From: Becky Bruce <beckyb@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 04/12] socrates: rename sdram_setup fixed_sdram()
Date: Mon, 13 Dec 2010 15:06:44 -0600 [thread overview]
Message-ID: <1292274412-11340-5-git-send-email-beckyb@kernel.crashing.org> (raw)
In-Reply-To: <1292274412-11340-4-git-send-email-beckyb@kernel.crashing.org>
This will help us go to a fixed initdram() for all 85xx boards going
forward. sdram_setup() had an argument that it didn't need, since the
value was #defined.
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
---
board/socrates/sdram.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c
index 029ba02..ef897b2 100644
--- a/board/socrates/sdram.c
+++ b/board/socrates/sdram.c
@@ -39,7 +39,7 @@
* so this should be extended for other future boards
* using this routine!
*/
-long int sdram_setup(int casl)
+long int fixed_sdram(void)
{
volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
@@ -85,7 +85,7 @@ phys_size_t initdram (int board_type)
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
#else
- dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL);
+ dram_size = fixed_sdram();
#endif
return dram_size;
}
--
1.5.6.5
next prev parent reply other threads:[~2010-12-13 21:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-13 21:06 [U-Boot] [PATCH v2 00/12] Go to common initdram() on 85xx-based boards Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 01/12] mpc8540eval: Split initdram() into initdram() and sdram_init() Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 02/12] tqm85xx: create fixed_sdram() to do sdram setup Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 03/12] mpc85xx/tlb.c: Allow platforms to specify wimge bits Becky Bruce
2010-12-13 21:06 ` Becky Bruce [this message]
2010-12-13 21:06 ` [U-Boot] [PATCH V2 05/12] mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 06/12] PM854: rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 07/12] PM856: Rename " Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 08/12] MPC8568/MPC8569: Remove CONFIG_DDR_DLL define Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 09/12] mpc85xx boards: initdram() cleanup/bugfix Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 10/12] 85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 11/12] mpc85xx: rename sdram_init() lbc_sdram_init() Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 12/12] MPC8xxx DDR: align informational prints Becky Bruce
2010-12-14 2:12 ` [U-Boot] [PATCH V2 09/12] mpc85xx boards: initdram() cleanup/bugfix Paul Gortmaker
2010-12-14 16:38 ` Becky Bruce
2010-12-15 23:25 ` Paul Gortmaker
2010-12-15 23:27 ` Becky Bruce
2010-12-14 4:21 ` [U-Boot] [PATCH V2 08/12] MPC8568/MPC8569: Remove CONFIG_DDR_DLL define Kumar Gala
2010-12-14 4:28 ` [U-Boot] [PATCH V2 07/12] PM856: Rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE Kumar Gala
2010-12-14 4:28 ` [U-Boot] [PATCH V2 06/12] PM854: rename " Kumar Gala
2010-12-14 4:21 ` [U-Boot] [PATCH V2 05/12] mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition Kumar Gala
2010-12-14 4:21 ` [U-Boot] [PATCH V2 04/12] socrates: rename sdram_setup fixed_sdram() Kumar Gala
2010-12-14 4:19 ` [U-Boot] [PATCH V2 03/12] mpc85xx/tlb.c: Allow platforms to specify wimge bits Kumar Gala
2010-12-14 4:28 ` [U-Boot] [PATCH V2 01/12] mpc8540eval: Split initdram() into initdram() and sdram_init() Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292274412-11340-5-git-send-email-beckyb@kernel.crashing.org \
--to=beckyb@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox