From: Sandeep Gopalpet <sandeep.kumar@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 2/2] NET: Base support for etsec2.0
Date: Thu, 29 Oct 2009 19:30:51 +0530 [thread overview]
Message-ID: <125682485176-git-send-email-sandeep.kumar@freescale.com> (raw)
1. Modified the tsec_mdio structure to include the new regs
2. Modified the MDIO_BASE_ADDR so that it will handle both
older version and new version of etsec.
Signed-off-by: Sandeep Gopalpet <sandeep.kumar@freescale.com>
---
include/asm-ppc/immap_83xx.h | 2 +-
include/asm-ppc/immap_85xx.h | 6 +++++-
include/asm-ppc/immap_86xx.h | 2 +-
include/configs/P1_P2_RDB.h | 5 +++++
include/tsec.h | 7 +++++++
5 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 6dd477c..2e6ba2d 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -872,7 +872,7 @@ typedef struct immap {
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
#define TSEC_SIZE 0x01000
-#define CONFIG_SYS_MDIO1_OFFSET 0x24520
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define TSEC_MDIO_OFFSET 0x01000
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 54b43b1..2f2ebfe 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1933,9 +1933,13 @@ typedef struct ccsr_gur {
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
/* TSEC and MDIO OFFSETS */
+#ifdef CONFIG_TSECV2
+#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
+#else
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
+#endif
-#define CONFIG_SYS_MDIO1_OFFSET 0x24520
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define TSEC_MDIO_OFFSET 0x01000
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
diff --git a/include/asm-ppc/immap_86xx.h b/include/asm-ppc/immap_86xx.h
index be2eadd..783ea2e 100644
--- a/include/asm-ppc/immap_86xx.h
+++ b/include/asm-ppc/immap_86xx.h
@@ -1300,7 +1300,7 @@ extern immap_t *immr;
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define CONFIG_SYS_MDIO1_OFFSET 0x24520
+#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define TSEC_MDIO_OFFSET 0x01000
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 310242e..4d93ed8 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -84,6 +84,11 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_MP
#endif
+/* TSECV2 */
+#if defined(CONFIG_P1020)
+#define CONFIG_TSECV2
+#endif
+
/*
* These can be toggled for performance analysis, otherwise use default.
*/
diff --git a/include/tsec.h b/include/tsec.h
index d895d02..fc2f075 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -456,12 +456,19 @@ typedef struct tsec_hash_regs
} tsec_hash_t;
typedef struct tsec_mdio {
+ uint res1[4];
+ uint ieventm;
+ uint imaskm;
+ uint res2;
+ uint emapm;
+ uint res3[320];
uint miimcfg; /* MII Management: Configuration */
uint miimcom; /* MII Management: Command */
uint miimadd; /* MII Management: Address */
uint miimcon; /* MII Management: Control */
uint miimstat; /* MII Management: Status */
uint miimind; /* MII Management: Indicators */
+ uint res4[690];
} tsec_mdio_t;
typedef struct tsec
--
1.5.2.2
next reply other threads:[~2009-10-29 14:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-29 14:00 Sandeep Gopalpet [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-10-28 8:49 [U-Boot] [PATCH v3 2/2] NET: Base support for etsec2.0 Sandeep Gopalpet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=125682485176-git-send-email-sandeep.kumar@freescale.com \
--to=sandeep.kumar@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox