From: Becky Bruce <beckyb@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 0/10] PPC LBC/TLB cleanups; reginfo command for 85xx
Date: Wed, 2 Jun 2010 13:11:59 -0500 [thread overview]
Message-ID: <1275502329-23457-1-git-send-email-beckyb@kernel.crashing.org> (raw)
This somewhat random patch series got its start when I was asked to
create a reginfo command for 85xx by one of the internal teams here at
FSL to dump the BR/ORs, LAWs, and the TLBCAM entries. As I started doing
that, I began to notice that there was a lot of duplicated and inconsistent
code for manipulating the TLBs and LBC registers, which, in some cases,
would have caused me to have to write extra code to make reginfo useful
on multiple platforms. So I decided to clean this up. The bulk of
these patches are just merges of duplicated code and renames of things
to get to a consistent naming scheme.
These really need to be picked up by a single maintainer, as there's
a definite dependency chain here; I'll let Kumar and Wolfgang decide
who wants it.
Wolfgang, my makefile changes are going to conflict with your
top-level makefile changes that are posted on the list but not yet
in the tree - you should be able to just incorporate my changes, or
you can poke me when yours are in the tree and I can deal with it.
NOTE: Updated from the original version to incorporate feedback - removed
unnecessary volatiles in the upmconfig code, made the definition
of FSL_LBC dependent on 85xx/86xx/83xx, and moved the ohci readl/writel
defs into a header.
Diffstat below.
Cheers,
Becky
MAKEALL | 2 +
Makefile | 1 +
arch/powerpc/cpu/mpc83xx/cpu.c | 66 ------------
arch/powerpc/cpu/mpc83xx/cpu_init.c | 53 ++--------
arch/powerpc/cpu/mpc83xx/nand_init.c | 4 +-
arch/powerpc/cpu/mpc83xx/speed.c | 2 +-
arch/powerpc/cpu/mpc85xx/cpu.c | 78 +++-----------
arch/powerpc/cpu/mpc85xx/cpu_init.c | 58 +----------
arch/powerpc/cpu/mpc85xx/cpu_init_nand.c | 6 +-
arch/powerpc/cpu/mpc85xx/speed.c | 5 +-
arch/powerpc/cpu/mpc85xx/tlb.c | 70 ++++++++-----
arch/powerpc/cpu/mpc86xx/cpu.c | 15 +---
arch/powerpc/cpu/mpc86xx/cpu_init.c | 55 +----------
arch/powerpc/cpu/mpc86xx/speed.c | 5 +-
arch/powerpc/cpu/mpc8xxx/Makefile | 3 +
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c | 135 ++++++++++++++++++++++++
arch/powerpc/include/asm/config.h | 6 +
arch/powerpc/include/asm/fsl_law.h | 1 +
arch/powerpc/include/asm/fsl_lbc.h | 112 ++++++++++++--------
arch/powerpc/include/asm/immap_83xx.h | 13 ++-
arch/powerpc/include/asm/immap_85xx.h | 46 +--------
arch/powerpc/include/asm/immap_86xx.h | 49 +--------
arch/powerpc/include/asm/mmu.h | 2 +
board/atum8548/atum8548.c | 2 +-
board/esd/vme8349/vme8349.c | 2 +-
board/freescale/mpc8313erdb/sdram.c | 2 +-
board/freescale/mpc8349emds/mpc8349emds.c | 2 +-
board/freescale/mpc8349itx/mpc8349itx.c | 7 +-
board/freescale/mpc8360emds/mpc8360emds.c | 6 +-
board/freescale/mpc8360erdk/nand.c | 6 +-
board/freescale/mpc8540ads/mpc8540ads.c | 8 +-
board/freescale/mpc8541cds/mpc8541cds.c | 13 +--
board/freescale/mpc8544ds/mpc8544ds.c | 2 +-
board/freescale/mpc8548cds/mpc8548cds.c | 13 +--
board/freescale/mpc8555cds/mpc8555cds.c | 12 +--
board/freescale/mpc8560ads/mpc8560ads.c | 8 +-
board/freescale/mpc8568mds/mpc8568mds.c | 11 +--
board/freescale/mpc8569mds/mpc8569mds.c | 2 +-
board/mpc8540eval/mpc8540eval.c | 6 +-
board/pm854/pm854.c | 2 +-
board/pm856/pm856.c | 2 +-
board/sbc8349/sbc8349.c | 2 +-
board/sbc8548/sbc8548.c | 20 +---
board/sbc8560/sbc8560.c | 6 +-
board/sheldon/simpc8313/sdram.c | 2 +-
board/sheldon/simpc8313/simpc8313.c | 2 +-
board/socrates/socrates.c | 31 +++---
board/tqc/tqm834x/tqm834x.c | 8 +-
board/tqc/tqm85xx/nand.c | 12 +-
board/tqc/tqm85xx/tqm85xx.c | 35 +++---
board/xes/xpedite5170/xpedite5170.c | 10 +-
board/xes/xpedite5200/xpedite5200.c | 11 +-
board/xes/xpedite5370/xpedite5370.c | 9 +-
common/cmd_reginfo.c | 5 +
drivers/misc/fsl_law.c | 131 ++++++++++--------------
drivers/mtd/nand/fsl_elbc_nand.c | 18 ++--
drivers/usb/host/ohci-hcd.c | 11 --
drivers/usb/host/ohci.h | 13 +++
include/configs/MPC8313ERDB.h | 1 +
include/configs/MPC8315ERDB.h | 1 +
include/configs/MPC837XEMDS.h | 1 +
include/configs/MPC8536DS.h | 1 +
include/configs/MPC8540EVAL.h | 1 +
include/configs/MPC8541CDS.h | 1 +
include/configs/MPC8544DS.h | 1 +
include/configs/MPC8548CDS.h | 1 +
include/configs/MPC8555CDS.h | 1 +
include/configs/MPC8560ADS.h | 1 +
include/configs/MPC8568MDS.h | 1 +
include/configs/MPC8569MDS.h | 1 +
include/configs/MPC8572DS.h | 1 +
include/configs/P1_P2_RDB.h | 1 +
include/configs/P2020DS.h | 1 +
include/configs/PM854.h | 1 +
include/configs/PM856.h | 1 +
include/configs/SBC8540.h | 1 +
include/configs/SIMPC8313.h | 1 +
include/configs/TQM85xx.h | 1 +
include/configs/XPEDITE5200.h | 1 +
include/configs/XPEDITE5370.h | 2 +
include/configs/sbc8548.h | 1 +
include/configs/sbc8560.h | 1 +
include/configs/socrates.h | 1 +
include/configs/stxgp3.h | 1 +
include/configs/stxssa.h | 1 +
include/mpc85xx.h | 2 -
nand_spl/board/freescale/mpc8536ds/nand_boot.c | 5 +-
nand_spl/nand_boot_fsl_elbc.c | 4 +-
next reply other threads:[~2010-06-02 18:11 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-02 18:11 Becky Bruce [this message]
2010-06-02 18:12 ` [U-Boot] [PATCH V2 01/10] powerpc: Update configs to properly set FSL_ELBC Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 02/10] drivers/usb/host/ohci-hcd: undef readl/writel before redefining Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 03/10] 83xx/85xx/86xx: LBC register cleanup Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 04/10] mpc85xx: tlb.c cleanups Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 05/10] mpc85xx: Add print_tlbcam() function Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 06/10] drivers/misc/fsl_law.c: Rearrange code to avoid duplication Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 07/10] fsl_law.c: Add print_laws() for FSL_CORENET platforms Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 08/10] mpc85xx: Add reginfo command Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 09/10] powerpc 83xx/85xx: Merge lbc upmconfig code Becky Bruce
2010-06-02 18:12 ` [U-Boot] [PATCH V2 10/10] MAKEALL: Add missing powerpc 36-bit targets Becky Bruce
2010-06-02 19:21 ` Scott Wood
2010-06-02 19:25 ` Becky Bruce
2010-06-02 20:08 ` Wolfgang Denk
2010-06-02 19:16 ` [U-Boot] [PATCH V2 03/10] 83xx/85xx/86xx: LBC register cleanup Scott Wood
2010-06-02 19:32 ` Becky Bruce
2010-06-02 20:55 ` [U-Boot] [PATCH V3 " Becky Bruce
2010-06-02 20:57 ` Becky Bruce
2010-06-04 0:37 ` [U-Boot] [PATCH V2 " Kim Phillips
2010-06-04 20:22 ` Scott Wood
2010-06-08 16:15 ` Becky Bruce
2010-06-08 17:09 ` Kim Phillips
2010-06-08 17:28 ` Becky Bruce
2010-06-08 18:43 ` Kim Phillips
2010-06-08 18:49 ` Becky Bruce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275502329-23457-1-git-send-email-beckyb@kernel.crashing.org \
--to=beckyb@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox