From: John Rigby <jcrigby@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH-V2 0/9] Add support for i.MX25 SOC and TX25 board
Date: Sat, 16 Jan 2010 21:50:18 -0700 [thread overview]
Message-ID: <1263703827-2727-1-git-send-email-jcrigby@gmail.com> (raw)
Changes since first series:
0001-mxc_serial-replace-platform-specific-clock.patch
0002-arm926ejs-add-nand_spl-boot-support.patch
no changes
0003-Add-MX25-support-to-nand_spl-fsl-nfc-driver.patch
changed commit message from Add-V1.1.. to Add-MX25...
included Scott's suggested changes
naming remains the same as before pending comments from
someone in Freescale's i.mx group
0004-Nand-mxc_nand-add-v1.1-controller-support.patch
no changes, again final version naming pending
0005-fec_mxc-cleanup-and-factor-out-imx27-dependencies.patch
no changes
0006-Add-support-for-Freescale-MX25-SOC.patch
no changes
0007-fec_mxc-add-imx25-support.patch
no changes
0008-env_nand.c-print-error-message-and-fail-gracefully.patch
included Scott's suggested change
0009-Add-support-for-KARO-TX25-board.patch
included changes from Wolfgang and Fabio
Rest is the same as original series:
The i.MX25 has the same ARM core and shares some ip blocks
with i.MX27 but also borrows from i.MX31.
The TX25 is an i.MX25 based board. It has only NAND flash
so this port includes nand_spl and mtd/nand changes for
the nand controller in the i.MX25.
Booting from nand also required adding nand_spl boot support
for arm926ejs.
Support is also included for serial and ethernet.
This port was made possible by a donation of hardware by
DENX Computer Systems GmbH www.denx-cs.de.
John Rigby (8):
mxc_serial replace platform specific clock
arm926ejs: add nand_spl boot support
Add MX25 support to nand_spl fsl nfc driver
Nand mxc_nand add v1.1 controller support
fec_mxc: cleanup and factor out MX27 dependencies
Add support for Freescale MX25 SOC
fec_mxc: add MX25 support
Add support for KARO TX25 board
Wolfgang Denk (1):
env_nand.c: print error message and fail gracefully
MAINTAINERS | 4 +
Makefile | 4 +
board/karo/tx25/Makefile | 51 +++
board/karo/tx25/config.mk | 5 +
board/karo/tx25/lowlevel_init.S | 131 +++++++
board/karo/tx25/tx25.c | 176 +++++++++
common/env_nand.c | 7 +
cpu/arm926ejs/mx25/Makefile | 46 +++
cpu/arm926ejs/mx25/generic.c | 263 +++++++++++++
cpu/arm926ejs/mx25/reset.c | 56 +++
cpu/arm926ejs/mx25/timer.c | 187 +++++++++
cpu/arm926ejs/mx27/generic.c | 5 +
cpu/arm926ejs/start.S | 42 ++-
drivers/mtd/nand/mxc_nand.c | 604 ++++++++++++++++++++++++++----
drivers/net/fec_mxc.c | 57 ++-
drivers/net/fec_mxc.h | 32 ++-
drivers/serial/serial_mxc.c | 16 +-
include/asm-arm/arch-mx25/clock.h | 36 ++
include/asm-arm/arch-mx25/imx-regs.h | 330 ++++++++++++++++
include/asm-arm/arch-mx25/imx25-pinmux.h | 421 +++++++++++++++++++++
include/asm-arm/arch-mx27/clock.h | 3 +
include/asm-arm/arch-mx27/imx-regs.h | 13 +
include/asm-arm/arch-mx31/mx31.h | 1 +
include/configs/imx27lite.h | 1 +
include/configs/mx31pdk.h | 4 +
include/configs/tx25.h | 178 +++++++++
include/fsl_nfc.h | 78 ++++-
nand_spl/board/karo/tx25/Makefile | 78 ++++
nand_spl/board/karo/tx25/config.mk | 1 +
nand_spl/board/karo/tx25/u-boot.lds | 58 +++
nand_spl/nand_boot_fsl_nfc.c | 72 +++-
31 files changed, 2833 insertions(+), 127 deletions(-)
create mode 100644 board/karo/tx25/Makefile
create mode 100644 board/karo/tx25/config.mk
create mode 100644 board/karo/tx25/lowlevel_init.S
create mode 100644 board/karo/tx25/tx25.c
create mode 100644 cpu/arm926ejs/mx25/Makefile
create mode 100644 cpu/arm926ejs/mx25/generic.c
create mode 100644 cpu/arm926ejs/mx25/reset.c
create mode 100644 cpu/arm926ejs/mx25/timer.c
create mode 100644 include/asm-arm/arch-mx25/clock.h
create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
create mode 100644 include/configs/tx25.h
create mode 100644 nand_spl/board/karo/tx25/Makefile
create mode 100644 nand_spl/board/karo/tx25/config.mk
create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
next reply other threads:[~2010-01-17 4:50 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-17 4:50 John Rigby [this message]
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 1/9] mxc_serial replace platform specific clock John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 2/9] arm926ejs: add nand_spl boot support John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 3/9] Add MX25 support to nand_spl fsl nfc driver John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 5/9] fec_mxc: cleanup and factor out MX27 dependencies John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 6/9] Add support for Freescale MX25 SOC John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 7/9] fec_mxc: add MX25 support John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 8/9] env_nand.c: print error message and fail gracefully John Rigby
2010-01-17 4:50 ` [U-Boot] [PATCH-V2 9/9] Add support for KARO TX25 board John Rigby
2010-01-25 23:48 ` [U-Boot] [PATCH-V2 8/9] env_nand.c: print error message and fail gracefully Scott Wood
2010-01-18 21:02 ` [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support Scott Wood
2010-01-18 21:23 ` Magnus Lilja
2010-01-19 4:11 ` John Rigby
2010-01-19 16:03 ` Scott Wood
2010-01-19 21:02 ` Magnus Lilja
2010-01-19 21:51 ` John Rigby
2010-01-20 19:51 ` Magnus Lilja
2010-01-20 21:25 ` John Rigby
2010-01-17 17:54 ` [U-Boot] [PATCH-V2 0/9] Add support for i.MX25 SOC and TX25 board Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263703827-2727-1-git-send-email-jcrigby@gmail.com \
--to=jcrigby@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox