From: Tom Rix <Tom.Rix@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 03/10] ZOOM2 Add support for debug board detection.
Date: Tue, 14 Apr 2009 09:40:56 -0500 [thread overview]
Message-ID: <1239720063-20004-3-git-send-email-Tom.Rix@windriver.com> (raw)
In-Reply-To: <1239720063-20004-2-git-send-email-Tom.Rix@windriver.com>
The logicpd web site is a good source for general information on this board.
Please start looking here if the below links are broken.
http://www.logicpd.com
This is a pdf of the product
http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf
This is a pdf of the product quick start guide.
The debug board is described here.
http://support.logicpd.com/downloads/1165/
This is a wiki showing the debug board in use
https://omapzoom.org/gf/project/omapzoom/wiki/?pagename=GettingStartedWithZoomII_AKA_OMAP34XII_MDP
The zoom2 has an auxillary board that contains the serial, net, jtag and
battery simulator. This change supports a runtime check if the debug board is
connected.
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
---
board/omap3/zoom2/Makefile | 3 +-
board/omap3/zoom2/debug_board.c | 58 +++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+), 1 deletions(-)
create mode 100644 board/omap3/zoom2/debug_board.c
diff --git a/board/omap3/zoom2/Makefile b/board/omap3/zoom2/Makefile
index 088b8cb..b8fa5a7 100644
--- a/board/omap3/zoom2/Makefile
+++ b/board/omap3/zoom2/Makefile
@@ -25,7 +25,8 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
-COBJS := zoom2.o
+COBJS := zoom2.o \
+ debug_board.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/omap3/zoom2/debug_board.c b/board/omap3/zoom2/debug_board.c
new file mode 100644
index 0000000..55553c9
--- /dev/null
+++ b/board/omap3/zoom2/debug_board.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
+
+#define DEBUG_BOARD_CONNECTED 1
+#define DEBUG_BOARD_NOT_CONNECTED 0
+
+static int debug_board_connected = DEBUG_BOARD_CONNECTED;
+
+static void zoom2_debug_board_detect (void)
+{
+ int val = 0;
+ if (!omap_request_gpio(158)) {
+ /*
+ * GPIO to query for debug board
+ * 158 db board query
+ */
+ omap_set_gpio_direction(158, 1);
+ val = omap_get_gpio_datain(158);
+ omap_free_gpio(158);
+ }
+
+ if (!val)
+ debug_board_connected = DEBUG_BOARD_NOT_CONNECTED;
+}
+
+int zoom2_debug_board_connected (void)
+{
+ static int first_time = 1;
+
+ if (first_time) {
+ zoom2_debug_board_detect ();
+ first_time = 0;
+ }
+ return debug_board_connected;
+}
--
1.6.0.5
next prev parent reply other threads:[~2009-04-14 14:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-14 14:40 [U-Boot] [PATCH 01/10] ZOOM2 Add initial support for Zoom2 Tom Rix
2009-04-14 14:40 ` [U-Boot] [PATCH 02/10] OMAP3 Port kernel omap gpio interface Tom Rix
2009-04-14 14:40 ` Tom Rix [this message]
2009-04-14 14:40 ` [U-Boot] [PATCH 04/10] ZOOM2 Add serial support Tom Rix
2009-04-14 14:40 ` [U-Boot] [PATCH 05/10] ZOOM2: rename timer divisor Tom Rix
2009-04-14 14:40 ` [U-Boot] [PATCH 06/10] LED Add documentation describing the status_led and colour led API Tom Rix
2009-04-14 14:41 ` [U-Boot] [PATCH 07/10] ARM Add blue colour LED to status_led Tom Rix
2009-04-14 14:41 ` [U-Boot] [PATCH 08/10] ZOOM2 Add led support Tom Rix
2009-04-14 14:41 ` [U-Boot] [PATCH 09/10] ZOOM1 Remove more legacy NAND defines Tom Rix
2009-04-14 14:41 ` [U-Boot] [PATCH 10/10] OMAP Consolidate common u-boot.lds to cpu layer Tom Rix
2009-04-26 22:01 ` [U-Boot] [PATCH 09/10] ZOOM1 Remove more legacy NAND defines Jean-Christophe PLAGNIOL-VILLARD
2009-04-24 21:35 ` [U-Boot] [PATCH 08/10] ZOOM2 Add led support Jean-Christophe PLAGNIOL-VILLARD
2009-04-26 22:02 ` [U-Boot] [PATCH 07/10] ARM Add blue colour LED to status_led Jean-Christophe PLAGNIOL-VILLARD
2009-04-28 1:30 ` Tom
2009-04-26 22:01 ` [U-Boot] [PATCH 06/10] LED Add documentation describing the status_led and colour led API Jean-Christophe PLAGNIOL-VILLARD
2009-04-24 21:31 ` [U-Boot] [PATCH 05/10] ZOOM2: rename timer divisor Jean-Christophe PLAGNIOL-VILLARD
2009-04-24 21:26 ` [U-Boot] [PATCH 01/10] ZOOM2 Add initial support for Zoom2 Jean-Christophe PLAGNIOL-VILLARD
2009-04-24 21:38 ` Jean-Christophe PLAGNIOL-VILLARD
2009-04-24 22:10 ` Wolfgang Denk
2009-04-26 22:05 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1239720063-20004-3-git-send-email-Tom.Rix@windriver.com \
--to=tom.rix@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox