From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/5] 74xx_7xx: CPCI750: Enable access to PCI function > 0
Date: Thu, 4 Jun 2009 13:35:38 +0200 [thread overview]
Message-ID: <1244115339-19862-4-git-send-email-sr@denx.de> (raw)
In-Reply-To: <1244115339-19862-1-git-send-email-sr@denx.de>
The Marvell bridge 64360 supports serveral PCI functions, not only 0. This
patch enables access to those functions.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
---
board/esd/cpci750/cpci750.c | 16 +++++++++++-----
board/esd/cpci750/pci.c | 14 +++++++++-----
2 files changed, 20 insertions(+), 10 deletions(-)
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 69ae517..18944ef 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -187,6 +187,7 @@ original ppcboot 1.1.6 source end */
static void gt_pci_config (void)
{
unsigned int stat;
+ unsigned int data;
unsigned int val = 0x00fff864; /* DINK32: BusNum 23:16, DevNum 15:11, FuncNum 10:8, RegNum 7:2 */
/* In PCIX mode devices provide their own bus and device numbers. We query the Discovery II's
@@ -254,10 +255,11 @@ static void gt_pci_config (void)
/*ronen update the pci internal registers base address.*/
#ifdef MAP_PCI
- for (stat = 0; stat <= PCI_HOST1; stat++)
- pciWriteConfigReg (stat,
- PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS,
- SELF, CONFIG_SYS_GT_REGS);
+ for (stat = 0; stat <= PCI_HOST1; stat++) {
+ data = pciReadConfigReg(stat, PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS, SELF);
+ data = (data & 0x0f) | CONFIG_SYS_GT_REGS;
+ pciWriteConfigReg (stat, PCI_INTERNAL_REGISTERS_MEMORY_MAPPED_BASE_ADDRESS, SELF, data);
+ }
#endif
}
@@ -451,9 +453,13 @@ int misc_init_r ()
void after_reloc (ulong dest_addr, gd_t * gd)
{
- memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE, CONFIG_SYS_BOOT_SIZE);
+ memoryMapDeviceSpace (BOOT_DEVICE, CONFIG_SYS_BOOT_SPACE,
+ CONFIG_SYS_BOOT_SIZE);
display_mem_map ();
+ GT_REG_WRITE (PCI_0BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+ GT_REG_WRITE (PCI_1BASE_ADDRESS_REGISTERS_ENABLE, 0xfffffdfe);
+
/* now, jump to the main ppcboot board init code */
board_init_r (gd, dest_addr);
/* NOTREACHED */
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
index bfc7e55..3b59b16 100644
--- a/board/esd/cpci750/pci.c
+++ b/board/esd/cpci750/pci.c
@@ -768,11 +768,12 @@ static int gt_read_config_dword (struct pci_controller *hose,
int bus = PCI_BUS (dev);
if ((bus == local_buses[0]) || (bus == local_buses[1])) {
- *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
+ offset | (PCI_FUNC(dev) << 8),
PCI_DEV (dev));
} else {
- *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
- cfg_addr, offset,
+ *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->cfg_addr,
+ offset | (PCI_FUNC(dev) << 8),
PCI_DEV (dev), bus);
}
@@ -785,13 +786,16 @@ static int gt_write_config_dword (struct pci_controller *hose,
int bus = PCI_BUS (dev);
if ((bus == local_buses[0]) || (bus == local_buses[1])) {
- pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
+ pciWriteConfigReg ((PCI_HOST) hose->cfg_addr,
+ offset | (PCI_FUNC(dev) << 8),
PCI_DEV (dev), value);
} else {
pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
- offset, PCI_DEV (dev), bus,
+ offset | (PCI_FUNC(dev) << 8),
+ PCI_DEV (dev), bus,
value);
}
+
return 0;
}
--
1.6.2.5
next prev parent reply other threads:[~2009-06-04 11:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-04 11:35 [U-Boot] [PATCH 1/5] 74xx_7xx: CPCI750: Add commandline editing/history Stefan Roese
2009-06-04 11:35 ` [U-Boot] [PATCH 2/5] 74xx_7xx: CPCI750: Add loadpci command Stefan Roese
2009-06-04 17:40 ` Matthias Fuchs
2009-06-05 3:39 ` Stefan Roese
2009-06-05 10:54 ` Matthias Fuchs
2009-06-12 12:53 ` Wolfgang Denk
2009-06-04 11:35 ` [U-Boot] [PATCH 3/5] 74xx_7xx: CPCI750: Minor coding style cleanup of cpci750.c Stefan Roese
2009-06-12 12:54 ` Wolfgang Denk
2009-06-04 11:35 ` Stefan Roese [this message]
2009-06-04 17:43 ` [U-Boot] [PATCH 4/5] 74xx_7xx: CPCI750: Enable access to PCI function > 0 Matthias Fuchs
2009-06-04 11:35 ` [U-Boot] [PATCH 5/5] 74xx_7xx: CPCI750: Add CPCI adapter/target support Stefan Roese
2009-06-12 12:56 ` Wolfgang Denk
2009-06-12 12:52 ` [U-Boot] [PATCH 1/5] 74xx_7xx: CPCI750: Add commandline editing/history Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244115339-19862-4-git-send-email-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox