From: Becky Bruce <beckyb@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/13] MPC8568/MPC8569: Remove CONFIG_DDR_DLL define
Date: Thu, 2 Dec 2010 17:45:37 -0600 [thread overview]
Message-ID: <1291333539-11884-12-git-send-email-beckyb@kernel.crashing.org> (raw)
In-Reply-To: <1291333539-11884-11-git-send-email-beckyb@kernel.crashing.org>
Neither of these parts should have the erratum this is meant to
work around. Delete it.
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
---
include/configs/MPC8568MDS.h | 1 -
include/configs/MPC8569MDS.h | 1 -
2 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 281918b..7817fba 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -82,7 +82,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_SPD
-#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 720b5b6..4cae94d 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -122,7 +122,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_SPD
-#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
--
1.6.0.6
next prev parent reply other threads:[~2010-12-02 23:45 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-02 23:45 [U-Boot] [PATCH 00/13] Go to common initdram() on 85xx-based boards Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 01/13] mpc8540eval: Split initdram() into initdram() and sdram_init() Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 02/13] tqm85xx: create fixed_sdram() to do sdram setup Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 03/13] mpc85xx/tlb.c: Allow platforms to specify wimge bits Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 04/13] socrates: rename sdram_setup fixed_sdram() Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 05/13] mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 06/13] PM854: rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 07/13] PM856: Rename " Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 08/13] SBC8560: #define CONFIG_SYS_LBC_NO_SDRAM_INIT Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 09/13] stxgp3: " Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 10/13] SBC8540: " Becky Bruce
2010-12-02 23:45 ` Becky Bruce [this message]
2010-12-02 23:45 ` [U-Boot] [PATCH 12/13] mpc85xx boards: initdram() cleanup/bugfix Becky Bruce
2010-12-02 23:45 ` [U-Boot] [PATCH 13/13] 85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN Becky Bruce
2010-12-03 16:09 ` [U-Boot] [PATCH 12/13] mpc85xx boards: initdram() cleanup/bugfix Peter Tyser
2010-12-03 20:54 ` [U-Boot] [PATCH 08/13] SBC8560: #define CONFIG_SYS_LBC_NO_SDRAM_INIT Becky Bruce
2010-12-03 21:22 ` Peter Tyser
2010-12-03 2:26 ` Timur Tabi
2010-12-03 20:44 ` Becky Bruce
2010-12-03 21:48 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291333539-11884-12-git-send-email-beckyb@kernel.crashing.org \
--to=beckyb@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox