From: Steve Sakoman <steve@sakoman.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ARMV7: Fix pad mux for Panda LEDs
Date: Wed, 08 Sep 2010 08:48:11 -0700 [thread overview]
Message-ID: <1283960891.4254.121.camel@quadra> (raw)
From: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
Correctly set PAD1_FREF_CLK4_REQ and PAD0_FREF_CLK4_OUT to enable and
activate both LEDs while setting pad mux.
Since this increases the line length, this patch also adjusts the white
space in this section of code to align the pad mux signal description
comments.
Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
---
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
index 8f6a6b1..877ae5f 100644
--- a/board/ti/panda/panda.h
+++ b/board/ti/panda/panda.h
@@ -237,28 +237,28 @@ const struct pad_conf_entry core_padconf_array[] = {
};
const struct pad_conf_entry wkup_padconf_array[] = {
- {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
- {PAD1_SIM_CLK, (M0)}, /* sim_clk */
- {PAD0_SIM_RESET, (M0)}, /* sim_reset */
- {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
- {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
- {PAD1_FREF_XTAL_IN, (M0)}, /* # */
- {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
- {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
- {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
- {PAD0_FREF_CLK4_OUT, (M0)}, /* # */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
- {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
- {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+ {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
+ {PAD1_SIM_CLK, (M0)}, /* sim_clk */
+ {PAD0_SIM_RESET, (M0)}, /* sim_reset */
+ {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
+ {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
+ {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+ {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+ {PAD1_FREF_XTAL_IN, (M0)}, /* # */
+ {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
+ {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
+ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
+ {PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
+ {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
+ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
+ {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
+ {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
};
#endif
reply other threads:[~2010-09-08 15:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283960891.4254.121.camel@quadra \
--to=steve@sakoman.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox