From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] powerpc/85xx: Introduce CONFIG_SYS_EXTRA_ENV_RELOC
Date: Thu, 18 Nov 2010 14:30:31 -0600 [thread overview]
Message-ID: <1290112231-5991-1-git-send-email-galak@kernel.crashing.org> (raw)
Some systems need to relocate the env_addr pointer early because the
location it points to will get invalidated before env_relocate is
called. One example is on systems that might use a L2 or L3 cache
in SRAM mode and initialize that cache from SRAM mode back to being
a cache in cpu_init_r.
We set this on the 85xx boards that have support for NAND, SPI, or
SDHC/MMC boot support as they use a secondary cache in SRAM mode and
need the env_addr pointer relocated since we change from SRAM to normal
cache mode in cpu_init_r.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
* Fixed comments per becky feedback
arch/powerpc/lib/board.c | 11 +++++++++++
include/configs/MPC8536DS.h | 1 +
include/configs/MPC8569MDS.h | 1 +
include/configs/P1_P2_RDB.h | 1 +
4 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 2e0749d..40d8c92 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -645,6 +645,17 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
#endif
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
+#endif
+
#ifdef CONFIG_SERIAL_MULTI
serial_initialize();
#endif
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 850665a..50d282c 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -245,6 +245,7 @@
#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index c7973b4..20fd672 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -205,6 +205,7 @@ extern unsigned long get_clock_freq(void);
#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h
index 610f3ed..8069b55 100644
--- a/include/configs/P1_P2_RDB.h
+++ b/include/configs/P1_P2_RDB.h
@@ -204,6 +204,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
#else
#undef CONFIG_SYS_RAMBOOT
#endif
--
1.7.2.3
next reply other threads:[~2010-11-18 20:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-18 20:30 Kumar Gala [this message]
2010-11-29 14:47 ` [U-Boot] [PATCH v2] powerpc/85xx: Introduce CONFIG_SYS_EXTRA_ENV_RELOC Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1290112231-5991-1-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox