three wire serial" interface Wolfgang Denk
2009-03-26  9:33         ` Detlev Zundel
2009-03-26 15:23           ` Detlev Zundel
2009-03-27 20:08             ` Wolfgang Denk
2009-03-27 10:02       ` Anatolij Gustschin
2009-03-27 10:33         ` Detlev Zundel
2009-03-27 20:06   ` [U-Boot] [PATCH v2 1/7] command.c: Expose the core of do_help as _do_help to the rest of u-boot Wolfgang Denk
2009-03-25 16:36 ` [U-Boot] [PATCH v2 0/7] Update for inka4x0 plus some new features Detlev Zundel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1237998478-18452-4-git-send-email-dzu@denx.de \
    --to=dzu@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox