[U-Boot] [PATCH 5/8] OMAP3 zoom1 Add usbtty configuration

[Tom Rix <Tom.Rix@windriver.com>]

The primary console of zoom1 is the serial out from the jumpers
accessed by removing the back panel.

A secondary console is to use the usbtty.  The user can set this
manually by doing

setenv stdout usbtty; setenv stdin usbtty; setenv stderr usbtty
saveenv

usbtty will be usable by accessing the /dev/ttyACM0 on a linux host.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
---
 include/configs/omap3_zoom1.h |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 61a41e7..c7a963c 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -99,6 +99,21 @@
 #define CONFIG_OMAP3_MMC		1
 #define CONFIG_DOS_PARTITION		1
 
+/* USB */
+#define CONFIG_MUSB_UDC			1
+#define CONFIG_USB_OMAP3		1
+#define CONFIG_TWL4030_USB		1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"Zoom1"
+
 /* commands to include */
 #include <config_cmd_default.h>
 
@@ -160,6 +175,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
+	"usbtty=cdc_acm\0" \
 	"console=ttyS2,115200n8\0" \
 	"videomode=1024x768 at 60,vxres=1024,vyres=768\0" \
 	"videospec=omapfb:vram:2M,vram:4M\0" \
-- 
1.6.0.4