From: Rajeesh.R <rajeesh_r@cms.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] u-boot-2010.06-rc3 Error for ARM dk ..
Date: Fri, 25 Jun 2010 14:46:25 +0530 [thread overview]
Message-ID: <1277457385.2723.3.camel@localhost.localdomain> (raw)
Hi,
I have downladed uboot version u-boot-2010.06-rc3 and cross compiled
for arm
then I am getting error like below...
make[1]: Leaving directory
`/home/rajeesh/Development/Uboot/u-boot-2010.06-rc3/arch/arm/cpu/arm920t'
arm-linux-gcc -E -g -Os -fno-common -ffixed-r8 -msoft-float
-malignment-traps -D__KERNEL__ -DTEXT_BASE=0x21f00000
-I/home/rajeesh/Development/Uboot/u-boot-2010.06-rc3/include
-fno-builtin -ffreestanding -nostdinc
-isystem /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/include -pipe -DCONFIG_ARM -D__ARM__ -marm -mapcs-32 -mno-thumb-interwork -march=armv4 -include /home/rajeesh/Development/Uboot/u-boot-2010.06-rc3/include/u-boot/u-boot.lds.h -DLD_MAJOR=2 -DLD_MINOR=16 -ansi -D__ASSEMBLY__ -P - </home/rajeesh/Development/Uboot/u-boot-2010.06-rc3/arch/arm/cpu/arm920t/u-boot.lds >u-boot.lds
UNDEF_SYM=`arm-linux-objdump -x
board/atmel/at91rm9200dk/libat91rm9200dk.a lib/libgeneric.a
lib/lzma/liblzma.a lib/lzo/liblzo.a arch/arm/cpu/arm920t/libarm920t.a
arch/arm/cpu/arm920t/at91rm9200/libat91rm9200.a arch/arm/lib/libarm.a
fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a
fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
fs/yaffs2/libyaffs2.a fs/ubifs/libubifs.a net/libnet.a disk/libdisk.a
drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a
drivers/dma/libdma.a drivers/fpga/libfpga.a drivers/gpio/libgpio.a
drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a
drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a
drivers/mtd/nand/libnand.a drivers/mtd/onenand/libonenand.a
drivers/mtd/ubi/libubi.a drivers/mtd/spi/libspi_flash.a
drivers/net/libnet.a drivers/net/phy/libphy.a drivers/pci/libpci.a
drivers/pcmcia/libpcmcia.a drivers/power/libpower.a drivers/spi/libspi.a
drivers/rtc/librtc.a drivers/serial/libserial.a
drivers/twserial/libtws.a drivers/usb/gadget/libusb_gadget.a
drivers/usb/host/libusb_host.a drivers/usb/musb/libusb_musb.a
drivers/usb/phy/libusb_phy.a drivers/video/libvideo.a
drivers/watchdog/libwatchdog.a common/libcommon.a lib/libfdt/libfdt.a
api/libapi.a post/libpost.a | sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u
\1/p'|sort|uniq`; cd /home/rajeesh/Development/Uboot/u-boot-2010.06-rc3
&& arm-linux-ld -Bstatic -T u-boot.lds -Ttext 0x21f00000 $UNDEF_SYM
arch/arm/cpu/arm920t/start.o --start-group lib/libgeneric.a
lib/lzma/liblzma.a lib/lzo/liblzo.a arch/arm/cpu/arm920t/libarm920t.a
arch/arm/cpu/arm920t/at91rm9200/libat91rm9200.a arch/arm/lib/libarm.a
fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a
fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
fs/yaffs2/libyaffs2.a fs/ubifs/libubifs.a net/libnet.a disk/libdisk.a
drivers/bios_emulator/libatibiosemu.a drivers/block/libblock.a
drivers/dma/libdma.a drivers/fpga/libfpga.a drivers/gpio/libgpio.a
drivers/hwmon/libhwmon.a drivers/i2c/libi2c.a drivers/input/libinput.a
drivers/misc/libmisc.a drivers/mmc/libmmc.a drivers/mtd/libmtd.a
drivers/mtd/nand/libnand.a drivers/mtd/onenand/libonenand.a
drivers/mtd/ubi/libubi.a drivers/mtd/spi/libspi_flash.a
drivers/net/libnet.a drivers/net/phy/libphy.a drivers/pci/libpci.a
drivers/pcmcia/libpcmcia.a drivers/power/libpower.a drivers/spi/libspi.a
drivers/rtc/librtc.a drivers/serial/libserial.a
drivers/twserial/libtws.a drivers/usb/gadget/libusb_gadget.a
drivers/usb/host/libusb_host.a drivers/usb/musb/libusb_musb.a
drivers/usb/phy/libusb_phy.a drivers/video/libvideo.a
drivers/watchdog/libwatchdog.a common/libcommon.a lib/libfdt/libfdt.a
api/libapi.a post/libpost.a board/atmel/at91rm9200dk/libat91rm9200dk.a
--end-group
-L /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6 -lgcc
-Map u-boot.map -o u-boot
arm-linux-ld:
ERROR: /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_udivsi3.oS) uses hardware FP, whereas u-boot uses software FP
arm-linux-ld: failed to merge target specific data of
file /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_udivsi3.oS)
arm-linux-ld:
ERROR: /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_divsi3.oS) uses hardware FP, whereas u-boot uses software FP
arm-linux-ld: failed to merge target specific data of
file /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_divsi3.oS)
arm-linux-ld:
ERROR: /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_umodsi3.oS) uses hardware FP, whereas u-boot uses software FP
arm-linux-ld: failed to merge target specific data of
file /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_umodsi3.oS)
arm-linux-ld:
ERROR: /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_modsi3.oS) uses hardware FP, whereas u-boot uses software FP
arm-linux-ld: failed to merge target specific data of
file /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_modsi3.oS)
arm-linux-ld:
ERROR: /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_dvmd_lnx.oS) uses hardware FP, whereas u-boot uses software FP
arm-linux-ld: failed to merge target specific data of
file /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_dvmd_lnx.oS)
arm-linux-ld:
ERROR: /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_lshrdi3.oS) uses hardware FP, whereas u-boot uses software FP
arm-linux-ld: failed to merge target specific data of
file /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_lshrdi3.oS)
arm-linux-ld:
ERROR: /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_ashldi3.oS) uses hardware FP, whereas u-boot uses software FP
arm-linux-ld: failed to merge target specific data of
file /usr/local/arm/4.1/bin-ccache/../lib/gcc/arm-linux-uclibc/3.4.6/libgcc.a(_ashldi3.oS)
make: *** [u-boot] Error 1
[root at UcontestPC u-boot-2010.06-rc3]#
Thanks
Rajeesh.R.Nair
Dear "Rajeesh.R",
In message <1277360497.2839.14.camel@localhost.localdomain> you wrote:
>
> I am using at91rm9200 dk board .
> I have downloaded Uboot version 1.3.4 . and configured for
> at91rm9200dk board by using command
> make at91rm9200dk_config
> make
U-Boot 1.3.4 is two years old, i. e. hoplessly obsolete. Please use
current code instead (v2010.06-rc3).
> then I tried to download it stops after some time with error
> waiting for ACK,97,138,...Error!
> whether Rom boot is required for at91rm9200dk board...
You just need U-Boot, nothing else, but please use current code.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
grep me no patterns and I'll tell you no lines.
next reply other threads:[~2010-06-25 9:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-25 9:16 Rajeesh.R [this message]
2010-06-25 18:49 ` [U-Boot] u-boot-2010.06-rc3 Error for ARM dk Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1277457385.2723.3.camel@localhost.localdomain \
--to=rajeesh_r@cms.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox