From: John Rigby <jcrigby@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH-V3 0/8] Add support for i.MX25 SOC and KARO TX25 board
Date: Mon, 25 Jan 2010 23:12:50 -0700 [thread overview]
Message-ID: <1264486378-10316-1-git-send-email-jcrigby@gmail.com> (raw)
This series has been updated to merge cleanly on top
of Scotts nand tree which had earlier mxc nand conflicts
The whole series is included for completeness even though
most patches have not changed.
Changes since v2:
0001-mxc_serial-replace-platform-specific-clock.patch
unchanged
0002-arm926ejs-add-nand_spl-boot-support.patch
unchanged
0003-Add-MX25-support-to-nand_spl-fsl-nfc-driver.patch
unchanged
0004-Nand-mxc_nand-add-v1.1-controller-support.patch
updated to apply cleanly to current nand tree
0005-fec_mxc-cleanup-and-factor-out-imx27-dependencies.patch
unchanged
0006-Add-support-for-Freescale-MX25-SOC.patch
unchanged
0007-fec_mxc-add-imx25-support.patch
small changes associated with the nand changes
0008-Add-support-for-KARO-TX25-board.patch
small changes associated with the nand changes
(this was 0009 in previous series, the previous 0008
has already been merged)
John Rigby (8):
mxc_serial replace platform specific clock
arm926ejs: add nand_spl boot support
Add MX25 support to nand_spl fsl nfc driver
Nand mxc_nand add v1.1 controller support
fec_mxc: cleanup and factor out MX27 dependencies
Add support for Freescale MX25 SOC
fec_mxc: add MX25 support
Add support for KARO TX25 board
MAINTAINERS | 4 +
Makefile | 4 +
board/karo/tx25/Makefile | 51 +++
board/karo/tx25/config.mk | 5 +
board/karo/tx25/lowlevel_init.S | 131 +++++++
board/karo/tx25/tx25.c | 176 +++++++++
cpu/arm926ejs/mx25/Makefile | 46 +++
cpu/arm926ejs/mx25/generic.c | 263 +++++++++++++
cpu/arm926ejs/mx25/reset.c | 56 +++
cpu/arm926ejs/mx25/timer.c | 187 +++++++++
cpu/arm926ejs/mx27/generic.c | 5 +
cpu/arm926ejs/start.S | 42 ++-
drivers/mtd/nand/mxc_nand.c | 617 ++++++++++++++++++++++++++----
drivers/net/fec_mxc.c | 57 ++-
drivers/net/fec_mxc.h | 32 ++-
drivers/serial/serial_mxc.c | 16 +-
include/asm-arm/arch-mx25/clock.h | 36 ++
include/asm-arm/arch-mx25/imx-regs.h | 316 +++++++++++++++
include/asm-arm/arch-mx25/imx25-pinmux.h | 421 ++++++++++++++++++++
include/asm-arm/arch-mx27/clock.h | 3 +
include/asm-arm/arch-mx31/mx31.h | 1 +
include/configs/mx31pdk.h | 4 +
include/configs/tx25.h | 179 +++++++++
include/fsl_nfc.h | 78 ++++-
nand_spl/board/karo/tx25/Makefile | 78 ++++
nand_spl/board/karo/tx25/config.mk | 1 +
nand_spl/board/karo/tx25/u-boot.lds | 58 +++
nand_spl/nand_boot_fsl_nfc.c | 72 +++-
28 files changed, 2812 insertions(+), 127 deletions(-)
create mode 100644 board/karo/tx25/Makefile
create mode 100644 board/karo/tx25/config.mk
create mode 100644 board/karo/tx25/lowlevel_init.S
create mode 100644 board/karo/tx25/tx25.c
create mode 100644 cpu/arm926ejs/mx25/Makefile
create mode 100644 cpu/arm926ejs/mx25/generic.c
create mode 100644 cpu/arm926ejs/mx25/reset.c
create mode 100644 cpu/arm926ejs/mx25/timer.c
create mode 100644 include/asm-arm/arch-mx25/clock.h
create mode 100644 include/asm-arm/arch-mx25/imx-regs.h
create mode 100644 include/asm-arm/arch-mx25/imx25-pinmux.h
create mode 100644 include/configs/tx25.h
create mode 100644 nand_spl/board/karo/tx25/Makefile
create mode 100644 nand_spl/board/karo/tx25/config.mk
create mode 100644 nand_spl/board/karo/tx25/u-boot.lds
next reply other threads:[~2010-01-26 6:12 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-26 6:12 John Rigby [this message]
2010-01-26 6:12 ` [U-Boot] [PATCH V3 1/8] mxc_serial replace platform specific clock John Rigby
2010-01-26 6:12 ` [U-Boot] [PATCH V3 2/8] arm926ejs: add nand_spl boot support John Rigby
2010-01-26 6:12 ` [U-Boot] [PATCH V3 3/8] Add MX25 support to nand_spl fsl nfc driver John Rigby
2010-01-26 6:12 ` [U-Boot] [PATCH V3 4/8] Nand mxc_nand add v1.1 controller support John Rigby
2010-01-26 6:12 ` [U-Boot] [PATCH V3 5/8] fec_mxc: cleanup and factor out MX27 dependencies John Rigby
2010-01-26 6:12 ` [U-Boot] [PATCH V3 6/8] Add support for Freescale MX25 SOC John Rigby
2010-01-26 6:12 ` [U-Boot] [PATCH V3 7/8] fec_mxc: add MX25 support John Rigby
2010-01-26 6:12 ` [U-Boot] [PATCH V3 8/8] Add support for KARO TX25 board John Rigby
2010-01-27 9:03 ` [U-Boot] [PATCH V3 7/8] fec_mxc: add MX25 support Lv Terry-R65388
2010-01-27 15:50 ` John Rigby
2010-02-01 6:18 ` Ben Warren
2010-03-02 8:05 ` Lv Terry-R65388
2010-03-02 16:04 ` John Rigby
2010-02-01 6:15 ` [U-Boot] [PATCH V3 5/8] fec_mxc: cleanup and factor out MX27 dependencies Ben Warren
2010-01-26 20:02 ` [U-Boot] [PATCH V3 4/8] Nand mxc_nand add v1.1 controller support Scott Wood
2010-01-26 20:05 ` [U-Boot] [PATCH V3 3/8] Add MX25 support to nand_spl fsl nfc driver Scott Wood
2010-01-26 21:51 ` John Rigby
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1264486378-10316-1-git-send-email-jcrigby@gmail.com \
--to=jcrigby@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox