From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/26 v2][NEXT] arm: get rid of bi_env
Date: Fri, 17 Sep 2010 13:10:28 +0200 [thread overview]
Message-ID: <1284721853-8298-2-git-send-email-hs@denx.de> (raw)
In-Reply-To: <1284721853-8298-1-git-send-email-hs@denx.de>
bi_env is nowhere used, so delete it!
Portions of this work were supported by funding from
the CE Linux Forum.
Signed-off-by: Heiko Schocher <hs@denx.de>
similar patch posted from Dirk Behme Tue Jul 27 18:36:09 CEST 2010
http://lists.denx.de/pipermail/u-boot/2010-July/074542.html
so this patch maybe obsolete
---
arch/arm/include/asm/u-boot.h | 4 ----
arch/avr32/include/asm/u-boot.h | 1 -
arch/i386/include/asm/u-boot.h | 4 ----
arch/mips/include/asm/u-boot.h | 2 --
common/cmd_bdinfo.c | 1 -
5 files changed, 0 insertions(+), 12 deletions(-)
diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h
index cfd5a9b..ed33327 100644
--- a/arch/arm/include/asm/u-boot.h
+++ b/arch/arm/include/asm/u-boot.h
@@ -39,7 +39,6 @@
typedef struct bd_info {
int bi_baudrate; /* serial console baudrate */
unsigned long bi_ip_addr; /* IP Address */
- struct environment_s *bi_env;
ulong bi_arch_number; /* unique id for this board */
ulong bi_boot_params; /* where this board expects params */
struct /* RAM configuration */
@@ -49,7 +48,4 @@ typedef struct bd_info {
} bi_dram[CONFIG_NR_DRAM_BANKS];
} bd_t;
-#define bi_env_data bi_env->data
-#define bi_env_crc bi_env->crc
-
#endif /* _U_BOOT_H_ */
diff --git a/arch/avr32/include/asm/u-boot.h b/arch/avr32/include/asm/u-boot.h
index 7e4001f..8acd056 100644
--- a/arch/avr32/include/asm/u-boot.h
+++ b/arch/avr32/include/asm/u-boot.h
@@ -26,7 +26,6 @@ typedef struct bd_info {
unsigned long bi_baudrate;
unsigned long bi_ip_addr;
unsigned char bi_phy_id[4];
- struct environment_s *bi_env;
unsigned long bi_board_number;
void *bi_boot_params;
struct {
diff --git a/arch/i386/include/asm/u-boot.h b/arch/i386/include/asm/u-boot.h
index 9a1eec0..a43b3aa 100644
--- a/arch/i386/include/asm/u-boot.h
+++ b/arch/i386/include/asm/u-boot.h
@@ -51,7 +51,6 @@ typedef struct bd_info {
unsigned long bi_busfreq; /* Bus Freq, in MHz */
unsigned int bi_baudrate; /* Console Baudrate */
unsigned long bi_boot_params; /* where this board expects params */
- struct environment_s *bi_env;
struct /* RAM configuration */
{
ulong start;
@@ -59,7 +58,4 @@ typedef struct bd_info {
}bi_dram[CONFIG_NR_DRAM_BANKS];
} bd_t;
-#define bi_env_data bi_env->data
-#define bi_env_crc bi_env->crc
-
#endif /* _U_BOOT_H_ */
diff --git a/arch/mips/include/asm/u-boot.h b/arch/mips/include/asm/u-boot.h
index d9c14ca..e839ca1 100644
--- a/arch/mips/include/asm/u-boot.h
+++ b/arch/mips/include/asm/u-boot.h
@@ -42,7 +42,5 @@ typedef struct bd_info {
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
} bd_t;
-#define bi_env_data bi_env->data
-#define bi_env_crc bi_env->crc
#endif /* _U_BOOT_H_ */
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index d43867f..2730fa9 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -330,7 +330,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
bd_t *bd = gd->bd;
print_num ("arch_number", bd->bi_arch_number);
- print_num ("env_t", (ulong)bd->bi_env);
print_num ("boot_params", (ulong)bd->bi_boot_params);
for (i=0; i<CONFIG_NR_DRAM_BANKS; ++i) {
--
1.6.2.5
next prev parent reply other threads:[~2010-09-17 11:10 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-11 18:15 [U-Boot] [PATCH 00/26] arm: add full relocation / cache support Heiko Schocher
2010-08-11 20:00 ` Ben Gardiner
2010-08-11 20:36 ` Ben Gardiner
2010-08-11 20:01 ` Wolfgang Denk
2010-08-12 5:34 ` Heiko Schocher
2010-08-12 20:49 ` Magnus Lilja
2010-08-13 10:01 ` Wolfgang Denk
2010-08-12 12:50 ` Shinya Kuribayashi
2010-08-12 12:55 ` Shinya Kuribayashi
2010-08-12 20:19 ` Wolfgang Denk
2010-08-12 20:17 ` Wolfgang Denk
2010-08-13 14:36 ` Shinya Kuribayashi
2010-09-17 11:10 ` [U-Boot] [PATCH 00/26 v2][NEXT] " Heiko Schocher
