[U-Boot] [RFC] mpc83xx: add config options to spd_sdram

[York Sun <yorksun@freescale.com>]

On Thu, 2011-04-07 at 22:42 +0200, Schwarz,Andre wrote:
> York,
> 
>  
> 
> 
> "Schwarz,Andre" <andre.schwarz@matrix-vision.de> hat am 6. April 2011
> um 20:42 geschrieben:
> 
> > York,
> > 
> >  
> > 
> > ok - will give it a try tomorrow.
> > 
> >  
> > 
>  
> 
> hmm - having a look at the Makefile it looks like I need
> CONFIG_FSL_DDR2.
> 
> This seems to pull in the "new" code ... without omitting the "old"
> one 
> 
> in arch/powerpc/cpu/mpc83xx/spd_sdram.c
> 
>  
> 
> The Makefile further uses ctrl_regs.c ... which fails.
> 
>  
> 
> having a look arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c gives :
> 
>  
> 
> #ifdef CONFIG_MPC85xx
> 
>   #define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR
> 
> #elif defined(CONFIG_MPC86xx)
> 
>   #define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR
> 
> #else        
> 
>   #error "Undefined _DDR_ADDR"
> 
> #endif 
> 
>  
> 
> There's not a single sign of any 83xx within this code.
> 
> Grepping through the board configs only show 85xx and 86xx based
> boards using it.
> 
>  
> 
> Sorry, but I'm feeling like an idiot.
> 
>  
> 
> Are you playing some game with me or am I simply unable to understand
> the code ?
> 
>  
> 
> Please shed some light on this.
> 
>  
Andre,

I am sorry I totally ignored the subject with mpc83xx. I was thinking of
mpc85xx.

You are right the old code is in spd_sdram.c and it is still in use for
mpc83xx. Unless to adjust the code, there is no board specific file.

York