From: Vipin KUMAR <vipin.kumar@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs
Date: Thu, 7 Jan 2010 17:26:21 +0530 [thread overview]
Message-ID: <1262865390-2016-1-git-send-email-vipin.kumar@st.com> (raw)
This patch set is a reworked patch which incorporates all review feedbacks from
earlier earlier mails
This patch set contains the support for 4 SoCs
SPEAr600
SPEAr300
SPEAr310
SPEAr320
SPEAr is an ARM based SoC which supports rich set of peripherals like Ethernet,
USB Host, USB Device etc to support various general applications
For further info on SPEAr SoC, please see README.spear also contained in the
patch set.
Vipin (9):
Added README.spear
SPEAr600 SoC support added
SPEAr300 SoC support added
SPEAr310 SoC support added
SPEAr320 SoC support added
i2c driver support for SPEAr SoCs
smi driver support for SPEAr SoCs
nand(fsmc) driver support for SPEAr SoCs
usbd driver support for SPEAr SoCs
MAKEALL | 4 +
Makefile | 6 +
board/spear/common/spr_lowlevel_init.S | 201 +++++
board/spear/common/spr_misc.c | 296 +++++++
board/spear/spear300/Makefile | 52 ++
board/spear/spear300/config.mk | 38 +
board/spear/spear300/spear300.c | 57 ++
board/spear/spear310/Makefile | 52 ++
board/spear/spear310/config.mk | 41 +
board/spear/spear310/spear310.c | 58 ++
board/spear/spear320/Makefile | 52 ++
board/spear/spear320/config.mk | 41 +
board/spear/spear320/spear320.c | 58 ++
board/spear/spear600/Makefile | 52 ++
board/spear/spear600/config.mk | 38 +
board/spear/spear600/spear600.c | 53 ++
cpu/arm926ejs/spear/Makefile | 52 ++
cpu/arm926ejs/spear/reset.c | 53 ++
cpu/arm926ejs/spear/timer.c | 150 ++++
doc/README.spear | 53 ++
drivers/i2c/Makefile | 1 +
drivers/i2c/spr_i2c.c | 340 ++++++++
drivers/mtd/Makefile | 1 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/spr_nand.c | 123 +++
drivers/mtd/spr_smi.c | 530 +++++++++++++
drivers/serial/usbtty.h | 2 +
drivers/usb/gadget/Makefile | 1 +
drivers/usb/gadget/spr_udc.c | 1004 ++++++++++++++++++++++++
include/asm-arm/arch-spear/spr_defs.h | 38 +
include/asm-arm/arch-spear/spr_emi.h | 54 ++
include/asm-arm/arch-spear/spr_gpt.h | 83 ++
include/asm-arm/arch-spear/spr_i2c.h | 146 ++++
include/asm-arm/arch-spear/spr_misc.h | 130 +++
include/asm-arm/arch-spear/spr_nand.h | 57 ++
include/asm-arm/arch-spear/spr_smi.h | 117 +++
include/asm-arm/arch-spear/spr_syscntl.h | 38 +
include/asm-arm/arch-spear/spr_xloader_table.h | 67 ++
include/configs/spear.h | 376 +++++++++
include/usb/spr_udc.h | 227 ++++++
40 files changed, 4743 insertions(+), 0 deletions(-)
create mode 100755 board/spear/common/spr_lowlevel_init.S
create mode 100755 board/spear/common/spr_misc.c
create mode 100755 board/spear/spear300/Makefile
create mode 100755 board/spear/spear300/config.mk
create mode 100755 board/spear/spear300/spear300.c
create mode 100755 board/spear/spear310/Makefile
create mode 100755 board/spear/spear310/config.mk
create mode 100755 board/spear/spear310/spear310.c
create mode 100755 board/spear/spear320/Makefile
create mode 100755 board/spear/spear320/config.mk
create mode 100755 board/spear/spear320/spear320.c
create mode 100755 board/spear/spear600/Makefile
create mode 100755 board/spear/spear600/config.mk
create mode 100755 board/spear/spear600/spear600.c
create mode 100755 cpu/arm926ejs/spear/Makefile
create mode 100755 cpu/arm926ejs/spear/reset.c
create mode 100755 cpu/arm926ejs/spear/timer.c
create mode 100644 doc/README.spear
mode change 100644 => 100755 drivers/i2c/Makefile
create mode 100755 drivers/i2c/spr_i2c.c
mode change 100644 => 100755 drivers/mtd/Makefile
create mode 100755 drivers/mtd/nand/spr_nand.c
create mode 100755 drivers/mtd/spr_smi.c
mode change 100644 => 100755 drivers/serial/usbtty.h
mode change 100644 => 100755 drivers/usb/gadget/Makefile
create mode 100755 drivers/usb/gadget/spr_udc.c
create mode 100644 include/asm-arm/arch-spear/spr_defs.h
create mode 100755 include/asm-arm/arch-spear/spr_emi.h
create mode 100755 include/asm-arm/arch-spear/spr_gpt.h
create mode 100755 include/asm-arm/arch-spear/spr_i2c.h
create mode 100644 include/asm-arm/arch-spear/spr_misc.h
create mode 100644 include/asm-arm/arch-spear/spr_nand.h
create mode 100755 include/asm-arm/arch-spear/spr_smi.h
create mode 100644 include/asm-arm/arch-spear/spr_syscntl.h
create mode 100755 include/asm-arm/arch-spear/spr_xloader_table.h
create mode 100755 include/configs/spear.h
create mode 100755 include/usb/spr_udc.h
next reply other threads:[~2010-01-07 11:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-07 11:56 Vipin KUMAR [this message]
2010-01-07 11:56 ` [U-Boot] [PATCH v2 1/9] Added README.spear Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 2/9] SPEAr600 SoC support added Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 3/9] SPEAr300 " Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 4/9] SPEAr310 " Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 5/9] SPEAr320 " Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 6/9] i2c driver support for SPEAr SoCs Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 7/9] smi " Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 8/9] nand(fsmc) " Vipin KUMAR
2010-01-07 11:56 ` [U-Boot] [PATCH v2 9/9] usbd " Vipin KUMAR
2010-01-09 9:50 ` Remy Bohmer
2010-01-07 16:42 ` [U-Boot] [PATCH v2 0/9] Added " Tom
2010-01-07 18:03 ` Armando VISCONTI
2010-01-08 13:28 ` Vipin KUMAR
2010-01-07 18:21 ` Peter Tyser
2010-01-08 4:35 ` Vipin KUMAR
2010-01-08 15:55 ` Peter Tyser
2010-01-08 16:43 ` Tom
2010-01-11 17:13 ` Vipin Kumar
2010-01-12 13:38 ` Tom
2010-01-08 13:31 ` Vipin KUMAR
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1262865390-2016-1-git-send-email-vipin.kumar@st.com \
--to=vipin.kumar@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox