From mboxrd@z Thu Jan  1 00:00:00 1970
From: Guy Yribarren <guy.yribarren@actis-computer.com>
Date: Mon, 22 Aug 2011 14:52:18 +0200
Subject: [U-Boot] mpc8315e: no link on pci-e interface
Message-ID: <12521325286675@neobolian.deckpoint.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello,

I am currently designing an mpc8315e board with u-boot based on the
mpc8315e-rdb board (u-boot v2011.06). One pci-e target is connected to pcie0
interface (mSATA SSD module), however during mpc83xx_pcie_init_bus call the
pcie0 link returns always a "no link" information.

It looks like the mpc8315e-rdb code didn't include the serdes configuration
has it's done on the mpc8308-rdb board, why such setting aren't present into
mpc8315e-rdb? 
Is the pci-e interface working on such board with the reset default
configuration on serdes section?

Is someone has successful experience about the pcie0 interface with the
mpc8315-erdb?

Thanks for your support,
Best regards

Guy Yribarren?