2010-09-17 11:10 ` Heiko Schocher [this message]
2010-09-17 11:10 ` [U-Boot] [PATCH 02/26 v2][NEXT] ARM: cp15: setup mmu and enable dcache Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 03/26 v2][NEXT] ARM (ARM926ejs): add data cache support, tested on magnesium and tx25 board Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 04/26 v2][NEXT] ARM V7 (OMAP): add data cache support, test on Beagle board Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 05/26 v2][NEXT] ARM (ARM11): add data cache support, test on Qong board Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 06/26 v2][NEXT] relocation: fixup cmdtable Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 07/26 v2][NEXT] common: move TOTAL_MALLOC_LEN to include/common.h Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 08/26 v2][NEXT] i2c: fix command usage help Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 09/26 v2][NEXT] disk/part.c: fix relocation fixup Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 10/26 v2][NEXT] i2c, omap24xx: set bus_initialized only after relocation Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 11/26 v2][NEXT] nand_boot_fsl_nfc.c: make "nfc" a "static const" pointer Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 12/26 v2][NEXT] ARM: add relocation support Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 13/26 v2][NEXT] ARM: implement relocation for ARM11 Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 14/26 v2][NEXT] ARM: implement relocation for ARM V7 (OMAP) Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 15/26 v2][NEXT] ARM: implement relocation for ARM926 Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 16/26 v2][NEXT] ARM: implement relocation for ARM920 Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 17/26 v2][NEXT] ARM: implement relocation for ARM925 Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 18/26 v2][NEXT] ARM: implement relocation for ARM946 Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 19/26 v2][NEXT] ARM: implement relocation for pxa Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 20/26 v2][NEXT] ARM: implement relocation for ixp Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 21/26 v2][NEXT] ARM: implement relocation for sa1100 Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 22/26 v2][NEXT] ARM: implement relocation for s3c44b0 Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 23/26 v2][NEXT] ARM: implement relocation for lh7a40x Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 24/26 v2][NEXT] ARM: implement relocation for arm_intcm Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 25/26 v2][NEXT] ARM: implement relocation for arm720t Heiko Schocher
2010-09-17 11:10 ` [U-Boot] [PATCH 26/26 v2][NEXT] ARM: implement relocation for arm1176 Heiko Schocher
2010-09-22 9:32 ` [U-Boot] [PATCH 15/26 v2][NEXT] ARM: implement relocation for ARM926 Albert ARIBAUD
2010-09-17 21:40 ` [U-Boot] [PATCH 14/26 v2][NEXT] ARM: implement relocation for ARM V7 (OMAP) John Rigby
2010-09-17 22:02 ` Wolfgang Denk
2010-09-19 1:21 ` John Rigby
2010-09-19 6:07 ` Heiko Schocher
2010-09-19 6:59 ` Wolfgang Denk
2010-09-19 6:58 ` Wolfgang Denk
2010-09-17 13:07 ` [U-Boot] [PATCH 12/26 v2][NEXT] ARM: add relocation support Albert ARIBAUD
2010-09-17 14:54 ` Wolfgang Denk
2010-09-17 16:44 ` Albert ARIBAUD
2010-09-17 19:22 ` Wolfgang Denk
2010-09-17 22:58 ` Albert ARIBAUD
2010-09-18 22:35 ` Albert ARIBAUD
2010-09-18 22:58 ` Wolfgang Denk
2010-09-19 6:04 ` Heiko Schocher
2010-09-19 7:17 ` Albert ARIBAUD
2010-09-19 8:28 ` Albert ARIBAUD
2010-09-19 11:17 ` Wolfgang Denk
2010-09-19 11:56 ` Heiko Schocher
2010-09-18 23:19 ` [U-Boot] [PATCH 00/26 v2][NEXT] arm: add full relocation / cache support Wolfgang Denk
2010-09-22 17:51 ` Ben Gardiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284721853-8298-2-git-send-email-hs@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox