From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] ARM: mx31: Print the silicon version
Date: Mon, 11 Apr 2011 00:08:15 -0300 [thread overview]
Message-ID: <1302491295-11222-1-git-send-email-festevam@gmail.com> (raw)
Use the same method of the Linux kernel to print the MX31 silicon version on
boot.
Tested on a MX31PDK with a 2.0 silicon, where it shows:
CPU: Freescale i.MX31 at 531 MHz
MX31 silicon rev 2.0
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- rename the CPU detect function name to get_cpu_rev
- Use struct to access iim register
arch/arm/cpu/arm1136/mx31/generic.c | 18 ++++++++++++
arch/arm/include/asm/arch-mx31/imx-regs.h | 20 +++++++++++++
arch/arm/include/asm/imx_soc_revision.h | 42 +++++++++++++++++++++++++++++
3 files changed, 80 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/imx_soc_revision.h
diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index fa07fec..cfcb3d8 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/io.h>
+#include <asm/imx_soc_revision.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
@@ -106,11 +107,28 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
}
+void get_cpu_rev(void)
+{
+ u32 i, srev;
+
+ /* read SREV register from IIM module */
+ struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR;
+ srev = readl(&iim->iim_srev);
+
+ for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+ if (srev == mx31_cpu_type[i].srev) {
+ printf("MX31 silicon rev %s\n", mx31_cpu_type[i].v);
+ return;
+ }
+ printf("Unknown CPU identifier. srev = %02x\n", srev);
+}
+
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo (void)
{
printf("CPU: Freescale i.MX31 at %d MHz\n",
mx31_get_mcu_main_clk() / 1000000);
+ get_cpu_rev();
return 0;
}
#endif
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 37337f2..6401a37 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -84,6 +84,24 @@ struct wdog_regs {
u16 wrsr; /* Reset Status */
};
+/* IIM Control Registers */
+struct iim_regs {
+ u32 iim_stat;
+ u32 iim_statm;
+ u32 iim_err;
+ u32 iim_emask;
+ u32 iim_fctl;
+ u32 iim_ua;
+ u32 iim_la;
+ u32 iim_sdat;
+ u32 iim_prev;
+ u32 iim_srev;
+ u32 iim_prog_p;
+ u32 iim_scs0;
+ u32 iim_scs1;
+ u32 iim_scs2;
+ u32 iim_scs3;
+};
#define IOMUX_PADNUM_MASK 0x1ff
#define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK)
@@ -480,6 +498,8 @@ enum iomux_pins {
#define CCMR_FPM (1 << 1)
#define CCMR_CKIH (2 << 1)
+#define MX31_IIM_BASE_ADDR 0x5001C000
+
#define PDR0_CSI_PODF(x) (((x) & 0x1ff) << 23)
#define PDR0_PER_PODF(x) (((x) & 0x1f) << 16)
#define PDR0_HSP_PODF(x) (((x) & 0x7) << 11)
diff --git a/arch/arm/include/asm/imx_soc_revision.h b/arch/arm/include/asm/imx_soc_revision.h
new file mode 100644
index 0000000..0179d52
--- /dev/null
+++ b/arch/arm/include/asm/imx_soc_revision.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation;
+ */
+
+#define IMX_CHIP_REVISION_1_0 0x10
+#define IMX_CHIP_REVISION_1_1 0x11
+#define IMX_CHIP_REVISION_1_2 0x12
+#define IMX_CHIP_REVISION_1_3 0x13
+#define IMX_CHIP_REVISION_2_0 0x20
+#define IMX_CHIP_REVISION_2_1 0x21
+#define IMX_CHIP_REVISION_2_2 0x22
+#define IMX_CHIP_REVISION_2_3 0x23
+#define IMX_CHIP_REVISION_3_0 0x30
+#define IMX_CHIP_REVISION_3_1 0x31
+#define IMX_CHIP_REVISION_3_2 0x32
+#define IMX_CHIP_REVISION_3_3 0x33
+#define IMX_CHIP_REVISION_UNKNOWN 0xff
+
+struct mx3_cpu_type {
+ u8 srev;
+ const char *name;
+ const char *v;
+ unsigned int rev;
+};
+
+struct mx3_cpu_type mx31_cpu_type[] = {
+ { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = IMX_CHIP_REVISION_1_0 },
+ { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = IMX_CHIP_REVISION_1_1 },
+ { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = IMX_CHIP_REVISION_1_2 },
+ { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
+ { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = IMX_CHIP_REVISION_2_0 },
+};
--
1.6.0.4
next reply other threads:[~2011-04-11 3:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-11 3:08 Fabio Estevam [this message]
2011-04-11 10:16 ` [U-Boot] [PATCH v2] ARM: mx31: Print the silicon version Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1302491295-11222-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox