[U-Boot] [PATCHv3 0/3] Add support for the IGEP v2 board.

[Steve Sakoman <steve@sakoman.com>]

On Mon, 2010-10-11 at 00:12 +0200, Enric Balletbo i Serra wrote:
> Hello,
> 
> This is the version 3 of patch series to add initial support for
> OMAP3 IGEP v2 board.
> 
> CHANGES:
> 
> * since v2
>     - [1/3] keep lists sorted
>     - [2/3] fix multiline comment style
>     - [3/3] add entry to MAINTAINERS
> 
> * since v1
>     - [2/3] fix parens in NUMONYX_V_ACTIMB_165 define
>     - [3/3] add extra space after first &ctrl_base in file igep0020.c
>     - [3/3] add a space after the 57600 comma in file igep0020.h
>     - [3/3] remove CONFIG_SYS_ARM_WITHOUT_RELOC undef
> 
> $ git diff --stat origin/master 
>  MAINTAINERS                           |    4 +
>  MAKEALL                               |    1 +
>  arch/arm/include/asm/arch-omap3/mem.h |   43 ++++++
>  board/isee/igep0020/Makefile          |   49 +++++++
>  board/isee/igep0020/config.mk         |   33 +++++
>  board/isee/igep0020/igep0020.c        |  128 ++++++++++++++++++
>  board/isee/igep0020/igep0020.h        |  156 ++++++++++++++++++++++
>  boards.cfg                            |    1 +
>  drivers/mtd/onenand/onenand_base.c    |    1 +
>  include/configs/igep0020.h            |  228 +++++++++++++++++++++++++++++++++
>  include/linux/mtd/onenand.h           |    1 +
>  11 files changed, 645 insertions(+), 0 deletions(-)

I noticed that you are using the legacy mmc driver.

I've submitted a patch series to add support for the generic mmc driver
on OMAP3 and OMAP4.

Once this is upstream you might want to consider sending a patch to
switch IGEP v2 from the legacy driver to the generic driver.

Steve