From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3 RESEND] MX51EVK: Use SWx macros in PMIC init
Date: Wed, 19 Jan 2011 00:19:06 +0100 [thread overview]
Message-ID: <1295392747-26643-2-git-send-email-marek.vasut@gmail.com> (raw)
In-Reply-To: <1295392747-26643-1-git-send-email-marek.vasut@gmail.com>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
board/freescale/mx51evk/mx51evk.c | 7 ++++---
1 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 2160d5a..bcf1934 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -198,17 +198,18 @@ static void power_init(void)
/* Set core voltage to 1.1V */
val = pmic_reg_read(REG_SW_0);
- val = (val & (~0x1F)) | 0x14;
+ val = (val & (~SWx_VOLT_MASK)) | SWx_1_100V;
pmic_reg_write(REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
val = pmic_reg_read(REG_SW_1);
- val = (val & (~0x1F)) | 0x1A;
+ val = (val & (~SWx_VOLT_MASK)) | SWx_1_250V;
+
pmic_reg_write(REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.25 */
val = pmic_reg_read(REG_SW_2);
- val = (val & (~0x1F)) | 0x1A;
+ val = (val & (~SWx_VOLT_MASK)) | SWx_1_250V;
pmic_reg_write(REG_SW_2, val);
udelay(50);
--
1.7.2.3
next prev parent reply other threads:[~2011-01-18 23:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 23:19 [U-Boot] [PATCH 1/3 v2] MC13892: Add SWx buck switchers definitions Marek Vasut
2011-01-18 23:19 ` Marek Vasut [this message]
2011-01-19 11:15 ` [U-Boot] [PATCH 2/3 RESEND] MX51EVK: Use SWx macros in PMIC init Sergei Shtylyov
2011-01-19 14:25 ` Marek Vasut
2011-01-18 23:19 ` [U-Boot] [PATCH 3/3 v4] iMX5: EfikaMX: Preliminary board support Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295392747-26643-2-git-send-email-marek.vasut@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox