From mboxrd@z Thu Jan  1 00:00:00 1970
From: myuboot at fastmail.fm <myuboot@fastmail.fm>
Date: Wed, 04 Nov 2009 09:35:26 -0600
Subject: [U-Boot] multiple partitions in mtdparts
In-Reply-To: <200911040814.33133.dk-arm-linux@gmx.de>
References: <1257292804-10612-1-git-send-email-Tom.Rix@windriver.com>
	<1257292804-10612-3-git-send-email-Tom.Rix@windriver.com>
	<1257294893.2375.1343441741@webmail.messagingengine.com>
	<200911040814.33133.dk-arm-linux@gmx.de>
Message-ID: <1257348926.15792.1343548151@webmail.messagingengine.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

I thought that is a legal definition according to u-boot document
section "5.9.3.5. mtdparts - define a Linux compatible MTD partition
scheme" at http://www.denx.de/wiki/view/DULG/UBootCmdGroupFlash

mtdparts=mtdparts=<mtd-def>[;<mtd-def>...]

Thanks.

On Wed, 04 Nov 2009 08:14 +0100, "Dieter Kiermaier"
<dk-arm-linux@gmx.de> wrote:
> Am Mittwoch 04 November 2009 01:34:53 schrieb myuboot at fastmail.fm:
> > Hi, 
> > 
> > I am trying to define multiple partitions using mtdparts variable. But I
> > can't get it set automatically right.
> > 
> > I defined the set_bootargs as the following:
> > set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2
> > mtdparts=ph
> > ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl
> > ash.1:16384k(data) console=ttyS0,115200n8
> > 
> > But when I run set_bootargs, I got the following error - 
> > # run set_bootargs
> > Unknown command 'physmap-flash.1:16384k(data)' - try 'help'
> > Can someone help me with the correct format on mtdparts? thanks a lot.
> > 
> 
> I don't know the exact format but it looks like the ";" between
> (root2);physmap-flash1 causes your error?
> 
> Dieter
> 
> > 
> > ====================================================
> > mtdparts=mtdparts=physmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),793
> > 6k(root2);physmap-flash.1:16384k(data)
> > boot=run set_bootargs;chpart nor0,${boot_device};fsload
> > boot/uImage;bootm
> > mtdids=nor0=physmap-flash.0,nor1=physmap-flash.1
> > partition=nor0,2
> > mtddevnum=2
> > mtddevname=root1
> > set_bootargs=setenv bootargs root=/dev/mtdblock2 rootfs=cramfs,jffs2
> > mtdparts=ph
> > ysmap-flash.0:256k(u-boot),256k(u-boot-env),7936k(root1),7936k(root2);physmap-fl
> > ash.1:16384k(data) console=ttyS0,115200n8
> > bootargs=root=/dev/mtdblock2 rootfs=cramfs,jffs2
> > mtdparts=physmap-flash.0:256k(u
> > -boot),256k(u-boot-env),7936k(root1),7936k(root2)
> > 
> > Environment size: 847/262140 bytes
> > # run set_bootargs
> > Unknown command 'physmap-flash.1:16384k(data)' - try 'help'
> > #
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
> > 
> 
>