[U-Boot] [PATCH 3/3] fsl_esdhc: Only modify the field we are changing in WML

[Kumar Gala <galak@kernel.crashing.org>]

From: Roy Zang <tie-fei.zang@freescale.com>

When we set the read or write watermark in WML we should maintain the
rest of the register as is, rather than using some hard coded value.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
* This patch supercededs (fsl_esdhc: Only modify WML[WR] field)

 drivers/mmc/fsl_esdhc.c |    8 +++-----
 include/fsl_esdhc.h     |    2 ++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 999b581..c7b7e84 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -110,8 +110,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 		if (wml_value > 0x10)
 			wml_value = 0x10;
 
-		wml_value = 0x100000 | wml_value;
-
+		esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 		esdhc_write32(&regs->dsaddr, (u32)data->dest);
 	} else {
 		if (wml_value > 0x80)
@@ -120,12 +119,11 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 			printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
 			return TIMEOUT;
 		}
-		wml_value = wml_value << 16 | 0x10;
+
+		esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK, wml_value << 16);
 		esdhc_write32(&regs->dsaddr, (u32)data->src);
 	}
 
-	esdhc_write32(&regs->wml, wml_value);
-
 	esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);
 
 	/* Calculate the timeout period for data transactions */
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 5f02018..f9ae15a 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -133,6 +133,8 @@
 
 #define WML		0x2e044
 #define WML_WRITE	0x00010000
+#define WML_RD_WML_MASK	0xff
+#define WML_WR_WML_MASK	0xff0000
 
 #define BLKATTR		0x2e004
 #define BLKATTR_CNT(x)	((x & 0xffff) << 16)
-- 
1.6.0.6