* [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES @ 2010-07-15 22:15 Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala 2010-07-26 18:13 ` [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES Kumar Gala 0 siblings, 2 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-15 22:15 UTC (permalink / raw) To: u-boot Add support for initializing the SERDES blocks on CoreNet style QoriQ devices and the p4080 specific SERDES tables to know which actual componetns are enabled. Additionally, split out the Frame Manger (FMAN) into its specific ethernet ports instead of gross level of the full FMAN. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/cpu/mpc85xx/Makefile | 2 + arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 212 +++++++++++++++++++++++++ arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 40 +++++ arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 94 +++++++++++ arch/powerpc/include/asm/fsl_serdes.h | 11 +- 5 files changed, 357 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h create mode 100644 arch/powerpc/cpu/mpc85xx/p4080_serdes.c diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 6ae113a..b7c0272 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -76,6 +76,8 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o +COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o +COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS = $(COBJS-y) COBJS += cpu.o diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c new file mode 100644 index 0000000..1c03061 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -0,0 +1,212 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <asm/processor.h> +#include "fsl_corenet_serdes.h" + +static u32 serdes_prtcl_map; + +#ifdef DEBUG +static const char *serdes_prtcl_str[] = { + [NONE] = "NA", + [PCIE1] = "PCIE1", + [PCIE2] = "PCIE2", + [PCIE3] = "PCIE3", + [PCIE4] = "PCIE4", + [SATA1] = "SATA1", + [SATA2] = "SATA2", + [SRIO1] = "SRIO1", + [SRIO2] = "SRIO2", + [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1", + [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2", + [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3", + [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4", + [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5", + [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1", + [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2", + [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3", + [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4", + [XAUI_FM1] = "XAUI_FM1", + [XAUI_FM2] = "XAUI_FM2", + [AURORA] = "DEBUG", +}; +#endif + +static const struct { + int idx; + unsigned int lpd; /* RCW lane powerdown bit */ + int bank; +} lanes[SRDS_MAX_LANES] = { + { 0, 152, FSL_SRDS_BANK_1 }, + { 1, 153, FSL_SRDS_BANK_1 }, + { 2, 154, FSL_SRDS_BANK_1 }, + { 3, 155, FSL_SRDS_BANK_1 }, + { 4, 156, FSL_SRDS_BANK_1 }, + { 5, 157, FSL_SRDS_BANK_1 }, + { 6, 158, FSL_SRDS_BANK_1 }, + { 7, 159, FSL_SRDS_BANK_1 }, + { 8, 160, FSL_SRDS_BANK_1 }, + { 9, 161, FSL_SRDS_BANK_1 }, + { 16, 162, FSL_SRDS_BANK_2 }, + { 17, 163, FSL_SRDS_BANK_2 }, + { 18, 164, FSL_SRDS_BANK_2 }, + { 19, 165, FSL_SRDS_BANK_2 }, + { 20, 170, FSL_SRDS_BANK_3 }, + { 21, 171, FSL_SRDS_BANK_3 }, + { 22, 172, FSL_SRDS_BANK_3 }, + { 23, 173, FSL_SRDS_BANK_3 }, +}; + +int serdes_get_lane_idx(int lane) +{ + return lanes[lane].idx; +} + +int serdes_get_bank(int lane) +{ + return lanes[lane].bank; +} + +int serdes_lane_enabled(int lane) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + + int bank = lanes[lane].bank; + int word = lanes[lane].lpd / 32; + int bit = lanes[lane].lpd % 32; + + if (in_be32(®s->bank[bank].rstctl) & SRDS_RSTCTL_SDPD) + return 0; + + return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit)); +} + +int is_serdes_configured(enum srds_prtcl device) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* Is serdes enabled at all? */ + if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) + return 0; + + return (1 << device) & serdes_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int cfg; + serdes_corenet_t *srds_regs; + int lane, bank, idx; + enum srds_prtcl lane_prtcl; + long long end_tick; + int have_bank[SRDS_MAX_BANK] = {}; + + /* Is serdes enabled@all? */ + if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) + return; + + srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR); + cfg = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; + debug("Using SERDES configuration 0x%x, lane settings:\n", cfg); + + if (!is_serdes_prtcl_valid(cfg)) { + printf("SERDES[PRTCL] = 0x%x is not valid\n", cfg); + return; + } + + /* Look for banks with all lanes disabled, and power down the bank. */ + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane); + if (serdes_lane_enabled(lane)) { + have_bank[serdes_get_bank(lane)] = 1; + serdes_prtcl_map |= (1 << lane_prtcl); + } + } + + for (bank = 0; bank < SRDS_MAX_BANK; bank++) { + if (!have_bank[bank]) { + printf("SERDES: bank %d disabled\n", bank + 1); + setbits_be32(&srds_regs->bank[bank].rstctl, + SRDS_RSTCTL_SDPD); + } + } + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + idx = serdes_get_lane_idx(lane); + lane_prtcl = serdes_get_prtcl(cfg, lane); + +#ifdef DEBUG + switch (lane) { + case 0: + puts("Bank1: "); + break; + case 10: + puts("\nBank2: "); + break; + case 14: + puts("\nBank3: "); + break; + default: + break; + } + + printf("%s ", serdes_prtcl_str[lane_prtcl]); +#endif + } + +#ifdef DEBUG + puts("\n"); +#endif + + for (idx = 0; idx < SRDS_MAX_BANK; idx++) { + u32 rstctl; + + bank = idx; + + /* Skip disabled banks */ + if (!have_bank[bank]) + continue; + + /* reset banks for errata */ + setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST); + + /* wait for reset complete or 1-second timeout */ + end_tick = usec2ticks(1000000) + get_ticks(); + do { + rstctl = in_be32(&srds_regs->bank[bank].rstctl); + if (rstctl & SRDS_RSTCTL_RSTDONE) + break; + } while (end_tick > get_ticks()); + + if (!(rstctl & SRDS_RSTCTL_RSTDONE)) { + printf("SERDES: timeout resetting bank %d\n", + bank + 1); + continue; + } + } +} diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h new file mode 100644 index 0000000..4e1f331 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -0,0 +1,40 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * Author: Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_CORENET_SERDES_H +#define __FSL_CORENET_SERDES_H + +#define SRDS_MAX_LANES 18 +#define SRDS_MAX_BANK 3 + +enum srds_bank { + FSL_SRDS_BANK_1 = 0, + FSL_SRDS_BANK_2 = 1, + FSL_SRDS_BANK_3 = 2, +}; + +int is_serdes_prtcl_valid(u32 prtcl); +int serdes_get_lane_idx(int lane); +int serdes_get_bank(int lane); +int serdes_lane_enabled(int lane); +enum srds_prtcl serdes_get_prtcl(int cfg, int lane); + +#endif /* __FSL_CORENET_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c new file mode 100644 index 0000000..eb6223c --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c @@ -0,0 +1,94 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet_serdes.h" + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x5] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x8] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0xd] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC3, + SGMII_FM2_DTSEC4, AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0xe] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, SGMII_FM2_DTSEC3, + SGMII_FM2_DTSEC4, AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0xf] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, AURORA, AURORA, XAUI_FM2, + XAUI_FM2, XAUI_FM2, XAUI_FM2, NONE, NONE, NONE, NONE}, + [0x10] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + NONE, NONE, NONE, NONE}, + [0x13] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x16] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}, + [0x19] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, PCIE3, PCIE3, PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}, + [0x1d] = {PCIE1, PCIE1, PCIE3, PCIE3, NONE, SRIO2, NONE, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x22] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, + [0x25] = {PCIE1, PCIE1, PCIE3, PCIE3, SRIO1, SRIO1, SRIO1, SRIO1, + AURORA, AURORA, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, +}; + +enum srds_prtcl serdes_get_prtcl(int cfg, int lane) +{ + if (!serdes_lane_enabled(lane)) + return NONE; + + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(u32 prtcl) { + int i; + + if (prtcl > ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index c7877b9..85518eb 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -32,8 +32,15 @@ enum srds_prtcl { SATA2, SRIO1, SRIO2, - SGMII_FM1, - SGMII_FM2, + SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, + SGMII_FM1_DTSEC5, + SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, + SGMII_FM2_DTSEC4, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3, -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 2010-07-15 22:15 [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES Kumar Gala @ 2010-07-15 22:15 ` Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala 2010-07-26 18:13 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala 2010-07-26 18:13 ` [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES Kumar Gala 1 sibling, 2 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-15 22:15 UTC (permalink / raw) To: u-boot Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 + arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 283 +++++++++++++++++++++++++ arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 4 + arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 4 + 4 files changed, 295 insertions(+), 0 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index d7835c8..01c462c 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -41,6 +41,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif +#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) + puts("Work-around for Erratum SERDES8 enabled\n"); +#endif + return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 1c03061..5bcf91a 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -21,10 +21,14 @@ */ #include <common.h> +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +#include <hwconfig.h> +#endif #include <asm/fsl_serdes.h> #include <asm/immap_85xx.h> #include <asm/io.h> #include <asm/processor.h> +#include <asm/fsl_law.h> #include "fsl_corenet_serdes.h" static u32 serdes_prtcl_map; @@ -102,6 +106,13 @@ int serdes_lane_enabled(int lane) if (in_be32(®s->bank[bank].rstctl) & SRDS_RSTCTL_SDPD) return 0; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) + if (bank > 0) + return !(srds_lpd_b[bank] & + (8 >> (lane - (6 + 4 * bank)))); +#endif + return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit)); } @@ -116,6 +127,140 @@ int is_serdes_configured(enum srds_prtcl device) return (1 << device) & serdes_prtcl_map; } +#ifndef CONFIG_SYS_DCSRBAR_PHYS +#define CONFIG_SYS_DCSRBAR_PHYS 0x80000000 /* Must be 1GB-aligned for rev1.0 */ +#define CONFIG_SYS_DCSRBAR 0x80000000 +#define __DCSR_NOT_DEFINED_BY_CONFIG +#endif + +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +static void enable_bank(ccsr_gur_t *gur, int bank) +{ + u32 rcw5; + + /* + * Enable the lanes SRDS_LPD_Bn. The RCW bits are read-only in + * CCSR, and read/write in DSCR. + */ + rcw5 = in_be32(gur->rcwsr + 5); + if (bank == FSL_SRDS_BANK_2) { + rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B2; + rcw5 |= srds_lpd_b[bank] << 26; + } else if (bank == FSL_SRDS_BANK_3) { + rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B3; + rcw5 |= srds_lpd_b[bank] << 18; + } else { + printf("SERDES: enable_bank: bad bank %d\n", bank + 1); + return; + } + + /* See similar code in cpu/mpc85xx/cpu_init.c for an explanation + * of the DCSR mapping. + */ + { +#ifdef __DCSR_NOT_DEFINED_BY_CONFIG + struct law_entry law = find_law(CONFIG_SYS_DCSRBAR_PHYS); + int law_index; + if (law.index == -1) + law_index = set_next_law(CONFIG_SYS_DCSRBAR_PHYS, + LAW_SIZE_1M, LAW_TRGT_IF_DCSR); + else + set_law(law.index, CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M, + LAW_TRGT_IF_DCSR); +#endif + u32 *p = (void *)CONFIG_SYS_DCSRBAR + 0x20114; + out_be32(p, rcw5); +#ifdef __DCSR_NOT_DEFINED_BY_CONFIG + if (law.index == -1) + disable_law(law_index); + else + set_law(law.index, law.addr, law.size, law.trgt_id); +#endif + } +} + +/* + * To avoid problems with clock jitter, rev 2 p4080 uses the pll from + * bank 3 to clock banks 2 and 3, as well as a limited selection of + * protocol configurations. This requires that banks 2 and 3's lanes be + * disabled in the RCW, and enabled with some fixup here to re-enable + * them, and to configure bank 2's clock parameters in bank 3's pll in + * cases where they differ. + */ +static void p4080_erratum_serdes8(serdes_corenet_t *regs, ccsr_gur_t *gur, + u32 devdisr, u32 devdisr2, int cfg) +{ + int srds_ratio_b2; + int rfck_sel; + + /* + * The disabled lanes of bank 2 will cause the associated + * logic blocks to be disabled in DEVDISR. We reverse that here. + * + * Note that normally it is not permitted to clear DEVDISR bits + * once the device has been disabled, but the hardware people + * say that this special case is OK. + */ + clrbits_be32(&gur->devdisr, devdisr); + clrbits_be32(&gur->devdisr2, devdisr2); + + /* + * Some protocols require special handling. There are a few + * additional protocol configurations that can be used, which are + * not listed here. See app note 4065 for supported protocol + * configurations. + */ + switch (cfg) { + case 0x19: + /* + * Bank 2 has PCIe which wants BWSEL -- tell bank 3's PLL. + * SGMII on bank 3 should still be usable. + */ + setbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr1, + SRDS_PLLCR1_PLL_BWSEL); + + enable_bank(gur, FSL_SRDS_BANK_3); + break; + + case 0x0f: + case 0x10: + /* + * Banks 2 (XAUI) and 3 (SGMII) have different clocking + * requirements in these configurations. Bank 3 cannot + * be used and should have its lanes (but not the bank + * itself) disabled in the RCW. We set up bank 3's pll + * for bank 2's needs here. + */ + srds_ratio_b2 = (in_be32(&gur->rcwsr[4]) >> 13) & 7; + + /* Determine refclock from XAUI ratio */ + switch (srds_ratio_b2) { + case 1: /* 20:1 */ + rfck_sel = SRDS_PLLCR0_RFCK_SEL_156_25; + break; + case 2: /* 25:1 */ + rfck_sel = SRDS_PLLCR0_RFCK_SEL_125; + break; + default: + printf("SERDES: bad SRDS_RATIO_B2 %d\n", + srds_ratio_b2); + return; + } + + clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0, + SRDS_PLLCR0_RFCK_SEL_MASK, rfck_sel); + + clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0, + SRDS_PLLCR0_FRATE_SEL_MASK, + SRDS_PLLCR0_FRATE_SEL_6_25); + break; + default: + enable_bank(gur, FSL_SRDS_BANK_3); + } + +} +#endif + void fsl_serdes_init(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -125,6 +270,13 @@ void fsl_serdes_init(void) enum srds_prtcl lane_prtcl; long long end_tick; int have_bank[SRDS_MAX_BANK] = {}; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + u32 serdes8_devdisr = 0; + u32 serdes8_devdisr2 = 0; + char srds_lpd_opt[16]; + const char *srds_lpd_arg; + size_t arglen; +#endif /* Is serdes enabled at all? */ if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) @@ -139,6 +291,18 @@ void fsl_serdes_init(void) return; } +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) + for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) { + sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1); + srds_lpd_arg = hwconfig_subarg("serdes", srds_lpd_opt, + &arglen); + if (srds_lpd_arg) + srds_lpd_b[bank] = simple_strtoul(srds_lpd_arg, + NULL, 0); + } +#endif + /* Look for banks with all lanes disabled, and power down the bank. */ for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane); @@ -148,6 +312,35 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (IS_SVR_REV(get_svr(), 1, 0)) { + /* At least one bank must be disabled due to SERDES8. If + * no bank is found to be disabled based on lane + * disables, disable bank 3 because we can't turn off its + * lanes in the RCW without disabling MDIO due to erratum + * GEN8. + * + * This means that if you are relying on bank 3 being + * disabled to avoid SERDES8, in some cases you cannot + * also disable all lanes of another bank, or else bank + * 3 won't be disabled, leaving you with a configuration + * that isn't valid according to SERDES8 (e.g. if banks + * 2 and 3 have the same clock, and bank 1 is disabled + * instead of 3). + */ + for (bank = 0; bank < SRDS_MAX_BANK; bank++) { + if (!have_bank[bank]) + break; + } + + if (bank == SRDS_MAX_BANK) + have_bank[FSL_SRDS_BANK_3] = 0; + } else { + if (have_bank[FSL_SRDS_BANK_2]) + have_bank[FSL_SRDS_BANK_3] = 1; + } +#endif + for (bank = 0; bank < SRDS_MAX_BANK; bank++) { if (!have_bank[bank]) { printf("SERDES: bank %d disabled\n", bank + 1); @@ -177,6 +370,68 @@ void fsl_serdes_init(void) printf("%s ", serdes_prtcl_str[lane_prtcl]); #endif + +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + switch (lane_prtcl) { + case PCIE1: + case PCIE2: + case PCIE3: + serdes8_devdisr |= FSL_CORENET_DEVDISR_PCIE1 >> + (lane_prtcl - PCIE1); + break; + case SRIO1: + case SRIO2: + serdes8_devdisr |= FSL_CORENET_DEVDISR_SRIO1 >> + (lane_prtcl - SRIO1); + break; + case SGMII_FM1_DTSEC1: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_1; + break; + case SGMII_FM1_DTSEC2: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_2; + break; + case SGMII_FM1_DTSEC3: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_3; + break; + case SGMII_FM1_DTSEC4: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_DTSEC1_4; + break; + case SGMII_FM2_DTSEC1: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_1; + break; + case SGMII_FM2_DTSEC2: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_2; + break; + case SGMII_FM2_DTSEC3: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_3; + break; + case SGMII_FM2_DTSEC4: + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_DTSEC2_4; + break; + case XAUI_FM1: + case XAUI_FM2: + if (lane_prtcl == XAUI_FM1) + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | + FSL_CORENET_DEVDISR2_10GEC1; + else + serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | + FSL_CORENET_DEVDISR2_10GEC2; + break; + case AURORA: + break; + default: + break; + } + +#endif } #ifdef DEBUG @@ -188,10 +443,38 @@ void fsl_serdes_init(void) bank = idx; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) { + /* + * Change bank init order to 0, 2, 1, so that the + * third bank's PLL is established before we + * start the second bank which shares the third + * bank's PLL. + */ + + if (idx == 1) + bank = FSL_SRDS_BANK_3; + else if (idx == 2) + bank = FSL_SRDS_BANK_2; + } +#endif + /* Skip disabled banks */ if (!have_bank[bank]) continue; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 + if (!IS_SVR_REV(get_svr(), 1, 0)) { + if (idx == 1) { + p4080_erratum_serdes8(srds_regs, gur, + serdes8_devdisr, + serdes8_devdisr2, cfg); + } else if (idx == 2) { + enable_bank(gur, FSL_SRDS_BANK_2); + } + } +#endif + /* reset banks for errata */ setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_RST); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h index 4e1f331..42d771e 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -37,4 +37,8 @@ int serdes_get_bank(int lane); int serdes_lane_enabled(int lane); enum srds_prtcl serdes_get_prtcl(int cfg, int lane); +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +extern uint16_t srds_lpd_b[SRDS_MAX_BANK]; +#endif + #endif /* __FSL_CORENET_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c index eb6223c..87bd795 100644 --- a/arch/powerpc/cpu/mpc85xx/p4080_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/p4080_serdes.c @@ -71,6 +71,10 @@ static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1}, }; +#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 +uint16_t srds_lpd_b[SRDS_MAX_BANK]; +#endif + enum srds_prtcl serdes_get_prtcl(int cfg, int lane) { if (!serdes_lane_enabled(lane)) -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 2010-07-15 22:15 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala @ 2010-07-15 22:15 ` Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board Kumar Gala 2010-07-26 18:13 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala 2010-07-26 18:13 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala 1 sibling, 2 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-15 22:15 UTC (permalink / raw) To: u-boot Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +++- arch/powerpc/cpu/mpc85xx/cpu_init.c | 7 +++++++ arch/powerpc/cpu/mpc85xx/release.S | 6 ++++++ arch/powerpc/include/asm/processor.h | 1 + 4 files changed, 17 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 01c462c..d73f3d7 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -44,7 +44,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) puts("Work-around for Erratum SERDES8 enabled\n"); #endif - +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) + puts("Work-around for Erratum CPU22 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index a90ebb1..2c3be6d 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -32,6 +32,7 @@ #include <ioports.h> #include <sata.h> #include <asm/io.h> +#include <asm/cache.h> #include <asm/mmu.h> #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> @@ -245,6 +246,12 @@ int cpu_init_r(void) volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; #endif +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) + flush_dcache(); + mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS)); + sync(); +#endif + puts ("L2: "); #if defined(CONFIG_L2_CACHE) diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 0b5b9da..53cefaf 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -136,6 +136,12 @@ __secondary_start_page: mtspr L1CSR2,r8 #endif +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) + mfspr r8,L1CSR2 + oris r8,r8,(L1CSR2_DCWS)@h + mtspr L1CSR2,r8 +#endif + #ifdef CONFIG_BACKSIDE_L2_CACHE /* Enable/invalidate the L2 cache */ msync diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 89f283a..84a1e2e 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -495,6 +495,7 @@ #define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */ #define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */ +#define L1CSR2_DCWS 0x40000000 /* Data Cache Write Shadow */ #define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */ #define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ #define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board 2010-07-15 22:15 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala @ 2010-07-15 22:15 ` Kumar Gala 2010-07-21 16:31 ` Peter Tyser 2010-07-26 18:13 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala 1 sibling, 1 reply; 12+ messages in thread From: Kumar Gala @ 2010-07-15 22:15 UTC (permalink / raw) To: u-boot Add support for the P4080DS board, with the following features: * 36-bit only * Boots from NOR flash * FMAN drivers NOT supported * SPD & fixed sdram DDR Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Ashish Kalra <Ashish.Kalra@freescale.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- MAKEALL | 1 + board/freescale/common/Makefile | 1 + board/freescale/corenet_ds/Makefile | 55 +++ board/freescale/corenet_ds/config.mk | 30 ++ board/freescale/corenet_ds/corenet_ds.c | 365 +++++++++++++++++ board/freescale/corenet_ds/ddr.c | 176 ++++++++ board/freescale/corenet_ds/law.c | 40 ++ board/freescale/corenet_ds/pci.c | 127 ++++++ board/freescale/corenet_ds/tlb.c | 104 +++++ boards.cfg | 1 + include/configs/P4080DS.h | 36 ++ include/configs/corenet_ds.h | 673 +++++++++++++++++++++++++++++++ 12 files changed, 1609 insertions(+), 0 deletions(-) create mode 100644 board/freescale/corenet_ds/Makefile create mode 100644 board/freescale/corenet_ds/config.mk create mode 100644 board/freescale/corenet_ds/corenet_ds.c create mode 100644 board/freescale/corenet_ds/ddr.c create mode 100644 board/freescale/corenet_ds/law.c create mode 100644 board/freescale/corenet_ds/pci.c create mode 100644 board/freescale/corenet_ds/tlb.c create mode 100644 include/configs/P4080DS.h create mode 100644 include/configs/corenet_ds.h diff --git a/MAKEALL b/MAKEALL index e495b93..f0da775 100755 --- a/MAKEALL +++ b/MAKEALL @@ -427,6 +427,7 @@ LIST_85xx=" \ P2020RDB_NAND \ P2020RDB_SDCARD \ P2020RDB_SPIFLASH \ + P4080DS \ PM854 \ PM856 \ sbc8540 \ diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 2d48d7e..f93045f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o COBJS-$(CONFIG_P1022DS) += ics307_clk.o COBJS-$(CONFIG_P2020DS) += ics307_clk.o +COBJS-$(CONFIG_P4080DS) += ics307_clk.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile new file mode 100644 index 0000000..8aa7255 --- /dev/null +++ b/board/freescale/corenet_ds/Makefile @@ -0,0 +1,55 @@ +# +# Copyright 2007-2009 Freescale Semiconductor, Inc. +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-$(CONFIG_DDR_SPD) += ddr.o +COBJS-$(CONFIG_PCI) += pci.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/corenet_ds/config.mk b/board/freescale/corenet_ds/config.mk new file mode 100644 index 0000000..72db24e --- /dev/null +++ b/board/freescale/corenet_ds/config.mk @@ -0,0 +1,30 @@ +# +# Copyright 2007-2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# P4080DS board +# +ifndef TEXT_BASE +TEXT_BASE = 0xeff80000 +endif + +RESET_VECTOR_ADDRESS = 0xeffffffc diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c new file mode 100644 index 0000000..ed41e1d --- /dev/null +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -0,0 +1,365 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +extern void pci_of_setup(void *blob, bd_t *bd); + +#include "../common/ngpixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +void cpu_mp_lmb_reserve(struct lmb *lmb); + +int checkboard (void) +{ + u8 sw; + struct cpu_type *cpu = gd->cpu; + + printf("Board: %sDS, ", cpu->name); + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); + + sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); + sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank: %d\n", sw); + else if (sw == 0x8) + puts("Promjet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else + printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); + +#ifdef CONFIG_PHYS_64BIT + puts("36-bit Addressing\n"); +#endif + + /* Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES Reference Clocks: "); + sw = in_8(&PIXIS_SW(3)); + printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100); + printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125"); + printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125"); + + return 0; +} + +int board_early_init_f(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* + * P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3 + * disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce + * the noise introduced by these unterminated and unused clock pairs. + */ + setbits_be32(&gur->ddrclkdr, 0x001B001B); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ + 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ + + set_liodns(); + setup_portals(); + +#ifdef CONFIG_SRIO1 + if (is_serdes_configured(SRIO1)) { + set_next_law(CONFIG_SYS_RIO1_MEM_PHYS, LAW_SIZE_256M, + LAW_TRGT_IF_RIO_1); + } else { + printf (" SRIO1: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); /* disable */ +#endif + +#ifdef CONFIG_SRIO2 + if (is_serdes_configured(SRIO2)) { + set_next_law(CONFIG_SYS_RIO2_MEM_PHYS, LAW_SIZE_256M, + LAW_TRGT_IF_RIO_2); + } else { + printf (" SRIO2: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); /* disable */ +#endif + + return 0; +} + +static const char *serdes_clock_to_string(u32 clock) +{ + switch(clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + case SRDS_PLLCR0_RFCK_SEL_156_25: + return "156.25"; + default: + return "???"; + } +} + +#define NUM_SRDS_BANKS 3 + +int misc_init_r(void) +{ + serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 actual[NUM_SRDS_BANKS]; + unsigned int i; + u8 sw3; + + /* Warn if the expected SERDES reference clocks don't match the + * actual reference clocks. This needs to be done after calling + * p4080_erratum_serdes8(), since that function may modify the clocks. + */ + sw3 = in_8(&PIXIS_SW(3)); + actual[0] = (sw3 & 0x40) ? + SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100; + actual[1] = (sw3 & 0x20) ? + SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; + actual[2] = (sw3 & 0x10) ? + SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; + + for (i = 0; i < NUM_SRDS_BANKS; i++) { + u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; + if (expected != actual[i]) { + printf("Warning: SERDES bank %u expects reference clock" + " %sMHz, but actual is %sMHz\n", i + 1, + serdes_clock_to_string(expected), + serdes_clock_to_string(actual[i])); + } + } + + return 0; +} + +#ifndef CONFIG_DDR_SPD +/* + * Fixed sdram init -- doesn't use serial presence detect. + */ +phys_size_t fixed_sdram (void) +{ + volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR; + volatile ccsr_ddr_t *ddr2 = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + uint sdram_cfg; + + ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; + ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; + ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG; + ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; + ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; + ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; + ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; + ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL; + ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; + ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; + ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; + ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; + ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL; + ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL; + ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1; + ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4; + ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5; + ddr->debug_18 = CONFIG_SYS_DDR_DEBUG_18; + + ddr2->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS; + ddr2->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG; + ddr2->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS; + ddr2->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG; + ddr2->timing_cfg_3 = CONFIG_SYS_DDR2_TIMING_3; + ddr2->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0; + ddr2->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1; + ddr2->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2; + ddr2->sdram_mode = CONFIG_SYS_DDR2_MODE_1; + ddr2->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2; + ddr2->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTRL; + ddr2->sdram_interval = CONFIG_SYS_DDR2_INTERVAL; + ddr2->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT; + ddr2->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL; + ddr2->sdram_cfg_2 = CONFIG_SYS_DDR2_CONTROL2; + ddr2->ddr_zq_cntl = CONFIG_SYS_DDR2_ZQ_CNTL; + ddr2->ddr_wrlvl_cntl = CONFIG_SYS_DDR2_WRLVL_CNTL; + ddr2->ddr_cdr1 = CONFIG_SYS_DDR2_CDR1; + ddr2->timing_cfg_4 = CONFIG_SYS_DDR2_TIMING_4; + ddr2->timing_cfg_5 = CONFIG_SYS_DDR2_TIMING_5; + ddr2->debug_18 = CONFIG_SYS_DDR2_DEBUG_18; + +#ifdef CONFIG_DDR_ECC + /* ECC will be assumed in stable mode */ + ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; + ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; + ddr->err_sbe = CONFIG_SYS_DDR_SBE; + ddr2->err_int_en = CONFIG_SYS_DDR2_ERR_INT_EN; + ddr2->err_disable = CONFIG_SYS_DDR2_ERR_DIS; + ddr2->err_sbe = CONFIG_SYS_DDR2_SBE; + sdram_cfg = CONFIG_SYS_DDR_CONTROL | 0x20000000; +#else + sdram_cfg = CONFIG_SYS_DDR_CONTROL; +#endif + + asm("sync;isync"); + udelay(500); + + ddr->sdram_cfg = sdram_cfg; + ddr2->sdram_cfg = sdram_cfg; + +#ifdef CONFIG_ECC_INIT_VIA_DDRCONTROLLER + /* + * Poll until memory is initialized. 512 Meg at 400MHz might hit this + * 200 times or so. + */ + while ((ddr->sdram_cfg_2 & 16) != 0) { + debug("sdram_cfg2 = 0x%08x\n", ddr->sdram_cfg_2); + udelay(1000); + } + asm("sync; isync"); + udelay(500); + + while ((ddr2->sdram_cfg_2 & 16) != 0) { + debug("sdram_cfg2 = 0x%08x\n", ddr2->sdram_cfg_2); + udelay(1000); + } + asm("sync; isync"); + udelay(500); +#endif + + /* We assume that CONFIG_SYS_SDRAM_SIZE == 4096, because there's + * no easy way to map CONFIG_SYS_SDRAM_SIZE to enum law_size. + */ + set_last_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); + set_last_law(2048*1024*1024UL, LAW_SIZE_2G, LAW_TRGT_IF_DDR_2); + + return min(CONFIG_SYS_SDRAM_SIZE * 0x100000ull, CONFIG_MAX_MEM_MAPPED); +} +#endif + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....\n"); + +#ifdef CONFIG_DDR_SPD + dram_size = fsl_ddr_sdram(); +#else + dram_size = fixed_sdram(); +#endif + setup_ddr_tlbs(dram_size / 0x100000); + + puts(" DDR: "); + return dram_size; +} + +#ifdef CONFIG_MP +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif + +void ft_srio_setup(void *blob) +{ +#ifdef CONFIG_SRIO1 + if (!is_serdes_configured(SRIO1)) { + fdt_del_node_and_alias(blob, "rio0"); + } +#else + fdt_del_node_and_alias(blob, "rio0"); +#endif +#ifdef CONFIG_SRIO2 + if (!is_serdes_configured(SRIO2)) { + fdt_del_node_and_alias(blob, "rio1"); + } +#else + fdt_del_node_and_alias(blob, "rio1"); +#endif +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + ft_srio_setup(blob); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c new file mode 100644 index 0000000..82b2b4f --- /dev/null +++ b/board/freescale/corenet_ds/ddr.c @@ -0,0 +1,176 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) +{ + int ret; + + ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); + if (ret) { + debug("DDR: failed to read SPD from address %u\n", i2c_address); + memset(spd, 0, sizeof(ddr3_spd_eeprom_t)); + } +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (ctrl_num == 0 && i == 0) + i2c_address = SPD_EEPROM_ADDRESS1; + else if (ctrl_num == 1 && i == 0) + i2c_address = SPD_EEPROM_ADDRESS2; + + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} + +typedef struct { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +} board_specific_parameters_t; + +/* ranges for parameters: + * wr_data_delay = 0-6 + * clk adjust = 0-8 + * cpo 2-0x1E (30) + */ + + +/* XXX: these values need to be checked for all interleaving modes. */ +/* XXX: No reliable dual-rank 800 MHz setting has been found. It may + * seem reliable, but errors will appear when memory intensive + * program is run. */ +/* XXX: Single rank@800 MHz is OK. */ +const board_specific_parameters_t board_specific_parameters[][20] = { + { + /* memory controller 0 */ + /* lo| hi| num| clk| cpo|wrdata|2T */ + /* mhz| mhz|ranks|adjst| | delay| */ + { 0, 333, 2, 6, 7, 3, 0}, + {334, 400, 2, 6, 9, 3, 0}, + {401, 549, 2, 6, 11, 3, 0}, + {550, 680, 2, 1, 10, 5, 0}, + {681, 850, 2, 1, 12, 5, 0}, + {851, 1050, 2, 1, 12, 5, 0}, + {1051, 1250, 2, 1, 15, 4, 0}, + {1251, 1350, 2, 1, 15, 4, 0}, + { 0, 333, 1, 6, 7, 3, 0}, + {334, 400, 1, 6, 9, 3, 0}, + {401, 549, 1, 6, 11, 3, 0}, + {550, 680, 1, 1, 10, 5, 0}, + {681, 850, 1, 1, 12, 5, 0} + }, + + { + /* memory controller 1 */ + /* lo| hi| num| clk| cpo|wrdata|2T */ + /* mhz| mhz|ranks|adjst| | delay| */ + { 0, 333, 2, 6, 7, 3, 0}, + {334, 400, 2, 6, 9, 3, 0}, + {401, 549, 2, 6, 11, 3, 0}, + {550, 680, 2, 1, 11, 6, 0}, + {681, 850, 2, 1, 13, 6, 0}, + {851, 1050, 2, 1, 13, 6, 0}, + {1051, 1250, 2, 1, 15, 4, 0}, + {1251, 1350, 2, 1, 15, 4, 0}, + { 0, 333, 1, 6, 7, 3, 0}, + {334, 400, 1, 6, 9, 3, 0}, + {401, 549, 1, 6, 11, 3, 0}, + {550, 680, 1, 1, 11, 6, 0}, + {681, 850, 1, 1, 13, 6, 0} + } +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const board_specific_parameters_t *pbsp = + &(board_specific_parameters[ctrl_num][0]); + u32 num_params = sizeof(board_specific_parameters[ctrl_num]) / + sizeof(board_specific_parameters[0][0]); + u32 i; + ulong ddr_freq; + + /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in + * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If + * there are two dimms in the controller, set odt_rd_cfg to 3 and + * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. + */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i&1) { /* odd CS */ + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } else { /* even CS */ + if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { + popts->cs_local_opts[i].odt_rd_cfg = 3; + popts->cs_local_opts[i].odt_wr_cfg = 3; + } + } + } + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + for (i = 0; i < num_params; i++) { + if (ddr_freq >= pbsp->datarate_mhz_low && + ddr_freq <= pbsp->datarate_mhz_high && + pdimm->n_ranks == pbsp->n_ranks) { + popts->cpo_override = 0xff; /* force auto CPO calibration */ + popts->write_data_delay = 2; + popts->clk_adjust = 5; /* Force value to be 5/8 clock cycle */ + popts->twoT_en = pbsp->force_2T; + } + pbsp++; + } + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xa; + popts->wrlvl_start = 0x7; + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 1; + popts->rtt_override_value = DDR3_RTT_120_OHM; + popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ + + /* Enable ZQ calibration */ + popts->zq_en = 1; +} diff --git a/board/freescale/corenet_ds/law.c b/board/freescale/corenet_ds/law.c new file mode 100644 index 0000000..43b4b97 --- /dev/null +++ b/board/freescale/corenet_ds/law.c @@ -0,0 +1,40 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd at denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN), + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN), + SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/corenet_ds/pci.c b/board/freescale/corenet_ds/pci.c new file mode 100644 index 0000000..2994e36 --- /dev/null +++ b/board/freescale/corenet_ds/pci.c @@ -0,0 +1,127 @@ +/* + * Copyright 2007-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif + +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif + +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +void pci_init_board(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct fsl_pci_info pci_info[3]; + u32 devdisr; + int first_free_busno = 0; + int num = 0; + + int pcie_ep, pcie_configured; + + devdisr = in_be32(&gur->devdisr); + + debug (" pci_init_board: devdisr=%x\n", devdisr); + +#ifdef CONFIG_PCIE1 + pcie_configured = is_serdes_configured(PCIE1); + + if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE1)) { + set_next_law(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, + LAW_TRGT_IF_PCIE_1); + set_next_law(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, + LAW_TRGT_IF_PCIE_1); + SET_STD_PCIE_INFO(pci_info[num], 1); + pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); + printf(" PCIE1 connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); + } else { + printf (" PCIE1: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE1); /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + pcie_configured = is_serdes_configured(PCIE2); + + if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE2)) { + set_next_law(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, + LAW_TRGT_IF_PCIE_2); + set_next_law(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, + LAW_TRGT_IF_PCIE_2); + SET_STD_PCIE_INFO(pci_info[num], 2); + pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); + printf(" PCIE2 connected to Slot 3 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); + } else { + printf (" PCIE2: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE2); /* disable */ +#endif + +#ifdef CONFIG_PCIE3 + pcie_configured = is_serdes_configured(PCIE3); + + if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE3)) { + set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, + LAW_TRGT_IF_PCIE_3); + set_next_law(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, + LAW_TRGT_IF_PCIE_3); + SET_STD_PCIE_INFO(pci_info[num], 3); + pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); + printf(" PCIE3 connected to Slot 2 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); + } else { + printf (" PCIE3: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE3); /* disable */ +#endif +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c new file mode 100644 index 0000000..cecf816 --- /dev/null +++ b/board/freescale/corenet_ds/tlb.c @@ -0,0 +1,104 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd at denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_1M, 1), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_4M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/boards.cfg b/boards.cfg index 5043833..8187b68 100644 --- a/boards.cfg +++ b/boards.cfg @@ -340,6 +340,7 @@ MPC8540ADS powerpc mpc85xx mpc8540ads freescale MPC8544DS powerpc mpc85xx mpc8544ds freescale MPC8560ADS powerpc mpc85xx mpc8560ads freescale MPC8568MDS powerpc mpc85xx mpc8568mds freescale +P4080DS powerpc mpc85xx corenet_ds freescale XPEDITE5200 powerpc mpc85xx xpedite5200 xes XPEDITE5370 powerpc mpc85xx xpedite5370 xes P1022DS powerpc mpc85xx p1022ds freescale diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h new file mode 100644 index 0000000..5120c07 --- /dev/null +++ b/include/configs/P4080DS.h @@ -0,0 +1,36 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P4080 DS board configuration file + * + */ +#define CONFIG_P4080DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P4080 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_NUM_DDR_CONTROLLERS 2 + +#define CONFIG_SYS_P4080_ERRATUM_CPU22 +#define CONFIG_SYS_P4080_ERRATUM_SERDES8 + +#include "corenet_ds.h" diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h new file mode 100644 index 0000000..0606119 --- /dev/null +++ b/include/configs/corenet_ds.h @@ -0,0 +1,673 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P4080 DS board configuration file + * + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/freescale/common/ics307_clk.h" + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_MP /* support multiple processors */ + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +#define CONFIG_SYS_HAS_SERDES /* has SERDES */ + +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ +//#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xfe000000 /* relocated CCSRBAR */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_CCSRBAR_PHYS 0xffe000000ull /* physical addr of CCSRBAR */ +#else +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ +#endif +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 + +#ifdef CONFIG_DDR_SPD +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#else +#define CONFIG_SYS_SDRAM_SIZE 4096 + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f +#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f +#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 +#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202 +#define CONFIG_SYS_DDR_TIMING_3 0x01031000 +#define CONFIG_SYS_DDR_TIMING_0 0x55440804 +#define CONFIG_SYS_DDR_TIMING_1 0x74713a66 +#define CONFIG_SYS_DDR_TIMING_2 0x0fb8911b +#define CONFIG_SYS_DDR_MODE_1 0x00421850 +#define CONFIG_SYS_DDR_MODE_2 0x00100000 +#define CONFIG_SYS_DDR_MODE_CTRL 0x00000000 +#define CONFIG_SYS_DDR_INTERVAL 0x10400100 +#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef +#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 +#define CONFIG_SYS_DDR_TIMING_4 0x00220001 +#define CONFIG_SYS_DDR_TIMING_5 0x03401500 +#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 +#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8655a608 +#define CONFIG_SYS_DDR_CONTROL 0xc7048000 +#define CONFIG_SYS_DDR_CONTROL2 0x24400011 +#define CONFIG_SYS_DDR_CDR1 0x00000000 +#define CONFIG_SYS_DDR_CDR2 0x00000000 +#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d +#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 +#define CONFIG_SYS_DDR_SBE 0x00010000 +#define CONFIG_SYS_DDR_DEBUG_18 0x40100400 + +#define CONFIG_SYS_DDR2_CS0_BNDS 0x008000bf +#define CONFIG_SYS_DDR2_CS1_BNDS 0x00C000ff +#define CONFIG_SYS_DDR2_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG +#define CONFIG_SYS_DDR2_CS1_CONFIG CONFIG_SYS_DDR_CS1_CONFIG +#define CONFIG_SYS_DDR2_TIMING_3 CONFIG_SYS_DDR_TIMING_3 +#define CONFIG_SYS_DDR2_TIMING_0 CONFIG_SYS_DDR_TIMING_0 +#define CONFIG_SYS_DDR2_TIMING_1 CONFIG_SYS_DDR_TIMING_1 +#define CONFIG_SYS_DDR2_TIMING_2 CONFIG_SYS_DDR_TIMING_2 +#define CONFIG_SYS_DDR2_MODE_1 CONFIG_SYS_DDR_MODE_1 +#define CONFIG_SYS_DDR2_MODE_2 CONFIG_SYS_DDR_MODE_2 +#define CONFIG_SYS_DDR2_MODE_CTRL CONFIG_SYS_DDR_MODE_CTRL +#define CONFIG_SYS_DDR2_INTERVAL CONFIG_SYS_DDR_INTERVAL +#define CONFIG_SYS_DDR2_DATA_INIT CONFIG_SYS_DDR_DATA_INIT +#define CONFIG_SYS_DDR2_CLK_CTRL CONFIG_SYS_DDR_CLK_CTRL +#define CONFIG_SYS_DDR2_TIMING_4 CONFIG_SYS_DDR_TIMING_4 +#define CONFIG_SYS_DDR2_TIMING_5 CONFIG_SYS_DDR_TIMING_5 +#define CONFIG_SYS_DDR2_ZQ_CNTL CONFIG_SYS_DDR_ZQ_CNTL +#define CONFIG_SYS_DDR2_WRLVL_CNTL CONFIG_SYS_DDR_WRLVL_CNTL +#define CONFIG_SYS_DDR2_CONTROL CONFIG_SYS_DDR_CONTROL +#define CONFIG_SYS_DDR2_CONTROL2 CONFIG_SYS_DDR_CONTROL2 +#define CONFIG_SYS_DDR2_CDR1 CONFIG_SYS_DDR_CDR1 +#define CONFIG_SYS_DDR2_CDR2 CONFIG_SYS_DDR_CDR2 +#define CONFIG_SYS_DDR2_ERR_INT_EN CONFIG_SYS_DDR_ERR_INT_EN +#define CONFIG_SYS_DDR2_ERR_DIS CONFIG_SYS_DDR_ERR_DIS +#define CONFIG_SYS_DDR2_SBE CONFIG_SYS_DDR_SBE +#define CONFIG_SYS_DDR2_DEBUG_18 CONFIG_SYS_DDR_DEBUG_18 + +#endif + +/* + * Local Bus Definitions + */ + +/* Set the local bus clock 1/8 of platform clock */ +#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 + +#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull +#else +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif + +#define CONFIG_SYS_BR0_PRELIM \ + (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \ + BR_PS_16 | BR_V) +#define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ + | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) + +#define CONFIG_SYS_BR1_PRELIM \ + (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 + +#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ +#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ +#ifdef CONFIG_PHYS_64BIT +#define PIXIS_BASE_PHYS 0xfffdf0000ull +#else +#define PIXIS_BASE_PHYS PIXIS_BASE +#endif + +#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ + +#define PIXIS_LBMAP_SWITCH 7 +#define PIXIS_LBMAP_MASK 0xf0 +#define PIXIS_LBMAP_SHIFT 4 +#define PIXIS_LBMAP_ALTBANK 0x40 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + (CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 0x100000000ull + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif +#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x118000 +#define CONFIG_SYS_I2C2_OFFSET 0x118100 + +/* + * RapidIO + */ +#define CONFIG_SYS_RIO1_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_RIO1_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_RIO1_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_RIO1_MEM_SIZE 0x10000000 /* 256M */ + +#define CONFIG_SYS_RIO2_MEM_VIRT 0xb0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_RIO2_MEM_PHYS 0xc30000000ull +#else +#define CONFIG_SYS_RIO2_MEM_PHYS 0xb0000000 +#endif +#define CONFIG_SYS_RIO2_MEM_SIZE 0x10000000 /* 256M */ + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 +#endif +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xe0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 +#endif +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 10 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#else +#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#endif +#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 10 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull +#else +#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#endif +#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +/* Default address of microcode for the Linux Fman driver */ +#define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FMAN_FW_ADDR_PHYS 0xFEF000000ULL +#else +#define CONFIG_SYS_FMAN_FW_ADDR_PHYS CONFIG_SYS_FMAN_FW_ADDR +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#endif + +#ifdef CONFIG_PCI + +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT + +/* video */ +#define CONFIG_VIDEO + +#ifdef CONFIG_VIDEO +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET +#endif + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#ifndef CONFIG_PCI_PNP +#define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS +#define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS +#define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_FM1_ETH0 +#define CONFIG_SYS_FM1_ETH0_PHY_ADDR 0x1c +#define CONFIG_SYS_FM1_ETH0_MODE SGMII +#define CONFIG_FM1_ETH1 +#define CONFIG_SYS_FM1_ETH1_PHY_ADDR 0x1d +#define CONFIG_SYS_FM1_ETH1_MODE SGMII +#define CONFIG_FM1_ETH2 +#define CONFIG_SYS_FM1_ETH2_PHY_ADDR 0x1e +#define CONFIG_SYS_FM1_ETH2_MODE SGMII +#define CONFIG_FM1_ETH3 +#define CONFIG_SYS_FM1_ETH3_PHY_ADDR 0x1f +#define CONFIG_SYS_FM1_ETH3_MODE SGMII +#define CONFIG_FM1_ETH4 +#define CONFIG_SYS_FM1_ETH4_PHY_ADDR 4 +#define CONFIG_SYS_FM1_ETH4_MODE XAUI + +#if (CONFIG_SYS_NUM_FMAN == 2) +#define CONFIG_FM2_ETH0 +#define CONFIG_SYS_FM2_ETH0_PHY_ADDR 0x1c +#define CONFIG_SYS_FM2_ETH0_MODE SGMII +#define CONFIG_FM2_ETH1 +#define CONFIG_SYS_FM2_ETH1_PHY_ADDR 0x1d +#define CONFIG_SYS_FM2_ETH1_MODE SGMII +#define CONFIG_FM2_ETH2 +#define CONFIG_SYS_FM2_ETH2_PHY_ADDR 0x1e +#define CONFIG_SYS_FM2_ETH2_MODE SGMII +#define CONFIG_FM2_ETH3 +#define CONFIG_SYS_FM2_ETH3_PHY_ADDR 0x1f +#define CONFIG_SYS_FM2_ETH3_MODE SGMII +#define CONFIG_FM2_ETH4 +#define CONFIG_SYS_FM2_ETH4_PHY_ADDR 0 +#define CONFIG_SYS_FM2_ETH4_MODE XAUI +#endif + +#define CONFIG_SYS_TBIPA_VALUE 8 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1 at DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH /opt/nfsroot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=p4080ds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p4080ds/p4080ds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" \ + "fman_ucode="MK_STR(CONFIG_SYS_FMAN_FW_ADDR_PHYS)"\0" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT + +#endif /* __CONFIG_H */ -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board 2010-07-15 22:15 ` [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board Kumar Gala @ 2010-07-21 16:31 ` Peter Tyser 2010-07-26 17:51 ` Kumar Gala 2010-07-26 18:12 ` [U-Boot] [PATCH v2] " Kumar Gala 0 siblings, 2 replies; 12+ messages in thread From: Peter Tyser @ 2010-07-21 16:31 UTC (permalink / raw) To: u-boot Hi Kumar, That's great to see official 4080 board support! I had a few comments below. I haven't dug into the 4080 much, so take them with a grain of salt. <snip> > +#ifdef CONFIG_PHYS_64BIT > + puts("36-bit Addressing\n"); > +#endif Any chance CONFIG_ENABLE_36BIT_PHYS could be defined without CONFIG_PHYS_64BIT, or vice-versa? Or any reason to not use CONFIG_ENABLE_36BIT_PHYS above? > + /* Display the actual SERDES reference clocks as configured by the > + * dip switches on the board. Note that the SWx registers could > + * technically be set to force the reference clocks to match the > + * values that the SERDES expects (or vice versa). For now, however, > + * we just display both values and hope the user notices when they > + * don't match. > + */ > + puts("SERDES Reference Clocks: "); > + sw = in_8(&PIXIS_SW(3)); > + printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100); > + printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125"); > + printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125"); Could you use serdes_clock_to_string() above? It'd make the values above a little less magical and be portable to other boards that don't use the PIXIS FPGA. > + > +#ifdef CONFIG_ECC_INIT_VIA_DDRCONTROLLER > + /* > + * Poll until memory is initialized. 512 Meg at 400MHz might hit this > + * 200 times or so. > + */ > + while ((ddr->sdram_cfg_2 & 16) != 0) { > + debug("sdram_cfg2 = 0x%08x\n", ddr->sdram_cfg_2); > + udelay(1000); > + } > + asm("sync; isync"); > + udelay(500); > + > + while ((ddr2->sdram_cfg_2 & 16) != 0) { > + debug("sdram_cfg2 = 0x%08x\n", ddr2->sdram_cfg_2); > + udelay(1000); > + } > + asm("sync; isync"); > + udelay(500); > +#endif Use in_be32()'s above? And change 16 to 0x10, or add a D_INIT define? > +phys_size_t initdram(int board_type) > +{ > + phys_size_t dram_size; > + > + puts("Initializing....\n"); > + > +#ifdef CONFIG_DDR_SPD > + dram_size = fsl_ddr_sdram(); > +#else > + dram_size = fixed_sdram(); > +#endif > + setup_ddr_tlbs(dram_size / 0x100000); > + > + puts(" DDR: "); > + return dram_size; > +} Should the puts("DDR:") be removed? With it I'd think the output would be "DRAM: DDR: (DDR3, 64-bit...)". Ie the DDR is a bit redundant and the spaces a bit excessive. > +#ifdef CONFIG_MP > +void board_lmb_reserve(struct lmb *lmb) > +{ > + cpu_mp_lmb_reserve(lmb); > +} > +#endif It'd be nice to move the board_lmb_reserve() somewhere common at some point since every board that has CONFIG_MP defined currently uses the same chunk of code. Or maybe remove board_lmb_reserve() and have its callees call cpu_mp_lmb_reserve(). > +#include <common.h> > +#include <asm/mmu.h> > + > +struct fsl_e_tlb_entry tlb_table[] = { > + /* TLB 0 - for temp stack in cache */ > + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, 0, > + 0, 0, BOOKE_PAGESZ_4K, 0), > + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, > + MAS3_SX|MAS3_SW|MAS3_SR, 0, > + 0, 0, BOOKE_PAGESZ_4K, 0), > + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, > + MAS3_SX|MAS3_SW|MAS3_SR, 0, > + 0, 0, BOOKE_PAGESZ_4K, 0), > + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, > + MAS3_SX|MAS3_SW|MAS3_SR, 0, > + 0, 0, BOOKE_PAGESZ_4K, 0), > + > + SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 0, BOOKE_PAGESZ_4K, 0), > + > + /* TLB 1 */ > + /* *I*** - Covers boot page */ > + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 0, BOOKE_PAGESZ_4K, 1), > + > + /* *I*G* - CCSRBAR */ > + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 1, BOOKE_PAGESZ_16M, 1), > + > + /* *I*G* - Flash, localbus */ > + /* This will be changed to *I*G* after relocation to RAM. */ > + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, > + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, > + 0, 2, BOOKE_PAGESZ_256M, 1), > + > + /* *I*G* - PCI */ > + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 3, BOOKE_PAGESZ_1G, 1), > + > + /* *I*G* - PCI */ > + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 4, BOOKE_PAGESZ_256M, 1), > + > + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 5, BOOKE_PAGESZ_256M, 1), > + > + /* *I*G* - PCI I/O */ > + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 6, BOOKE_PAGESZ_256K, 1), > + > + /* Bman/Qman */ > + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, 0, > + 0, 9, BOOKE_PAGESZ_1M, 1), > + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 10, BOOKE_PAGESZ_1M, 1), > + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, 0, > + 0, 11, BOOKE_PAGESZ_1M, 1), > + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 12, BOOKE_PAGESZ_1M, 1), > +#ifdef CONFIG_SYS_DCSRBAR_PHYS > + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, > + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, > + 0, 13, BOOKE_PAGESZ_4M, 1), > +#endif > +}; Lines > 80 chars. What happened to TLBs 7 and 8? It looks like you configure LAWs for the SRIO interfaces, but not TLBs? > +int num_tlb_entries = ARRAY_SIZE(tlb_table); > diff --git a/boards.cfg b/boards.cfg > index 5043833..8187b68 100644 > --- a/boards.cfg > +++ b/boards.cfg > @@ -340,6 +340,7 @@ MPC8540ADS powerpc mpc85xx mpc8540ads freescale > MPC8544DS powerpc mpc85xx mpc8544ds freescale > MPC8560ADS powerpc mpc85xx mpc8560ads freescale > MPC8568MDS powerpc mpc85xx mpc8568mds freescale > +P4080DS powerpc mpc85xx corenet_ds freescale > XPEDITE5200 powerpc mpc85xx xpedite5200 xes > XPEDITE5370 powerpc mpc85xx xpedite5370 xes > P1022DS powerpc mpc85xx p1022ds freescale How are these boards supposed to be sorted in general? It seems odd not to have the P1022DS and P4080DS next to each other. > + > +/* > + * P4080 DS board configuration file > + * > + */ Extra line above. > diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h <snip> > +/* > + * P4080 DS board configuration file > + * > + */ corenet_ds.h above? And extra line. What's the connection between the corenet_ds and P4080DS and their header files? I had assumed the corenet_ds.h file would contain somewhat generic corenet defines that could be shared between other corenet-based boards, but it seems to contain many board-specific defines. Best, Peter ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board 2010-07-21 16:31 ` Peter Tyser @ 2010-07-26 17:51 ` Kumar Gala 2010-07-26 18:12 ` [U-Boot] [PATCH v2] " Kumar Gala 1 sibling, 0 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-26 17:51 UTC (permalink / raw) To: u-boot On Jul 21, 2010, at 11:31 AM, Peter Tyser wrote: > Hi Kumar, > That's great to see official 4080 board support! I had a few comments > below. I haven't dug into the 4080 much, so take them with a grain of > salt. > > <snip> > >> +#ifdef CONFIG_PHYS_64BIT >> + puts("36-bit Addressing\n"); >> +#endif > > Any chance CONFIG_ENABLE_36BIT_PHYS could be defined without > CONFIG_PHYS_64BIT, or vice-versa? Or any reason to not use > CONFIG_ENABLE_36BIT_PHYS above? CONFIG_ENABLE_36BIT_PHYS is just to enable the capability on e500v2 cores. It probably should be renamed at this point. >> + /* Display the actual SERDES reference clocks as configured by the >> + * dip switches on the board. Note that the SWx registers could >> + * technically be set to force the reference clocks to match the >> + * values that the SERDES expects (or vice versa). For now, however, >> + * we just display both values and hope the user notices when they >> + * don't match. >> + */ >> + puts("SERDES Reference Clocks: "); >> + sw = in_8(&PIXIS_SW(3)); >> + printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100); >> + printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125"); >> + printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125"); > > Could you use serdes_clock_to_string() above? It'd make the values > above a little less magical and be portable to other boards that don't > use the PIXIS FPGA. Dont see the value to convert doubly that way. >> + >> +#ifdef CONFIG_ECC_INIT_VIA_DDRCONTROLLER >> + /* >> + * Poll until memory is initialized. 512 Meg at 400MHz might hit this >> + * 200 times or so. >> + */ >> + while ((ddr->sdram_cfg_2 & 16) != 0) { >> + debug("sdram_cfg2 = 0x%08x\n", ddr->sdram_cfg_2); >> + udelay(1000); >> + } >> + asm("sync; isync"); >> + udelay(500); >> + >> + while ((ddr2->sdram_cfg_2 & 16) != 0) { >> + debug("sdram_cfg2 = 0x%08x\n", ddr2->sdram_cfg_2); >> + udelay(1000); >> + } >> + asm("sync; isync"); >> + udelay(500); >> +#endif > > Use in_be32()'s above? And change 16 to 0x10, or add a D_INIT define? Going to drop the non-SPD code for now. >> +phys_size_t initdram(int board_type) >> +{ >> + phys_size_t dram_size; >> + >> + puts("Initializing....\n"); >> + >> +#ifdef CONFIG_DDR_SPD >> + dram_size = fsl_ddr_sdram(); >> +#else >> + dram_size = fixed_sdram(); >> +#endif >> + setup_ddr_tlbs(dram_size / 0x100000); >> + >> + puts(" DDR: "); >> + return dram_size; >> +} > > Should the puts("DDR:") be removed? With it I'd think the output would > be "DRAM: DDR: (DDR3, 64-bit...)". Ie the DDR is a bit redundant > and the spaces a bit excessive. This is consistent w/every other board port we have right now. >> +#ifdef CONFIG_MP >> +void board_lmb_reserve(struct lmb *lmb) >> +{ >> + cpu_mp_lmb_reserve(lmb); >> +} >> +#endif > > It'd be nice to move the board_lmb_reserve() somewhere common at some > point since every board that has CONFIG_MP defined currently uses the > same chunk of code. Or maybe remove board_lmb_reserve() and have its > callees call cpu_mp_lmb_reserve(). Going to leave this alone for now. Its an orthogonal cleanup to this board port. > >> +#include <common.h> >> +#include <asm/mmu.h> >> + >> +struct fsl_e_tlb_entry tlb_table[] = { >> + /* TLB 0 - for temp stack in cache */ >> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, 0, >> + 0, 0, BOOKE_PAGESZ_4K, 0), >> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, >> + MAS3_SX|MAS3_SW|MAS3_SR, 0, >> + 0, 0, BOOKE_PAGESZ_4K, 0), >> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, >> + MAS3_SX|MAS3_SW|MAS3_SR, 0, >> + 0, 0, BOOKE_PAGESZ_4K, 0), >> + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, >> + MAS3_SX|MAS3_SW|MAS3_SR, 0, >> + 0, 0, BOOKE_PAGESZ_4K, 0), >> + >> + SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 0, BOOKE_PAGESZ_4K, 0), >> + >> + /* TLB 1 */ >> + /* *I*** - Covers boot page */ >> + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 0, BOOKE_PAGESZ_4K, 1), >> + >> + /* *I*G* - CCSRBAR */ >> + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 1, BOOKE_PAGESZ_16M, 1), >> + >> + /* *I*G* - Flash, localbus */ >> + /* This will be changed to *I*G* after relocation to RAM. */ >> + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, >> + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, >> + 0, 2, BOOKE_PAGESZ_256M, 1), >> + >> + /* *I*G* - PCI */ >> + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 3, BOOKE_PAGESZ_1G, 1), >> + >> + /* *I*G* - PCI */ >> + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 4, BOOKE_PAGESZ_256M, 1), >> + >> + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 5, BOOKE_PAGESZ_256M, 1), >> + >> + /* *I*G* - PCI I/O */ >> + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 6, BOOKE_PAGESZ_256K, 1), >> + >> + /* Bman/Qman */ >> + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, 0, >> + 0, 9, BOOKE_PAGESZ_1M, 1), >> + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 10, BOOKE_PAGESZ_1M, 1), >> + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, 0, >> + 0, 11, BOOKE_PAGESZ_1M, 1), >> + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 12, BOOKE_PAGESZ_1M, 1), >> +#ifdef CONFIG_SYS_DCSRBAR_PHYS >> + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, >> + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, >> + 0, 13, BOOKE_PAGESZ_4M, 1), >> +#endif >> +}; > > Lines > 80 chars. What happened to TLBs 7 and 8? It looks like you > configure LAWs for the SRIO interfaces, but not TLBs? Correct, we dont ever access SRIO space in u-boot and dont have the VA address space left to map it anywhere. > >> +int num_tlb_entries = ARRAY_SIZE(tlb_table); >> diff --git a/boards.cfg b/boards.cfg >> index 5043833..8187b68 100644 >> --- a/boards.cfg >> +++ b/boards.cfg >> @@ -340,6 +340,7 @@ MPC8540ADS powerpc mpc85xx mpc8540ads freescale >> MPC8544DS powerpc mpc85xx mpc8544ds freescale >> MPC8560ADS powerpc mpc85xx mpc8560ads freescale >> MPC8568MDS powerpc mpc85xx mpc8568mds freescale >> +P4080DS powerpc mpc85xx corenet_ds freescale >> XPEDITE5200 powerpc mpc85xx xpedite5200 xes >> XPEDITE5370 powerpc mpc85xx xpedite5370 xes >> P1022DS powerpc mpc85xx p1022ds freescale > > How are these boards supposed to be sorted in general? It seems odd not > to have the P1022DS and P4080DS next to each other. Will fix that, should be sorted by name. I think P1022DS got out of order. > >> + >> +/* >> + * P4080 DS board configuration file >> + * >> + */ > > Extra line above. > >> diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h > > <snip> > >> +/* >> + * P4080 DS board configuration file >> + * >> + */ > > corenet_ds.h above? And extra line. What's the connection between the > corenet_ds and P4080DS and their header files? I had assumed the > corenet_ds.h file would contain somewhat generic corenet defines that > could be shared between other corenet-based boards, but it seems to > contain many board-specific defines. corenet_ds is for corenet based platform DS boards. This will include P3041 and P5020 DS boards in the future. Its not about corenet platforms which is a different direction. - k ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v2] powerpc/p4080: Add support for the P4080DS board 2010-07-21 16:31 ` Peter Tyser 2010-07-26 17:51 ` Kumar Gala @ 2010-07-26 18:12 ` Kumar Gala 2010-07-31 18:29 ` Kumar Gala 2010-08-03 22:28 ` Wolfgang Denk 1 sibling, 2 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-26 18:12 UTC (permalink / raw) To: u-boot Add support for the P4080DS board, with the following features: * 36-bit only * Boots from NOR flash * FMAN drivers NOT supported * SPD DDR initialization Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Ashish Kalra <Ashish.Kalra@freescale.com> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> --- * Dropped non-SPD ddr setup * cleaned up some whitespace issues MAKEALL | 1 + board/freescale/common/Makefile | 1 + board/freescale/corenet_ds/Makefile | 55 +++ board/freescale/corenet_ds/config.mk | 30 ++ board/freescale/corenet_ds/corenet_ds.c | 259 ++++++++++++ board/freescale/corenet_ds/ddr.c | 176 ++++++++ board/freescale/corenet_ds/law.c | 40 ++ board/freescale/corenet_ds/pci.c | 127 ++++++ board/freescale/corenet_ds/tlb.c | 112 +++++ boards.cfg | 1 + include/configs/P4080DS.h | 35 ++ include/configs/corenet_ds.h | 673 +++++++++++++++++++++++++++++++ 12 files changed, 1510 insertions(+), 0 deletions(-) create mode 100644 board/freescale/corenet_ds/Makefile create mode 100644 board/freescale/corenet_ds/config.mk create mode 100644 board/freescale/corenet_ds/corenet_ds.c create mode 100644 board/freescale/corenet_ds/ddr.c create mode 100644 board/freescale/corenet_ds/law.c create mode 100644 board/freescale/corenet_ds/pci.c create mode 100644 board/freescale/corenet_ds/tlb.c create mode 100644 include/configs/P4080DS.h create mode 100644 include/configs/corenet_ds.h diff --git a/MAKEALL b/MAKEALL index 2133559..b34ae33 100755 --- a/MAKEALL +++ b/MAKEALL @@ -428,6 +428,7 @@ LIST_85xx=" \ P2020RDB_NAND \ P2020RDB_SDCARD \ P2020RDB_SPIFLASH \ + P4080DS \ PM854 \ PM856 \ sbc8540 \ diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 2d48d7e..f93045f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o COBJS-$(CONFIG_P1022DS) += ics307_clk.o COBJS-$(CONFIG_P2020DS) += ics307_clk.o +COBJS-$(CONFIG_P4080DS) += ics307_clk.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile new file mode 100644 index 0000000..8aa7255 --- /dev/null +++ b/board/freescale/corenet_ds/Makefile @@ -0,0 +1,55 @@ +# +# Copyright 2007-2009 Freescale Semiconductor, Inc. +# (C) Copyright 2001-2006 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-$(CONFIG_DDR_SPD) += ddr.o +COBJS-$(CONFIG_PCI) += pci.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/corenet_ds/config.mk b/board/freescale/corenet_ds/config.mk new file mode 100644 index 0000000..72db24e --- /dev/null +++ b/board/freescale/corenet_ds/config.mk @@ -0,0 +1,30 @@ +# +# Copyright 2007-2009 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# P4080DS board +# +ifndef TEXT_BASE +TEXT_BASE = 0xeff80000 +endif + +RESET_VECTOR_ADDRESS = 0xeffffffc diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c new file mode 100644 index 0000000..3cdefb3 --- /dev/null +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -0,0 +1,259 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +extern void pci_of_setup(void *blob, bd_t *bd); + +#include "../common/ngpixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +void cpu_mp_lmb_reserve(struct lmb *lmb); + +int checkboard (void) +{ + u8 sw; + struct cpu_type *cpu = gd->cpu; + + printf("Board: %sDS, ", cpu->name); + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); + + sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); + sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank: %d\n", sw); + else if (sw == 0x8) + puts("Promjet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else + printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); + +#ifdef CONFIG_PHYS_64BIT + puts("36-bit Addressing\n"); +#endif + + /* Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES Reference Clocks: "); + sw = in_8(&PIXIS_SW(3)); + printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100); + printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125"); + printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125"); + + return 0; +} + +int board_early_init_f(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + /* + * P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3 + * disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce + * the noise introduced by these unterminated and unused clock pairs. + */ + setbits_be32(&gur->ddrclkdr, 0x001B001B); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ + 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ + + set_liodns(); + setup_portals(); + +#ifdef CONFIG_SRIO1 + if (is_serdes_configured(SRIO1)) { + set_next_law(CONFIG_SYS_RIO1_MEM_PHYS, LAW_SIZE_256M, + LAW_TRGT_IF_RIO_1); + } else { + printf (" SRIO1: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); /* disable */ +#endif + +#ifdef CONFIG_SRIO2 + if (is_serdes_configured(SRIO2)) { + set_next_law(CONFIG_SYS_RIO2_MEM_PHYS, LAW_SIZE_256M, + LAW_TRGT_IF_RIO_2); + } else { + printf (" SRIO2: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); /* disable */ +#endif + + return 0; +} + +static const char *serdes_clock_to_string(u32 clock) +{ + switch(clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + case SRDS_PLLCR0_RFCK_SEL_156_25: + return "156.25"; + default: + return "???"; + } +} + +#define NUM_SRDS_BANKS 3 + +int misc_init_r(void) +{ + serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 actual[NUM_SRDS_BANKS]; + unsigned int i; + u8 sw3; + + /* Warn if the expected SERDES reference clocks don't match the + * actual reference clocks. This needs to be done after calling + * p4080_erratum_serdes8(), since that function may modify the clocks. + */ + sw3 = in_8(&PIXIS_SW(3)); + actual[0] = (sw3 & 0x40) ? + SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100; + actual[1] = (sw3 & 0x20) ? + SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; + actual[2] = (sw3 & 0x10) ? + SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; + + for (i = 0; i < NUM_SRDS_BANKS; i++) { + u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; + if (expected != actual[i]) { + printf("Warning: SERDES bank %u expects reference clock" + " %sMHz, but actual is %sMHz\n", i + 1, + serdes_clock_to_string(expected), + serdes_clock_to_string(actual[i])); + } + } + + return 0; +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....\n"); + + dram_size = fsl_ddr_sdram(); + + setup_ddr_tlbs(dram_size / 0x100000); + + puts(" DDR: "); + return dram_size; +} + +#ifdef CONFIG_MP +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif + +void ft_srio_setup(void *blob) +{ +#ifdef CONFIG_SRIO1 + if (!is_serdes_configured(SRIO1)) { + fdt_del_node_and_alias(blob, "rio0"); + } +#else + fdt_del_node_and_alias(blob, "rio0"); +#endif +#ifdef CONFIG_SRIO2 + if (!is_serdes_configured(SRIO2)) { + fdt_del_node_and_alias(blob, "rio1"); + } +#else + fdt_del_node_and_alias(blob, "rio1"); +#endif +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + ft_srio_setup(blob); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); +} + +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c new file mode 100644 index 0000000..82b2b4f --- /dev/null +++ b/board/freescale/corenet_ds/ddr.c @@ -0,0 +1,176 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> + +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +static void get_spd(ddr3_spd_eeprom_t *spd, unsigned char i2c_address) +{ + int ret; + + ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr3_spd_eeprom_t)); + if (ret) { + debug("DDR: failed to read SPD from address %u\n", i2c_address); + memset(spd, 0, sizeof(ddr3_spd_eeprom_t)); + } +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_ddr_freq(0); +} + +void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (ctrl_num == 0 && i == 0) + i2c_address = SPD_EEPROM_ADDRESS1; + else if (ctrl_num == 1 && i == 0) + i2c_address = SPD_EEPROM_ADDRESS2; + + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} + +typedef struct { + u32 datarate_mhz_low; + u32 datarate_mhz_high; + u32 n_ranks; + u32 clk_adjust; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +} board_specific_parameters_t; + +/* ranges for parameters: + * wr_data_delay = 0-6 + * clk adjust = 0-8 + * cpo 2-0x1E (30) + */ + + +/* XXX: these values need to be checked for all interleaving modes. */ +/* XXX: No reliable dual-rank 800 MHz setting has been found. It may + * seem reliable, but errors will appear when memory intensive + * program is run. */ +/* XXX: Single rank@800 MHz is OK. */ +const board_specific_parameters_t board_specific_parameters[][20] = { + { + /* memory controller 0 */ + /* lo| hi| num| clk| cpo|wrdata|2T */ + /* mhz| mhz|ranks|adjst| | delay| */ + { 0, 333, 2, 6, 7, 3, 0}, + {334, 400, 2, 6, 9, 3, 0}, + {401, 549, 2, 6, 11, 3, 0}, + {550, 680, 2, 1, 10, 5, 0}, + {681, 850, 2, 1, 12, 5, 0}, + {851, 1050, 2, 1, 12, 5, 0}, + {1051, 1250, 2, 1, 15, 4, 0}, + {1251, 1350, 2, 1, 15, 4, 0}, + { 0, 333, 1, 6, 7, 3, 0}, + {334, 400, 1, 6, 9, 3, 0}, + {401, 549, 1, 6, 11, 3, 0}, + {550, 680, 1, 1, 10, 5, 0}, + {681, 850, 1, 1, 12, 5, 0} + }, + + { + /* memory controller 1 */ + /* lo| hi| num| clk| cpo|wrdata|2T */ + /* mhz| mhz|ranks|adjst| | delay| */ + { 0, 333, 2, 6, 7, 3, 0}, + {334, 400, 2, 6, 9, 3, 0}, + {401, 549, 2, 6, 11, 3, 0}, + {550, 680, 2, 1, 11, 6, 0}, + {681, 850, 2, 1, 13, 6, 0}, + {851, 1050, 2, 1, 13, 6, 0}, + {1051, 1250, 2, 1, 15, 4, 0}, + {1251, 1350, 2, 1, 15, 4, 0}, + { 0, 333, 1, 6, 7, 3, 0}, + {334, 400, 1, 6, 9, 3, 0}, + {401, 549, 1, 6, 11, 3, 0}, + {550, 680, 1, 1, 11, 6, 0}, + {681, 850, 1, 1, 13, 6, 0} + } +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const board_specific_parameters_t *pbsp = + &(board_specific_parameters[ctrl_num][0]); + u32 num_params = sizeof(board_specific_parameters[ctrl_num]) / + sizeof(board_specific_parameters[0][0]); + u32 i; + ulong ddr_freq; + + /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in + * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If + * there are two dimms in the controller, set odt_rd_cfg to 3 and + * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. + */ + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (i&1) { /* odd CS */ + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } else { /* even CS */ + if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) { + popts->cs_local_opts[i].odt_rd_cfg = 0; + popts->cs_local_opts[i].odt_wr_cfg = 1; + } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { + popts->cs_local_opts[i].odt_rd_cfg = 3; + popts->cs_local_opts[i].odt_wr_cfg = 3; + } + } + } + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + for (i = 0; i < num_params; i++) { + if (ddr_freq >= pbsp->datarate_mhz_low && + ddr_freq <= pbsp->datarate_mhz_high && + pdimm->n_ranks == pbsp->n_ranks) { + popts->cpo_override = 0xff; /* force auto CPO calibration */ + popts->write_data_delay = 2; + popts->clk_adjust = 5; /* Force value to be 5/8 clock cycle */ + popts->twoT_en = pbsp->force_2T; + } + pbsp++; + } + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xa; + popts->wrlvl_start = 0x7; + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 1; + popts->rtt_override_value = DDR3_RTT_120_OHM; + popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ + + /* Enable ZQ calibration */ + popts->zq_en = 1; +} diff --git a/board/freescale/corenet_ds/law.c b/board/freescale/corenet_ds/law.c new file mode 100644 index 0000000..43b4b97 --- /dev/null +++ b/board/freescale/corenet_ds/law.c @@ -0,0 +1,40 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd at denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN), + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN), + SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/corenet_ds/pci.c b/board/freescale/corenet_ds/pci.c new file mode 100644 index 0000000..2994e36 --- /dev/null +++ b/board/freescale/corenet_ds/pci.c @@ -0,0 +1,127 @@ +/* + * Copyright 2007-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +#ifdef CONFIG_PCIE1 +static struct pci_controller pcie1_hose; +#endif + +#ifdef CONFIG_PCIE2 +static struct pci_controller pcie2_hose; +#endif + +#ifdef CONFIG_PCIE3 +static struct pci_controller pcie3_hose; +#endif + +void pci_init_board(void) +{ + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct fsl_pci_info pci_info[3]; + u32 devdisr; + int first_free_busno = 0; + int num = 0; + + int pcie_ep, pcie_configured; + + devdisr = in_be32(&gur->devdisr); + + debug (" pci_init_board: devdisr=%x\n", devdisr); + +#ifdef CONFIG_PCIE1 + pcie_configured = is_serdes_configured(PCIE1); + + if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE1)) { + set_next_law(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, + LAW_TRGT_IF_PCIE_1); + set_next_law(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, + LAW_TRGT_IF_PCIE_1); + SET_STD_PCIE_INFO(pci_info[num], 1); + pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); + printf(" PCIE1 connected to Slot 1 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); + } else { + printf (" PCIE1: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE1); /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + pcie_configured = is_serdes_configured(PCIE2); + + if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE2)) { + set_next_law(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, + LAW_TRGT_IF_PCIE_2); + set_next_law(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, + LAW_TRGT_IF_PCIE_2); + SET_STD_PCIE_INFO(pci_info[num], 2); + pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); + printf(" PCIE2 connected to Slot 3 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); + } else { + printf (" PCIE2: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE2); /* disable */ +#endif + +#ifdef CONFIG_PCIE3 + pcie_configured = is_serdes_configured(PCIE3); + + if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE3)) { + set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, + LAW_TRGT_IF_PCIE_3); + set_next_law(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, + LAW_TRGT_IF_PCIE_3); + SET_STD_PCIE_INFO(pci_info[num], 3); + pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); + printf(" PCIE3 connected to Slot 2 as %s (base addr %lx)\n", + pcie_ep ? "End Point" : "Root Complex", + pci_info[num].regs); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); + } else { + printf (" PCIE3: disabled\n"); + } +#else + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE3); /* disable */ +#endif +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c new file mode 100644 index 0000000..1ae0416 --- /dev/null +++ b/board/freescale/corenet_ds/tlb.c @@ -0,0 +1,112 @@ +/* + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd at denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + SET_TLB_ENTRY(0, PIXIS_BASE, PIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_1M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_1M, 1), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_4M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/boards.cfg b/boards.cfg index b82f530..a70f541 100644 --- a/boards.cfg +++ b/boards.cfg @@ -343,6 +343,7 @@ MPC8540ADS powerpc mpc85xx mpc8540ads freescale MPC8544DS powerpc mpc85xx mpc8544ds freescale MPC8560ADS powerpc mpc85xx mpc8560ads freescale MPC8568MDS powerpc mpc85xx mpc8568mds freescale +P4080DS powerpc mpc85xx corenet_ds freescale XPEDITE5200 powerpc mpc85xx xpedite5200 xes XPEDITE5370 powerpc mpc85xx xpedite5370 xes P1022DS powerpc mpc85xx p1022ds freescale diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h new file mode 100644 index 0000000..43c9a7f --- /dev/null +++ b/include/configs/P4080DS.h @@ -0,0 +1,35 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * P4080 DS board configuration file + */ +#define CONFIG_P4080DS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_P4080 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_NUM_DDR_CONTROLLERS 2 + +#define CONFIG_SYS_P4080_ERRATUM_CPU22 +#define CONFIG_SYS_P4080_ERRATUM_SERDES8 + +#include "corenet_ds.h" diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h new file mode 100644 index 0000000..5f5a175 --- /dev/null +++ b/include/configs/corenet_ds.h @@ -0,0 +1,673 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Corenet DS style board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "../board/freescale/common/ics307_clk.h" + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_MP /* support multiple processors */ + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ +#define CONFIG_SYS_HAS_SERDES /* has SERDES */ + +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ +#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ +//#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xfe000000 /* relocated CCSRBAR */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_CCSRBAR_PHYS 0xffe000000ull /* physical addr of CCSRBAR */ +#else +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ +#endif +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 + +#ifdef CONFIG_DDR_SPD +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#else +#define CONFIG_SYS_SDRAM_SIZE 4096 + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f +#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f +#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 +#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202 +#define CONFIG_SYS_DDR_TIMING_3 0x01031000 +#define CONFIG_SYS_DDR_TIMING_0 0x55440804 +#define CONFIG_SYS_DDR_TIMING_1 0x74713a66 +#define CONFIG_SYS_DDR_TIMING_2 0x0fb8911b +#define CONFIG_SYS_DDR_MODE_1 0x00421850 +#define CONFIG_SYS_DDR_MODE_2 0x00100000 +#define CONFIG_SYS_DDR_MODE_CTRL 0x00000000 +#define CONFIG_SYS_DDR_INTERVAL 0x10400100 +#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef +#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 +#define CONFIG_SYS_DDR_TIMING_4 0x00220001 +#define CONFIG_SYS_DDR_TIMING_5 0x03401500 +#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 +#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8655a608 +#define CONFIG_SYS_DDR_CONTROL 0xc7048000 +#define CONFIG_SYS_DDR_CONTROL2 0x24400011 +#define CONFIG_SYS_DDR_CDR1 0x00000000 +#define CONFIG_SYS_DDR_CDR2 0x00000000 +#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d +#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 +#define CONFIG_SYS_DDR_SBE 0x00010000 +#define CONFIG_SYS_DDR_DEBUG_18 0x40100400 + +#define CONFIG_SYS_DDR2_CS0_BNDS 0x008000bf +#define CONFIG_SYS_DDR2_CS1_BNDS 0x00C000ff +#define CONFIG_SYS_DDR2_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG +#define CONFIG_SYS_DDR2_CS1_CONFIG CONFIG_SYS_DDR_CS1_CONFIG +#define CONFIG_SYS_DDR2_TIMING_3 CONFIG_SYS_DDR_TIMING_3 +#define CONFIG_SYS_DDR2_TIMING_0 CONFIG_SYS_DDR_TIMING_0 +#define CONFIG_SYS_DDR2_TIMING_1 CONFIG_SYS_DDR_TIMING_1 +#define CONFIG_SYS_DDR2_TIMING_2 CONFIG_SYS_DDR_TIMING_2 +#define CONFIG_SYS_DDR2_MODE_1 CONFIG_SYS_DDR_MODE_1 +#define CONFIG_SYS_DDR2_MODE_2 CONFIG_SYS_DDR_MODE_2 +#define CONFIG_SYS_DDR2_MODE_CTRL CONFIG_SYS_DDR_MODE_CTRL +#define CONFIG_SYS_DDR2_INTERVAL CONFIG_SYS_DDR_INTERVAL +#define CONFIG_SYS_DDR2_DATA_INIT CONFIG_SYS_DDR_DATA_INIT +#define CONFIG_SYS_DDR2_CLK_CTRL CONFIG_SYS_DDR_CLK_CTRL +#define CONFIG_SYS_DDR2_TIMING_4 CONFIG_SYS_DDR_TIMING_4 +#define CONFIG_SYS_DDR2_TIMING_5 CONFIG_SYS_DDR_TIMING_5 +#define CONFIG_SYS_DDR2_ZQ_CNTL CONFIG_SYS_DDR_ZQ_CNTL +#define CONFIG_SYS_DDR2_WRLVL_CNTL CONFIG_SYS_DDR_WRLVL_CNTL +#define CONFIG_SYS_DDR2_CONTROL CONFIG_SYS_DDR_CONTROL +#define CONFIG_SYS_DDR2_CONTROL2 CONFIG_SYS_DDR_CONTROL2 +#define CONFIG_SYS_DDR2_CDR1 CONFIG_SYS_DDR_CDR1 +#define CONFIG_SYS_DDR2_CDR2 CONFIG_SYS_DDR_CDR2 +#define CONFIG_SYS_DDR2_ERR_INT_EN CONFIG_SYS_DDR_ERR_INT_EN +#define CONFIG_SYS_DDR2_ERR_DIS CONFIG_SYS_DDR_ERR_DIS +#define CONFIG_SYS_DDR2_SBE CONFIG_SYS_DDR_SBE +#define CONFIG_SYS_DDR2_DEBUG_18 CONFIG_SYS_DDR_DEBUG_18 + +#endif + +/* + * Local Bus Definitions + */ + +/* Set the local bus clock 1/8 of platform clock */ +#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 + +#define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull +#else +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif + +#define CONFIG_SYS_BR0_PRELIM \ + (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \ + BR_PS_16 | BR_V) +#define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ + | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) + +#define CONFIG_SYS_BR1_PRELIM \ + (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) +#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 + +#define CONFIG_FSL_NGPIXIS /* use common ngPIXIS code */ +#define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ +#ifdef CONFIG_PHYS_64BIT +#define PIXIS_BASE_PHYS 0xfffdf0000ull +#else +#define PIXIS_BASE_PHYS PIXIS_BASE +#endif + +#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) +#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ + +#define PIXIS_LBMAP_SWITCH 7 +#define PIXIS_LBMAP_MASK 0xf0 +#define PIXIS_LBMAP_SHIFT 4 +#define PIXIS_LBMAP_ALTBANK 0x40 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif +#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x118000 +#define CONFIG_SYS_I2C2_OFFSET 0x118100 + +/* + * RapidIO + */ +#define CONFIG_SYS_RIO1_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_RIO1_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_RIO1_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_RIO1_MEM_SIZE 0x10000000 /* 256M */ + +#define CONFIG_SYS_RIO2_MEM_VIRT 0xb0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_RIO2_MEM_PHYS 0xc30000000ull +#else +#define CONFIG_SYS_RIO2_MEM_PHYS 0xb0000000 +#endif +#define CONFIG_SYS_RIO2_MEM_SIZE 0x10000000 /* 256M */ + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 +#endif +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xe0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 +#endif +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 10 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#else +#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#endif +#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 10 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull +#else +#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#endif +#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +/* Default address of microcode for the Linux Fman driver */ +#define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FMAN_FW_ADDR_PHYS 0xFEF000000ULL +#else +#define CONFIG_SYS_FMAN_FW_ADDR_PHYS CONFIG_SYS_FMAN_FW_ADDR +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#endif + +#ifdef CONFIG_PCI + +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT + +/* video */ +#define CONFIG_VIDEO + +#ifdef CONFIG_VIDEO +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET +#endif + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#ifndef CONFIG_PCI_PNP +#define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS +#define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BUS +#define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_FM1_ETH0 +#define CONFIG_SYS_FM1_ETH0_PHY_ADDR 0x1c +#define CONFIG_SYS_FM1_ETH0_MODE SGMII +#define CONFIG_FM1_ETH1 +#define CONFIG_SYS_FM1_ETH1_PHY_ADDR 0x1d +#define CONFIG_SYS_FM1_ETH1_MODE SGMII +#define CONFIG_FM1_ETH2 +#define CONFIG_SYS_FM1_ETH2_PHY_ADDR 0x1e +#define CONFIG_SYS_FM1_ETH2_MODE SGMII +#define CONFIG_FM1_ETH3 +#define CONFIG_SYS_FM1_ETH3_PHY_ADDR 0x1f +#define CONFIG_SYS_FM1_ETH3_MODE SGMII +#define CONFIG_FM1_ETH4 +#define CONFIG_SYS_FM1_ETH4_PHY_ADDR 4 +#define CONFIG_SYS_FM1_ETH4_MODE XAUI + +#if (CONFIG_SYS_NUM_FMAN == 2) +#define CONFIG_FM2_ETH0 +#define CONFIG_SYS_FM2_ETH0_PHY_ADDR 0x1c +#define CONFIG_SYS_FM2_ETH0_MODE SGMII +#define CONFIG_FM2_ETH1 +#define CONFIG_SYS_FM2_ETH1_PHY_ADDR 0x1d +#define CONFIG_SYS_FM2_ETH1_MODE SGMII +#define CONFIG_FM2_ETH2 +#define CONFIG_SYS_FM2_ETH2_PHY_ADDR 0x1e +#define CONFIG_SYS_FM2_ETH2_MODE SGMII +#define CONFIG_FM2_ETH3 +#define CONFIG_SYS_FM2_ETH3_PHY_ADDR 0x1f +#define CONFIG_SYS_FM2_ETH3_MODE SGMII +#define CONFIG_FM2_ETH4 +#define CONFIG_SYS_FM2_ETH4_PHY_ADDR 0 +#define CONFIG_SYS_FM2_ETH4_MODE XAUI +#endif + +#define CONFIG_SYS_TBIPA_VALUE 8 +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1 at DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH /opt/nfsroot +#define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=p4080ds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=p4080ds/p4080ds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" \ + "fman_ucode="MK_STR(CONFIG_SYS_FMAN_FW_ADDR_PHYS)"\0" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_HDBOOT + +#endif /* __CONFIG_H */ -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v2] powerpc/p4080: Add support for the P4080DS board 2010-07-26 18:12 ` [U-Boot] [PATCH v2] " Kumar Gala @ 2010-07-31 18:29 ` Kumar Gala 2010-08-03 22:28 ` Wolfgang Denk 1 sibling, 0 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-31 18:29 UTC (permalink / raw) To: u-boot On Jul 26, 2010, at 1:12 PM, Kumar Gala wrote: > Add support for the P4080DS board, with the following features: > > * 36-bit only > * Boots from NOR flash > * FMAN drivers NOT supported > * SPD DDR initialization > > Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> > Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> > Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> > Signed-off-by: Ashish Kalra <Ashish.Kalra@freescale.com> > Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> > Signed-off-by: Dave Liu <daveliu@freescale.com> > Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> > Signed-off-by: Scott Wood <scottwood@freescale.com> > Signed-off-by: Kim Phillips <kim.phillips@freescale.com> > Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> > Signed-off-by: Timur Tabi <timur@freescale.com> > Signed-off-by: Andy Fleming <afleming@freescale.com> > Signed-off-by: York Sun <yorksun@freescale.com> > Signed-off-by: Kumar Gala <galak@kernel.crashing.org> > --- > * Dropped non-SPD ddr setup > * cleaned up some whitespace issues > > MAKEALL | 1 + > board/freescale/common/Makefile | 1 + > board/freescale/corenet_ds/Makefile | 55 +++ > board/freescale/corenet_ds/config.mk | 30 ++ > board/freescale/corenet_ds/corenet_ds.c | 259 ++++++++++++ > board/freescale/corenet_ds/ddr.c | 176 ++++++++ > board/freescale/corenet_ds/law.c | 40 ++ > board/freescale/corenet_ds/pci.c | 127 ++++++ > board/freescale/corenet_ds/tlb.c | 112 +++++ > boards.cfg | 1 + > include/configs/P4080DS.h | 35 ++ > include/configs/corenet_ds.h | 673 +++++++++++++++++++++++++++++++ > 12 files changed, 1510 insertions(+), 0 deletions(-) > create mode 100644 board/freescale/corenet_ds/Makefile > create mode 100644 board/freescale/corenet_ds/config.mk > create mode 100644 board/freescale/corenet_ds/corenet_ds.c > create mode 100644 board/freescale/corenet_ds/ddr.c > create mode 100644 board/freescale/corenet_ds/law.c > create mode 100644 board/freescale/corenet_ds/pci.c > create mode 100644 board/freescale/corenet_ds/tlb.c > create mode 100644 include/configs/P4080DS.h > create mode 100644 include/configs/corenet_ds.h applied to 85xx - k ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH v2] powerpc/p4080: Add support for the P4080DS board 2010-07-26 18:12 ` [U-Boot] [PATCH v2] " Kumar Gala 2010-07-31 18:29 ` Kumar Gala @ 2010-08-03 22:28 ` Wolfgang Denk 1 sibling, 0 replies; 12+ messages in thread From: Wolfgang Denk @ 2010-08-03 22:28 UTC (permalink / raw) To: u-boot Dear Kumar Gala, In message <1280167927-29160-1-git-send-email-galak@kernel.crashing.org> you wrote: > Add support for the P4080DS board, with the following features: > > * 36-bit only > * Boots from NOR flash > * FMAN drivers NOT supported > * SPD DDR initialization > > Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> > Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> > Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> > Signed-off-by: Ashish Kalra <Ashish.Kalra@freescale.com> > Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> > Signed-off-by: Dave Liu <daveliu@freescale.com> > Signed-off-by: Lan Chunhe-B25806 <b25806@freescale.com> > Signed-off-by: Scott Wood <scottwood@freescale.com> > Signed-off-by: Kim Phillips <kim.phillips@freescale.com> > Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> > Signed-off-by: Timur Tabi <timur@freescale.com> > Signed-off-by: Andy Fleming <afleming@freescale.com> > Signed-off-by: York Sun <yorksun@freescale.com> > Signed-off-by: Kumar Gala <galak@kernel.crashing.org> > --- > * Dropped non-SPD ddr setup > * cleaned up some whitespace issues > > MAKEALL | 1 + > board/freescale/common/Makefile | 1 + > board/freescale/corenet_ds/Makefile | 55 +++ > board/freescale/corenet_ds/config.mk | 30 ++ > board/freescale/corenet_ds/corenet_ds.c | 259 ++++++++++++ > board/freescale/corenet_ds/ddr.c | 176 ++++++++ > board/freescale/corenet_ds/law.c | 40 ++ > board/freescale/corenet_ds/pci.c | 127 ++++++ > board/freescale/corenet_ds/tlb.c | 112 +++++ > boards.cfg | 1 + > include/configs/P4080DS.h | 35 ++ > include/configs/corenet_ds.h | 673 +++++++++++++++++++++++++++++++ > 12 files changed, 1510 insertions(+), 0 deletions(-) > create mode 100644 board/freescale/corenet_ds/Makefile > create mode 100644 board/freescale/corenet_ds/config.mk > create mode 100644 board/freescale/corenet_ds/corenet_ds.c > create mode 100644 board/freescale/corenet_ds/ddr.c > create mode 100644 board/freescale/corenet_ds/law.c > create mode 100644 board/freescale/corenet_ds/pci.c > create mode 100644 board/freescale/corenet_ds/tlb.c > create mode 100644 include/configs/P4080DS.h > create mode 100644 include/configs/corenet_ds.h Entry in MAINTAINERS missing. Please provide incremental patch. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Bureaucracy is the enemy of innovation." - Mark Shepherd, former President and CEO of Texas Instruments ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 2010-07-15 22:15 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board Kumar Gala @ 2010-07-26 18:13 ` Kumar Gala 1 sibling, 0 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-26 18:13 UTC (permalink / raw) To: u-boot On Jul 15, 2010, at 5:15 PM, Kumar Gala wrote: > Signed-off-by: Kumar Gala <galak@kernel.crashing.org> > --- > arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 +++- > arch/powerpc/cpu/mpc85xx/cpu_init.c | 7 +++++++ > arch/powerpc/cpu/mpc85xx/release.S | 6 ++++++ > arch/powerpc/include/asm/processor.h | 1 + > 4 files changed, 17 insertions(+), 1 deletions(-) applied to 85xx - k ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 2010-07-15 22:15 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala @ 2010-07-26 18:13 ` Kumar Gala 1 sibling, 0 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-26 18:13 UTC (permalink / raw) To: u-boot On Jul 15, 2010, at 5:15 PM, Kumar Gala wrote: > Signed-off-by: Scott Wood <scottwood@freescale.com> > Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> > Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> > Signed-off-by: Kumar Gala <galak@kernel.crashing.org> > --- > arch/powerpc/cpu/mpc85xx/cmd_errata.c | 4 + > arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 283 +++++++++++++++++++++++++ > arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 4 + > arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 4 + > 4 files changed, 295 insertions(+), 0 deletions(-) applied to 85xx - k ^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES 2010-07-15 22:15 [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala @ 2010-07-26 18:13 ` Kumar Gala 1 sibling, 0 replies; 12+ messages in thread From: Kumar Gala @ 2010-07-26 18:13 UTC (permalink / raw) To: u-boot On Jul 15, 2010, at 5:15 PM, Kumar Gala wrote: > Add support for initializing the SERDES blocks on CoreNet style QoriQ > devices and the p4080 specific SERDES tables to know which actual > componetns are enabled. > > Additionally, split out the Frame Manger (FMAN) into its specific ethernet > ports instead of gross level of the full FMAN. > > Signed-off-by: Li Yang <leoli@freescale.com> > Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> > Signed-off-by: Kumar Gala <galak@kernel.crashing.org> > --- > arch/powerpc/cpu/mpc85xx/Makefile | 2 + > arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 212 +++++++++++++++++++++++++ > arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h | 40 +++++ > arch/powerpc/cpu/mpc85xx/p4080_serdes.c | 94 +++++++++++ > arch/powerpc/include/asm/fsl_serdes.h | 11 +- > 5 files changed, 357 insertions(+), 2 deletions(-) > create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c > create mode 100644 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h > create mode 100644 arch/powerpc/cpu/mpc85xx/p4080_serdes.c applied to 85xx - k ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2010-08-03 22:28 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-07-15 22:15 [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala 2010-07-15 22:15 ` [U-Boot] [PATCH 4/4] powerpc/p4080: Add support for the P4080DS board Kumar Gala 2010-07-21 16:31 ` Peter Tyser 2010-07-26 17:51 ` Kumar Gala 2010-07-26 18:12 ` [U-Boot] [PATCH v2] " Kumar Gala 2010-07-31 18:29 ` Kumar Gala 2010-08-03 22:28 ` Wolfgang Denk 2010-07-26 18:13 ` [U-Boot] [PATCH 3/4] powerpc/p4080: Add workaround for erratum CPU22 Kumar Gala 2010-07-26 18:13 ` [U-Boot] [PATCH 2/4] powerpc/p4080: Add workaround for errata SERDES8 Kumar Gala 2010-07-26 18:13 ` [U-Boot] [PATCH 1/4] powerpc/p4080: Add support for initializing SERDES Kumar Gala
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox