From: Becky Bruce <beckyb@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 08/12] MPC8568/MPC8569: Remove CONFIG_DDR_DLL define
Date: Mon, 13 Dec 2010 15:06:48 -0600 [thread overview]
Message-ID: <1292274412-11340-9-git-send-email-beckyb@kernel.crashing.org> (raw)
In-Reply-To: <1292274412-11340-8-git-send-email-beckyb@kernel.crashing.org>
Neither of these parts should have the erratum this is meant to
work around. Delete it.
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
---
include/configs/MPC8568MDS.h | 1 -
include/configs/MPC8569MDS.h | 1 -
2 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 281918b..7817fba 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -82,7 +82,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_SPD
-#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index e64277e..2395cb2 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -122,7 +122,6 @@ extern unsigned long get_clock_freq(void);
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_SPD
-#define CONFIG_DDR_DLL /* possible DLL fix needed */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
--
1.5.6.5
next prev parent reply other threads:[~2010-12-13 21:06 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-13 21:06 [U-Boot] [PATCH v2 00/12] Go to common initdram() on 85xx-based boards Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 01/12] mpc8540eval: Split initdram() into initdram() and sdram_init() Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 02/12] tqm85xx: create fixed_sdram() to do sdram setup Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 03/12] mpc85xx/tlb.c: Allow platforms to specify wimge bits Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 04/12] socrates: rename sdram_setup fixed_sdram() Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 05/12] mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 06/12] PM854: rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 07/12] PM856: Rename " Becky Bruce
2010-12-13 21:06 ` Becky Bruce [this message]
2010-12-13 21:06 ` [U-Boot] [PATCH V2 09/12] mpc85xx boards: initdram() cleanup/bugfix Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 10/12] 85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 11/12] mpc85xx: rename sdram_init() lbc_sdram_init() Becky Bruce
2010-12-13 21:06 ` [U-Boot] [PATCH V2 12/12] MPC8xxx DDR: align informational prints Becky Bruce
2010-12-14 2:12 ` [U-Boot] [PATCH V2 09/12] mpc85xx boards: initdram() cleanup/bugfix Paul Gortmaker
2010-12-14 16:38 ` Becky Bruce
2010-12-15 23:25 ` Paul Gortmaker
2010-12-15 23:27 ` Becky Bruce
2010-12-14 4:21 ` [U-Boot] [PATCH V2 08/12] MPC8568/MPC8569: Remove CONFIG_DDR_DLL define Kumar Gala
2010-12-14 4:28 ` [U-Boot] [PATCH V2 07/12] PM856: Rename CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_BASE Kumar Gala
2010-12-14 4:28 ` [U-Boot] [PATCH V2 06/12] PM854: rename " Kumar Gala
2010-12-14 4:21 ` [U-Boot] [PATCH V2 05/12] mpc8569mds: Remove unnecessary CONFIG_SYS_LBC_SDRAM_BASE definition Kumar Gala
2010-12-14 4:21 ` [U-Boot] [PATCH V2 04/12] socrates: rename sdram_setup fixed_sdram() Kumar Gala
2010-12-14 4:19 ` [U-Boot] [PATCH V2 03/12] mpc85xx/tlb.c: Allow platforms to specify wimge bits Kumar Gala
2010-12-14 4:28 ` [U-Boot] [PATCH V2 01/12] mpc8540eval: Split initdram() into initdram() and sdram_init() Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292274412-11340-9-git-send-email-beckyb@kernel.crashing.org \
--to=beckyb@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox