From mboxrd@z Thu Jan 1 00:00:00 1970 From: rags Date: Wed, 26 Sep 2007 05:16:33 -0700 (PDT) Subject: [U-Boot-Users] Unable to write to flash.. In-Reply-To: <12771751.post@talk.nabble.com> References: <12699172.post@talk.nabble.com> <46EE731A.8020807@smiths-aerospace.com> <12771751.post@talk.nabble.com> Message-ID: <12899729.post@talk.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de >We are currently trying to figure this out..Will post once I have an update..Meanwhile, pls let me know if there is anything >else that could be checked.. Thanks for all your support, we were able to narrow the issue down to the RCW. The Local bus 'LALE' signal timing bit in HRCW was being set to 0 (it needed to be '1' for our board). The kicker was that as per the latest MPC8360e manual that specific bit is marked as 'RESERVED' and hence cleared!! -- View this message in context: http://www.nabble.com/Unable-to-write-to-Spansion-flash-on-MPC8360-based-board..-tf4451149.html#a12899729 Sent from the Uboot - Users mailing list archive at Nabble.com.