From: Tom Warren <twarren.nvidia@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/4 V2] Add basic NVIDIA Tegra2 SoC support
Date: Fri, 14 Jan 2011 10:11:33 -0700 [thread overview]
Message-ID: <1295025097-25680-1-git-send-email-twarren@nvidia.com> (raw)
This series of patches adds preliminary/baseline support for NVIDIA's
Tegra2 SoC. Basic CPU (AVP), RAM and UART init are covered so that the
system (Harmony or Seaboard) can boot to the U-Boot serial cmd prompt.
Further support (for Cortex-A9 CPU(s), USB, SD/MMC, etc.) to follow.
V2: Make changes based on feedback from Peter Tyser and Sandeep Paulraj.
Tom Warren (4):
arm: Tegra2: Add basic NVIDIA Tegra2 SoC support
serial: Add Tegra2 serial port support
arm: Tegra2: Add support for NVIDIA Harmony board
arm: Tegra2: Add support for NVIDIA Seaboard board
MAINTAINERS | 5 +
arch/arm/cpu/armv7/tegra2/Makefile | 48 ++++++
arch/arm/cpu/armv7/tegra2/board.c | 91 ++++++++++
arch/arm/cpu/armv7/tegra2/config.mk | 28 +++
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 66 +++++++
arch/arm/cpu/armv7/tegra2/sys_info.c | 35 ++++
arch/arm/cpu/armv7/tegra2/timer.c | 122 +++++++++++++
arch/arm/include/asm/arch-tegra2/clk_rst.h | 155 +++++++++++++++++
arch/arm/include/asm/arch-tegra2/pinmux.h | 52 ++++++
arch/arm/include/asm/arch-tegra2/pmc.h | 125 ++++++++++++++
arch/arm/include/asm/arch-tegra2/sys_proto.h | 33 ++++
arch/arm/include/asm/arch-tegra2/tegra2.h | 49 ++++++
arch/arm/include/asm/arch-tegra2/uart.h | 45 +++++
board/nvidia/common/board.c | 234 ++++++++++++++++++++++++++
board/nvidia/common/board.h | 57 +++++++
board/nvidia/harmony/Makefile | 50 ++++++
board/nvidia/seaboard/Makefile | 50 ++++++
boards.cfg | 2 +
common/serial.c | 3 +-
include/configs/harmony.h | 48 ++++++
include/configs/seaboard.h | 43 +++++
include/configs/tegra2-common.h | 160 ++++++++++++++++++
include/serial.h | 3 +-
23 files changed, 1502 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/Makefile
create mode 100644 arch/arm/cpu/armv7/tegra2/board.c
create mode 100644 arch/arm/cpu/armv7/tegra2/config.mk
create mode 100644 arch/arm/cpu/armv7/tegra2/lowlevel_init.S
create mode 100644 arch/arm/cpu/armv7/tegra2/sys_info.c
create mode 100644 arch/arm/cpu/armv7/tegra2/timer.c
create mode 100644 arch/arm/include/asm/arch-tegra2/clk_rst.h
create mode 100644 arch/arm/include/asm/arch-tegra2/pinmux.h
create mode 100644 arch/arm/include/asm/arch-tegra2/pmc.h
create mode 100644 arch/arm/include/asm/arch-tegra2/sys_proto.h
create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2.h
create mode 100644 arch/arm/include/asm/arch-tegra2/uart.h
create mode 100644 board/nvidia/common/board.c
create mode 100644 board/nvidia/common/board.h
create mode 100644 board/nvidia/harmony/Makefile
create mode 100644 board/nvidia/seaboard/Makefile
create mode 100644 include/configs/harmony.h
create mode 100644 include/configs/seaboard.h
create mode 100644 include/configs/tegra2-common.h
--
1.7.3.5
next reply other threads:[~2011-01-14 17:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-14 17:11 Tom Warren [this message]
2011-01-14 17:11 ` [U-Boot] [PATCH 1/4 V2] arm: Tegra2: Add basic NVIDIA Tegra2 SoC support Tom Warren
2011-01-14 17:11 ` [U-Boot] [PATCH 2/4 V2] serial: Add Tegra2 serial port support Tom Warren
2011-01-14 17:11 ` [U-Boot] [PATCH 3/4 V2] arm: Tegra2: Add support for NVIDIA Harmony board Tom Warren
2011-01-14 17:11 ` [U-Boot] [PATCH 4/4 V2] arm: Tegra2: Add support for NVIDIA Seaboard board Tom Warren
2011-01-14 19:59 ` [U-Boot] [PATCH 0/4 V2] Add basic NVIDIA Tegra2 SoC support Peter Tyser
2011-01-14 20:41 ` Tom Warren
2011-01-14 21:36 ` Peter Tyser
2011-01-14 22:39 ` Tom Warren
2011-01-14 23:00 ` Albert ARIBAUD
2011-01-14 23:23 ` Peter Tyser
2011-01-15 0:01 ` Wolfgang Denk
2011-01-17 23:27 ` Wolfgang Denk
2011-01-17 23:27 ` Wolfgang Denk
2011-01-19 21:23 ` Tom Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295025097-25680-1-git-send-email-twarren@nvidia.com \
--to=twarren.nvidia@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox