[U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.

[U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.

[Marcel Ziswiler]

---
 include/configs/r7780mp.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 7738a17..71c570e 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -154,7 +154,7 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 */
-/* AX88696L Support(NE2000 base chip) */
+/* AX88796L Support(NE2000 base chip) */
 #define CONFIG_DRIVER_NE2000
 #define CONFIG_DRIVER_AX88796L
 #define CONFIG_DRIVER_NE2000_BASE	0xA4100000
-- 
1.6.0.4

[U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.

[Marcel Ziswiler]

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
---
 include/configs/r7780mp.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 7738a17..71c570e 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -154,7 +154,7 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 */
-/* AX88696L Support(NE2000 base chip) */
+/* AX88796L Support(NE2000 base chip) */
 #define CONFIG_DRIVER_NE2000
 #define CONFIG_DRIVER_AX88796L
 #define CONFIG_DRIVER_NE2000_BASE	0xA4100000
-- 
1.6.0.4

[U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.

[Wolfgang Denk]

Dear Marcel Ziswiler,

In message <1252423492.5386.7.camel@com-21> you wrote:
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
> ---
>  include/configs/r7780mp.h |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)

Your patch numbering is really, really confusing. There is a patch
posted for the first time numbered as v2, another one as v3, and this
here is the second version of a patch which is still numbered v1.

I completely lost you here.

I don;t understand if these patches are supposed to be part of a
series, or if they are independet of each other, or what else these
random vN additions might mean.  Please eluciadate.

Also please note that new versions of a patch should contain a
comment (below the "---" line) that describes what has been changed
compared to the old version, i. e. here something like: "v2: added
missing SoB line" or so.


Given this confusion, I will ignore the whole batch of 7 patches you
just sent. Please work on the other review comments, and then decide
how you want to post them - as series or independent patches. Assume
version numbering restarts from zero, as I really ignore this current
patch series.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Whom the gods would destroy, they first teach BASIC.

[U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.

[Marcel Ziswiler]

On Tue, 2009-09-08 at 20:37 +0200, Wolfgang Denk wrote:
> Your patch numbering is really, really confusing. There is a patch
> posted for the first time numbered as v2, another one as v3, and this
> here is the second version of a patch which is still numbered v1.

Sorry if I confused you, that was not my intention at all, but I truly carefully numbered my patches. Every patch having a v > 1 was already posted here once before:
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/67275
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/67197
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/67197

> I completely lost you here.
> 
> I don;t understand if these patches are supposed to be part of a
> series, or if they are independet of each other, or what else these
> random vN additions might mean.  Please eluciadate.

If it would be a series, one would add something like [3/6] or such. So it is no series, just a few very simple patches.

> Also please note that new versions of a patch should contain a
> comment (below the "---" line) that describes what has been changed
> compared to the old version, i. e. here something like: "v2: added
> missing SoB line" or so.

OK, this one is new for me, sorry. Unfortunately the one I looked at did not include any such history neither:
http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/67181

> Given this confusion, I will ignore the whole batch of 7 patches you
> just sent. Please work on the other review comments, and then decide
> how you want to post them - as series or independent patches. Assume
> version numbering restarts from zero, as I really ignore this current
> patch series.

That's really sad.

Cheers

Marcel Ziswiler

[U-Boot] [PATCH][v1] r7780mp: fix typo in Ethernet chip model number comment.

[Wolfgang Denk]

Dear Marcel Ziswiler,

In message <1252442498.5386.67.camel@com-21> you wrote:
> On Tue, 2009-09-08 at 20:37 +0200, Wolfgang Denk wrote:
> > Your patch numbering is really, really confusing. There is a patch
> > posted for the first time numbered as v2, another one as v3, and this
> > here is the second version of a patch which is still numbered v1.
> 
> Sorry if I confused you, that was not my intention at all, but I truly carefully numbered my patches. Every patch having a v > 1 was already posted here once before:
> http://article.gmane.org/gmane.comp.boot-loaders.u-boot/67275
> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/67197
> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/67197

Could you please make sure not to break threading, then?

> > Given this confusion, I will ignore the whole batch of 7 patches you
> > just sent. Please work on the other review comments, and then decide
> > how you want to post them - as series or independent patches. Assume
> > version numbering restarts from zero, as I really ignore this current
> > patch series.
> 
> That's really sad.

Not really; I think most patches need minor changes anyway.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is dangerous to be right on a subject  on  which  the  established
authorities are wrong.                                    -- Voltaire