[U-Boot] [PATCH 2/6] Convert Suen3 board to use array of phy addrs

[Tor Krill <tor@excito.com>]

Signed-off-by: Tor Krill <tor@excito.com>
---
 board/keymile/km_arm/km_arm.c |    3 ++-
 include/configs/km_arm.h      |    2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 53cf474..16da353 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -244,12 +244,13 @@ int dram_init(void)
 void reset_phy(void)
 {
 	char *name = "egiga0";
+	u8 port_addr[] = CONFIG_PHY_ADDRS;
 
 	if (miiphy_set_current_dev(name))
 		return;
 
 	/* reset the phy */
-	miiphy_reset(name, CONFIG_PHY_BASE_ADR);
+	miiphy_reset(name, port_addr[0]);
 }
 
 #if defined(CONFIG_HUSH_INIT_VAR)
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index a928c2c..1c3fa0d 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -130,7 +130,7 @@
 #define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
+#define CONFIG_PHY_ADDRS	{0,1}
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init 88E1118 PHY */
 
-- 
1.7.0.4