[U-Boot] [PATCH 3/4] OneNAND: Introduce CONFIG_SYS_IPL_LOAD_ADDR

[Marek Vasut <marek.vasut@gmail.com>]

This allows to specify where the OneNAND IPL should load the U-Boot binary. The
purpose of CONFIG_SYS_LOAD_ADDR is different I believe.

On PXA, this is needed with OneNAND memories that expose only first 1kb of data,
which is insufficient for SDRAM init. U-Boot can then be copied into SRAM.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 include/configs/apollon.h  |    1 +
 onenand_ipl/onenand_boot.c |    4 ++--
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index c1295de..d34e24d 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -199,6 +199,7 @@
 
 /* default load address */
 #define	CONFIG_SYS_LOAD_ADDR	(OMAP2420_SDRC_CS0)
+#define	CONFIG_SYS_IPL_LOAD_ADDR	(OMAP2420_SDRC_CS0)
 
 /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
  * or by 32KHz clk, or from external sig. This rate is divided by a local
diff --git a/onenand_ipl/onenand_boot.c b/onenand_ipl/onenand_boot.c
index 22baebb..2a0c7ce 100644
--- a/onenand_ipl/onenand_boot.c
+++ b/onenand_ipl/onenand_boot.c
@@ -33,11 +33,11 @@ void start_oneboot(void)
 {
 	uchar *buf;
 
-	buf = (uchar *) CONFIG_SYS_LOAD_ADDR;
+	buf = (uchar *) CONFIG_SYS_IPL_LOAD_ADDR;
 
 	onenand_read_block(buf);
 
-	((init_fnc_t *)CONFIG_SYS_LOAD_ADDR)();
+	((init_fnc_t *)CONFIG_SYS_IPL_LOAD_ADDR)();
 
 	/* should never come here */
 }
-- 
1.7.1