From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/2] powerpc/85xx: Add Support for Freescale P1014 Processor
Date: Fri, 14 Jan 2011 10:41:11 -0600 [thread overview]
Message-ID: <1295023271-11897-2-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1295023271-11897-1-git-send-email-galak@kernel.crashing.org>
From: Poonam Aggrwal <poonam.aggrwal@freescale.com>
The P1014 is similar to the P1010 processor with the following differences:
- 16bit DDR with ECC. (P1010 has 32bit DDR w/o ECC)
- no eCAN interface. (P1010 has 2 eCAN interfaces)
- Two SGMII interface (P1010 has 3 SGMII)
- No secure boot
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/cpu/mpc85xx/Makefile | 1 +
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 ++
arch/powerpc/include/asm/config.h | 4 ++--
arch/powerpc/include/asm/processor.h | 2 ++
drivers/misc/fsl_law.c | 2 +-
5 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index e1261cf..3f118db 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -54,6 +54,7 @@ COBJS-$(CONFIG_P1010) += ddr-gen3.o
COBJS-$(CONFIG_P1011) += ddr-gen3.o
COBJS-$(CONFIG_P1012) += ddr-gen3.o
COBJS-$(CONFIG_P1013) += ddr-gen3.o
+COBJS-$(CONFIG_P1014) += ddr-gen3.o
COBJS-$(CONFIG_P1020) += ddr-gen3.o
COBJS-$(CONFIG_P1021) += ddr-gen3.o
COBJS-$(CONFIG_P1022) += ddr-gen3.o
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index ac720a5..0ec1c16 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -71,6 +71,8 @@ struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(P1012, P1012, 1),
CPU_TYPE_ENTRY(P1012, P1012_E, 1),
CPU_TYPE_ENTRY(P1013, P1013, 1),
+ CPU_TYPE_ENTRY(P1014, P1014_E, 1),
+ CPU_TYPE_ENTRY(P1014, P1014, 1),
CPU_TYPE_ENTRY(P1013, P1013_E, 1),
CPU_TYPE_ENTRY(P1020, P1020, 2),
CPU_TYPE_ENTRY(P1020, P1020_E, 2),
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index d80fc97..965c874 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -69,7 +69,7 @@
/* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
#if defined(CONFIG_TSEC_ENET) && \
- (defined(CONFIG_P1010) || \
+ (defined(CONFIG_P1010) || defined(CONFIG_P1014) || \
defined(CONFIG_P1020) || defined(CONFIG_P1011))
#define CONFIG_TSECV2
#endif
@@ -78,7 +78,7 @@
* SEC (crypto unit) major compatible version determination
*/
#if defined(CONFIG_FSL_CORENET) || \
- defined(CONFIG_P1010)
+ defined(CONFIG_P1010) || defined(CONFIG_P1014)
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
#define CONFIG_SYS_FSL_SEC_COMPAT 2
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 6b43dc5..646e0db 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1046,6 +1046,8 @@
#define SVR_P1012_E 0x80ED01
#define SVR_P1013 0x80E700
#define SVR_P1013_E 0x80EF00
+#define SVR_P1014 0x80F101
+#define SVR_P1014_E 0x80F901
#define SVR_P1020 0x80E400
#define SVR_P1020_E 0x80EC00
#define SVR_P1021 0x80E401
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 931cc71..d2b0cde 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -38,7 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610)
#define FSL_HW_NUM_LAWS 10
#elif defined(CONFIG_MPC8536) || defined(CONFIG_MPC8572) || \
- defined(CONFIG_P1010) || \
+ defined(CONFIG_P1010) || defined(CONFIG_P1014) || \
defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
defined(CONFIG_P1012) || defined(CONFIG_P1021) || \
defined(CONFIG_P1013) || defined(CONFIG_P1022) || \
--
1.7.2.3
next prev parent reply other threads:[~2011-01-14 16:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-14 16:41 [U-Boot] [PATCH 1/2] powerpc/85xx: Add Support for Freescale P1010 Processor Kumar Gala
2011-01-14 16:41 ` Kumar Gala [this message]
2011-01-18 4:17 ` [U-Boot] [PATCH 2/2] powerpc/85xx: Add Support for Freescale P1014 Processor Kumar Gala
2011-01-19 8:10 ` Wolfgang Denk
2011-01-19 9:10 ` Kumar Gala
2011-01-18 4:17 ` [U-Boot] [PATCH 1/2] powerpc/85xx: Add Support for Freescale P1010 Processor Kumar Gala
2011-01-19 8:09 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295023271-11897-2-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox