public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Steve Sakoman <steve@sakoman.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARMV7: OMAP4: Calculate SDRAM size
Date: Thu, 23 Sep 2010 14:12:56 -0700	[thread overview]
Message-ID: <1285276376.21276.30.camel@quadra> (raw)

From: Aneesh V <aneesh@ti.com>

Calculate the SDRAM size from DMM configuration registers instead of using
hard-coded values. This gives correct values for all different boards.

It's assumed that DMM sections do not overlap memory areas.

Signed-off-by: Aneesh V <aneesh@ti.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
---
 arch/arm/cpu/armv7/omap4/board.c        |   30 +++++++++++++++++++++++++++++-
 arch/arm/include/asm/arch-omap4/omap4.h |   10 ++++++++++
 2 files changed, 39 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 195be6e..8c1f395 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -30,6 +30,7 @@
 #include <common.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
 
 /*
  * Routine: s_init
@@ -66,6 +67,33 @@ void watchdog_init(void)
 	writel(WD_UNLOCK2, &wd2_base->wspr);
 }
 
+
+/*
+ * This function finds the SDRAM size available in the system
+ * based on DMM section configurations
+ * This is needed because the size of memory installed may be
+ * different on different versions of the board
+ */
+u32 sdram_size(void)
+{
+	u32 section, i, total_size = 0, size, addr;
+	for (i = 0; i < 4; i++) {
+		section	= __raw_readl(DMM_LISA_MAP_BASE + i*4);
+		addr = section & DMM_LISA_MAP_SYS_ADDR_MASK;
+		/* See if the address is valid */
+		if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+		    (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
+			size	= ((section & DMM_LISA_MAP_SYS_SIZE_MASK) >>
+				    DMM_LISA_MAP_SYS_SIZE_SHIFT);
+			size	= 1 << size;
+			size	*= SZ_16M;
+			total_size += size;
+		}
+	}
+	return total_size;
+}
+
+
 /*
  * Routine: dram_init
  * Description: sets uboots idea of sdram size
@@ -75,7 +103,7 @@ int dram_init(void)
 	DECLARE_GLOBAL_DATA_PTR;
 
 	gd->bd->bi_dram[0].start = 0x80000000;
-	gd->bd->bi_dram[0].size = 512 << 20;
+	gd->bd->bi_dram[0].size = sdram_size();
 	return 0;
 }
 
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index d0c808d..a30bb33 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -42,6 +42,10 @@
 #define OMAP44XX_L4_WKUP_BASE	0x4A300000
 #define OMAP44XX_L4_PER_BASE	0x48000000
 
+#define OMAP44XX_DRAM_ADDR_SPACE_START	0x80000000
+#define OMAP44XX_DRAM_ADDR_SPACE_END	0xD0000000
+
+
 /* CONTROL */
 #define CTRL_BASE		(OMAP44XX_L4_CORE_BASE + 0x2000)
 #define CONTROL_PADCONF_CORE	(OMAP44XX_L4_CORE_BASE + 0x100000)
@@ -66,6 +70,12 @@
 /* GPMC */
 #define OMAP44XX_GPMC_BASE	0x50000000
 
+/* DMM */
+#define OMAP44XX_DMM_BASE		0x4E000000
+#define DMM_LISA_MAP_BASE		(OMAP44XX_DMM_BASE + 0x40)
+#define DMM_LISA_MAP_SYS_SIZE_MASK	(7 << 20)
+#define DMM_LISA_MAP_SYS_SIZE_SHIFT	20
+#define DMM_LISA_MAP_SYS_ADDR_MASK	(0xFF << 24)
 /*
  * Hardware Register Details
  */
-- 
1.7.0.4

             reply	other threads:[~2010-09-23 21:12 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-09-23 21:12 Steve Sakoman [this message]
2010-09-25 15:00 ` [U-Boot] [PATCH] ARMV7: OMAP4: Calculate SDRAM size Nishanth Menon
2010-09-25 22:34   ` Wolfgang Denk
2010-09-26  2:37   ` Steve Sakoman
2010-09-26  8:39   ` V, Aneesh
2010-09-26  8:52     ` Wolfgang Denk
2010-09-26 12:36     ` Nishanth Menon
2010-09-26 14:37       ` Wolfgang Denk
2010-09-26 14:57         ` Steve Sakoman
2010-09-26 15:28           ` Nishanth Menon
2010-09-27  6:32         ` V, Aneesh
2010-09-27  9:00           ` V, Aneesh
2010-09-27  9:02           ` Wolfgang Denk
2010-09-27 21:17             ` Steve Sakoman
2010-09-27 21:37               ` Wolfgang Denk
2010-09-27 21:41                 ` Steve Sakoman
2010-09-28 17:42                   ` Wolfgang Denk
2010-09-28 17:52                     ` Paulraj, Sandeep

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1285276376.21276.30.camel@quadra \
    --to=steve@sakoman.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox