[U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

* [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates
@ 2009-07-07 21:29 Grazvydas Ignotas
  2009-07-07 21:29 ` [U-Boot] [PATCH 1/4] OMAP3 pandora: pin mux cleanup Grazvydas Ignotas
  2009-07-08 22:44 ` [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates Jean-Christophe PLAGNIOL-VILLARD
  0 siblings, 2 replies; 7+ messages in thread
From: Grazvydas Ignotas @ 2009-07-07 21:29 UTC (permalink / raw)
  To: u-boot

This patch series clean up and update pin mux for pandora.
The update is needed for rev3 or later boards to work properly,
but older boards still work after this.

Grazvydas Ignotas (4):
  OMAP3 pandora: pin mux cleanup
  OMAP3 pandora: setup pin mux for pins used on rev3 boards
  OMAP3 pandora: setup pulls for various GPIOs
  OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh

 board/omap3/pandora/pandora.h |   86 +++++++++++++++++------------------------
 1 files changed, 35 insertions(+), 51 deletions(-)

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 1/4] OMAP3 pandora: pin mux cleanup
  2009-07-07 21:29 [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates Grazvydas Ignotas
@ 2009-07-07 21:29 ` Grazvydas Ignotas
  2009-07-07 21:29   ` [U-Boot] [PATCH 2/4] OMAP3 pandora: setup pin mux for pins used on rev3 boards Grazvydas Ignotas
  2009-07-08 22:44 ` [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates Jean-Christophe PLAGNIOL-VILLARD
  1 sibling, 1 reply; 7+ messages in thread
From: Grazvydas Ignotas @ 2009-07-07 21:29 UTC (permalink / raw)
  To: u-boot

Remove configuration of not unused pins, effectively
leaving them in safe mode.
---
 board/omap3/pandora/pandora.h |   25 -------------------------
 1 files changed, 0 insertions(+), 25 deletions(-)

diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index 8f0838c..3d04b2a 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -107,15 +107,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
  MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
  MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
- MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
- MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0))\
- MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M1))\
- MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1))\
- MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M0))\
- MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0))\
  MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
  MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
  MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
@@ -254,16 +245,10 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(CAM_WEN),		(IEN  | PTU | DIS | M4)) /*GPIO_167*/\
 							 /* - nIRQ_NUB2*/\
  /*Various other stuff*/\
- MUX_VAL(CP(CAM_VS),		(IEN  | PTU | DIS | M4)) /*GPIO_95*/\
-							 /* - nTOUCH_BUSY*/\
  MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | DIS | M4)) /*GPIO_163*/\
 							 /* - nOC_USB5*/\
- MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_162*/\
-							 /* - START_ADC*/\
  MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_22*/\
 							 /* - MSECURE*/\
- MUX_VAL(CP(CAM_STROBE),	(IEN  | PTU | DIS | M4)) /*GPIO_126*/\
-							 /* - HP_DETECT*/\
  /*External Resets and Enables*/\
  MUX_VAL(CP(ETK_D0_ES2),	(IDIS | PTD | DIS | M4)) /*GPIO_14*/\
 							 /* - nHDPHN_SHUTDOWN*/\
@@ -277,14 +262,6 @@ const omap3_sysinfo sysinfo = {
 							 /* - RESET_NUBS*/\
  MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTU | EN  | M4)) /*GPIO_164*/\
 							 /* - EN_USB_5V*/\
- /*Unused*/\
- MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M0)) /*HDQ_SIO - NC*/\
- MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0 - NC*/\
- MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0 - NC*/\
- MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1 - NC*/\
- MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) /*CSI2_DY1 - NC*/\
- MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) /*I2C2_SCL - NC*/\
- MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) /*I2C2_SDA - NC*/\
  /*HS USB OTG Port (connects to HSUSB0)*/\
  MUX_VAL(CP(HSUSB0_CLK),	(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
  MUX_VAL(CP(HSUSB0_STP),	(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
@@ -338,8 +315,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
  MUX_VAL(CP(SYS_BOOT6),		(IEN  | PTD | DIS | M4)) /*GPIO_8*/\
  MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
- MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M4)) /*SYS_CLKOUT1 - NC*/\
- MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTD | DIS | M4)) /*SYS_CLKOUT2 - NC*/\
  /*JTAG*/\
  MUX_VAL(CP(JTAG_nTRST),	(IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
  MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
-- 
1.5.6.3

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 2/4] OMAP3 pandora: setup pin mux for pins used on rev3 boards
  2009-07-07 21:29 ` [U-Boot] [PATCH 1/4] OMAP3 pandora: pin mux cleanup Grazvydas Ignotas
@ 2009-07-07 21:29   ` Grazvydas Ignotas
  2009-07-07 21:30     ` [U-Boot] [PATCH 3/4] OMAP3 pandora: setup pulls for various GPIOs Grazvydas Ignotas
  0 siblings, 1 reply; 7+ messages in thread
From: Grazvydas Ignotas @ 2009-07-07 21:29 UTC (permalink / raw)
  To: u-boot

Setup pin mux for GPIO pins connected on rev3 or later
boards. Also change NUB2 IRQ pin. This should not affect
older boards because they don't have any nubs (analog
controllers) attached to them.
---
 board/omap3/pandora/pandora.h |   11 ++++++++++-
 1 files changed, 10 insertions(+), 1 deletions(-)

diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index 3d04b2a..1bd3d30 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -242,13 +242,15 @@ const omap3_sysinfo sysinfo = {
 							 /* - WIFI_IRQ*/\
  MUX_VAL(CP(MCBSP1_FSX),	(IEN  | PTD | DIS | M4)) /*GPIO_161*/\
 							 /* - nIRQ_NUB1*/\
- MUX_VAL(CP(CAM_WEN),		(IEN  | PTU | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTU | DIS | M4)) /*GPIO_162*/\
 							 /* - nIRQ_NUB2*/\
  /*Various other stuff*/\
  MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | DIS | M4)) /*GPIO_163*/\
 							 /* - nOC_USB5*/\
  MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_22*/\
 							 /* - MSECURE*/\
+ MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M4)) /*GPIO_115*/\
+							 /* - POP_OVERHEAT*/\
  /*External Resets and Enables*/\
  MUX_VAL(CP(ETK_D0_ES2),	(IDIS | PTD | DIS | M4)) /*GPIO_14*/\
 							 /* - nHDPHN_SHUTDOWN*/\
@@ -262,6 +264,13 @@ const omap3_sysinfo sysinfo = {
 							 /* - RESET_NUBS*/\
  MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTU | EN  | M4)) /*GPIO_164*/\
 							 /* - EN_USB_5V*/\
+ /*Spare GPIOs*/\
+ MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTD | EN  | M4)) /*GPIO_58*/\
+ MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTD | EN  | M4)) /*GPIO_64*/\
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTD | EN  | M4)) /*GPIO_65*/\
+ MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M4)) /*GPIO_95*/\
+ MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | EN  | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(HDQ_SIO),		(IEN  | PTD | EN  | M4)) /*GPIO_170*/\
  /*HS USB OTG Port (connects to HSUSB0)*/\
  MUX_VAL(CP(HSUSB0_CLK),	(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
  MUX_VAL(CP(HSUSB0_STP),	(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
-- 
1.5.6.3

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 3/4] OMAP3 pandora: setup pulls for various GPIOs
  2009-07-07 21:29   ` [U-Boot] [PATCH 2/4] OMAP3 pandora: setup pin mux for pins used on rev3 boards Grazvydas Ignotas
@ 2009-07-07 21:30     ` Grazvydas Ignotas
  2009-07-07 21:30       ` [U-Boot] [PATCH 4/4] OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh Grazvydas Ignotas
  0 siblings, 1 reply; 7+ messages in thread
From: Grazvydas Ignotas @ 2009-07-07 21:30 UTC (permalink / raw)
  To: u-boot

Set pullups or pulldowns for GPIOs which need them.
Disable them for others, which have external pulls.
Also make disabled pull setting consistent (some pins had
type set to "up" even if pull type selection was disabled).
---
 board/omap3/pandora/pandora.h |   50 ++++++++++++++++++++--------------------
 1 files changed, 25 insertions(+), 25 deletions(-)

diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index 1bd3d30..dfaf32f 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -145,26 +145,26 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(DSS_DATA22),	(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
  MUX_VAL(CP(DSS_DATA23),	(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
  /*GPIO based game buttons*/\
- MUX_VAL(CP(CAM_XCLKA),		(IEN  | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\
- MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | DIS | M4)) /*GPIO_97 - L2*/\
- MUX_VAL(CP(CAM_FLD),		(IEN  | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\
- MUX_VAL(CP(CAM_D0),		(IEN  | PTU | DIS | M4)) /*GPIO_99 - MENU*/\
- MUX_VAL(CP(CAM_D1),		(IEN  | PTU | DIS | M4)) /*GPIO_100 - START*/\
- MUX_VAL(CP(CAM_D2),		(IEN  | PTU | DIS | M4)) /*GPIO_101 - Y*/\
- MUX_VAL(CP(CAM_D3),		(IEN  | PTU | DIS | M4)) /*GPIO_102 - L1*/\
- MUX_VAL(CP(CAM_D4),		(IEN  | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\
- MUX_VAL(CP(CAM_D5),		(IEN  | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\
- MUX_VAL(CP(CAM_D6),		(IEN  | PTU | DIS | M4)) /*GPIO_105 - R1*/\
- MUX_VAL(CP(CAM_D7),		(IEN  | PTU | DIS | M4)) /*GPIO_106 - B*/\
- MUX_VAL(CP(CAM_D8),		(IEN  | PTU | DIS | M4)) /*GPIO_107 - R2*/\
- MUX_VAL(CP(CAM_D10),		(IEN  | PTU | DIS | M4)) /*GPIO_109 - X*/\
- MUX_VAL(CP(CAM_D11),		(IEN  | PTU | DIS | M4)) /*GPIO_110 - UP*/\
- MUX_VAL(CP(CAM_XCLKB),		(IEN  | PTU | DIS | M4)) /*GPIO_111 - A*/\
+ MUX_VAL(CP(CAM_XCLKA),		(IEN  | PTD | DIS | M4)) /*GPIO_96 - LEFT*/\
+ MUX_VAL(CP(CAM_PCLK),		(IEN  | PTD | DIS | M4)) /*GPIO_97 - L2*/\
+ MUX_VAL(CP(CAM_FLD),		(IEN  | PTD | DIS | M4)) /*GPIO_98 - RIGHT*/\
+ MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M4)) /*GPIO_99 - MENU*/\
+ MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M4)) /*GPIO_100 - START*/\
+ MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M4)) /*GPIO_101 - Y*/\
+ MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M4)) /*GPIO_102 - L1*/\
+ MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M4)) /*GPIO_103 - DOWN*/\
+ MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M4)) /*GPIO_104 - SELECT*/\
+ MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M4)) /*GPIO_105 - R1*/\
+ MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M4)) /*GPIO_106 - B*/\
+ MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M4)) /*GPIO_107 - R2*/\
+ MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M4)) /*GPIO_109 - X*/\
+ MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M4)) /*GPIO_110 - UP*/\
+ MUX_VAL(CP(CAM_XCLKB),		(IEN  | PTD | DIS | M4)) /*GPIO_111 - A*/\
  /*Audio Interface To External DAC (Headphone, Speakers)*/\
  MUX_VAL(CP(MCBSP2_FSX),	(IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\
  MUX_VAL(CP(MCBSP2_CLKX),	(IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\
  MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTD | DIS | M0)) /*McBSP_CLKS*/\
  MUX_VAL(CP(MCBSP2_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_118*/\
 							 /* - nPOWERDOWN_DAC*/\
  /*Expansion card 1*/\
@@ -210,13 +210,13 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP4_DX),		(IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\
  MUX_VAL(CP(MCBSP4_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP4_FSX*/\
  /*GPIO definitions for muxed pins on AV connector*/\
- MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M4)) /*GPIO_144,*/\
+ MUX_VAL(CP(UART2_CTS),		(IEN  | PTD | EN  | M4)) /*GPIO_144,*/\
 							 /*UART2_CTS*/\
- MUX_VAL(CP(UART2_RTS),		(IEN  | PTU | DIS | M4)) /*GPIO_145,*/\
+ MUX_VAL(CP(UART2_RTS),		(IEN  | PTD | EN  | M4)) /*GPIO_145,*/\
 							 /*UART2_RTS*/\
- MUX_VAL(CP(UART2_TX),		(IEN  | PTU | EN  | M4)) /*GPIO_146,*/\
+ MUX_VAL(CP(UART2_TX),		(IEN  | PTD | EN  | M4)) /*GPIO_146,*/\
 							 /*UART2_TX*/\
- MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147,*/\
+ MUX_VAL(CP(UART2_RX),		(IEN  | PTD | EN  | M4)) /*GPIO_147,*/\
 							 /*UART2_RX*/\
  /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\
  MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX*/\
@@ -231,18 +231,18 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_159*/\
 							 /* - LED_WIFI*/\
  /*Switches*/\
- MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTU | DIS | M4)) /*GPIO_176*/\
+ MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTD | DIS | M4)) /*GPIO_176*/\
 							 /* - nHOLD_SWITCH*/\
- MUX_VAL(CP(CAM_D9),		(IEN  | PTU | DIS | M4)) /*GPIO_108*/\
+ MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M4)) /*GPIO_108*/\
 							 /* - nLID_SWITCH*/\
  /*External IRQs*/\
- MUX_VAL(CP(CAM_HS),		(IEN  | PTU | DIS | M4)) /*GPIO_94*/\
+ MUX_VAL(CP(CAM_HS),		(IEN  | PTD | DIS | M4)) /*GPIO_94*/\
 							 /* - nTOUCH_IRQ*/\
  MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_21*/\
 							 /* - WIFI_IRQ*/\
  MUX_VAL(CP(MCBSP1_FSX),	(IEN  | PTD | DIS | M4)) /*GPIO_161*/\
 							 /* - nIRQ_NUB1*/\
- MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTU | DIS | M4)) /*GPIO_162*/\
+ MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_162*/\
 							 /* - nIRQ_NUB2*/\
  /*Various other stuff*/\
  MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | DIS | M4)) /*GPIO_163*/\
@@ -262,7 +262,7 @@ const omap3_sysinfo sysinfo = {
 							 /* - nLCD_RESET*/\
  MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /*GPIO_156*/\
 							 /* - RESET_NUBS*/\
- MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTU | EN  | M4)) /*GPIO_164*/\
+ MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M4)) /*GPIO_164*/\
 							 /* - EN_USB_5V*/\
  /*Spare GPIOs*/\
  MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTD | EN  | M4)) /*GPIO_58*/\
-- 
1.5.6.3

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 4/4] OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh
  2009-07-07 21:30     ` [U-Boot] [PATCH 3/4] OMAP3 pandora: setup pulls for various GPIOs Grazvydas Ignotas
@ 2009-07-07 21:30       ` Grazvydas Ignotas
  0 siblings, 0 replies; 7+ messages in thread
From: Grazvydas Ignotas @ 2009-07-07 21:30 UTC (permalink / raw)
  To: u-boot

Pandora is using both SDRC CSes. The MUX setting is needed
for the second CS clock signal to allow the 2 RAM parts to
be put in self-refresh correctly.

Based on similar patch for beagle and overo by
Jean Pihet and Steve Sakoman.
---
 board/omap3/pandora/pandora.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index dfaf32f..f06ee5b 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -396,6 +396,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
  MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
  MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
- MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
+ MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
 
 #endif
-- 
1.5.6.3

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates
  2009-07-07 21:29 [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates Grazvydas Ignotas
  2009-07-07 21:29 ` [U-Boot] [PATCH 1/4] OMAP3 pandora: pin mux cleanup Grazvydas Ignotas
@ 2009-07-08 22:44 ` Jean-Christophe PLAGNIOL-VILLARD
  2009-07-09 12:20   ` Grazvydas Ignotas
  1 sibling, 1 reply; 7+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2009-07-08 22:44 UTC (permalink / raw)
  To: u-boot

On 00:29 Wed 08 Jul     , Grazvydas Ignotas wrote:
> This patch series clean up and update pin mux for pandora.
> The update is needed for rev3 or later boards to work properly,
> but older boards still work after this.
> 
> Grazvydas Ignotas (4):
>   OMAP3 pandora: pin mux cleanup
>   OMAP3 pandora: setup pin mux for pins used on rev3 boards
>   OMAP3 pandora: setup pulls for various GPIOs
>   OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh
> 
>  board/omap3/pandora/pandora.h |   86 +++++++++++++++++------------------------
>  1 files changed, 35 insertions(+), 51 deletions(-)
> 
what is the status of the precedent rev at the end of the patch series?

Best Regards,
J.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates
  2009-07-08 22:44 ` [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates Jean-Christophe PLAGNIOL-VILLARD
@ 2009-07-09 12:20   ` Grazvydas Ignotas
  0 siblings, 0 replies; 7+ messages in thread
From: Grazvydas Ignotas @ 2009-07-09 12:20 UTC (permalink / raw)
  To: u-boot

On Thu, Jul 9, 2009 at 1:44 AM, Jean-Christophe
PLAGNIOL-VILLARD<plagnioj@jcrosoft.com> wrote:
> On 00:29 Wed 08 Jul ? ? , Grazvydas Ignotas wrote:
>> This patch series clean up and update pin mux for pandora.
>> The update is needed for rev3 or later boards to work properly,
>> but older boards still work after this.
>>
>> Grazvydas Ignotas (4):
>> ? OMAP3 pandora: pin mux cleanup
>> ? OMAP3 pandora: setup pin mux for pins used on rev3 boards
>> ? OMAP3 pandora: setup pulls for various GPIOs
>> ? OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh
>>
>> ?board/omap3/pandora/pandora.h | ? 86 +++++++++++++++++------------------------
>> ?1 files changed, 35 insertions(+), 51 deletions(-)
>>
> what is the status of the precedent rev at the end of the patch series?

Works fine except one analog controller, but I have the only rev2
board with them and don't mind about that. All other boards with
analog controllers are rev3 and need these patches to work.

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2009-07-09 12:20 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-07 21:29 [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates Grazvydas Ignotas
2009-07-07 21:29 ` [U-Boot] [PATCH 1/4] OMAP3 pandora: pin mux cleanup Grazvydas Ignotas
2009-07-07 21:29   ` [U-Boot] [PATCH 2/4] OMAP3 pandora: setup pin mux for pins used on rev3 boards Grazvydas Ignotas
2009-07-07 21:30     ` [U-Boot] [PATCH 3/4] OMAP3 pandora: setup pulls for various GPIOs Grazvydas Ignotas
2009-07-07 21:30       ` [U-Boot] [PATCH 4/4] OMAP3 pandora: Fix CKE1 MUX setting to allow self-refresh Grazvydas Ignotas
2009-07-08 22:44 ` [U-Boot] [PATCH 0/4] OMAP3 pandora: pin mux updates Jean-Christophe PLAGNIOL-VILLARD
2009-07-09 12:20   ` Grazvydas Ignotas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox