[U-Boot] [PATCH] orion5x: edminiv2: add libata support

[Tor Krill <tor@excito.com>]

On Thu, 2010-07-01 at 10:41 +0200, Prafulla Wadaskar wrote:
> 
> > -----Original Message-----
> > From: u-boot-bounces at lists.denx.de 
> > [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Tor Krill
> > Sent: Thursday, July 01, 2010 1:07 PM
> > To: Albert Aribaud
> > Cc: u-boot at lists.denx.de
> > Subject: Re: [U-Boot] [PATCH] orion5x: edminiv2: add libata support
> > 
> > On Wed, 2010-06-30 at 23:30 +0200, Albert Aribaud wrote:
> > > Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
> > > ---
> > > This patch:
> > > - adds support in libata for the orion5x MVSATAHC controller;
> > > - enables orion5x MVSTAHC port 1 on the edmini board;
> > > - adds IDE and EXT2 commands to the edminiv2 command set.
> > 
> > Just a heads up. I posted a patch with a sata-driver for kirkwood a
> > while back. (We use this with our board and it seems to work fine)
> > 
> > http://lists.denx.de/pipermail/u-boot/2010-June/073147.html
> 
> I was just trying to test it, May I know relevant board configs?

On our board we have:

/*
 * Disk configuration
 */
#define CONFIG_SATA_MV
#define CONFIG_SYS_SATA_MAX_DEVICE      2

#ifdef CONFIG_SATA_MV
#define CONFIG_LBA48
#define CONFIG_LIBATA
#define CONFIG_CMD_SATA
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_EXT2
#endif


Hopefully i have not missed anything :)


> > 
> > Which might have some similarities to the sata controller on orion.
> 
> like egiga, we can think of having single sata driver for this.

My thoughts to.

/Tor