From: Aneesh V <aneesh@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 03/10] armv7: cache maintenance operations for armv7
Date: Thu, 12 May 2011 17:41:09 +0530 [thread overview]
Message-ID: <1305202276-27784-4-git-send-email-aneesh@ti.com> (raw)
In-Reply-To: <1299589658-30896-1-git-send-email-aneesh@ti.com>
- Add a framework for layered cache maintenance
- separate out SOC specific outer cache maintenance from
maintenance of caches known to CPU
- Add generic ARMv7 cache maintenance operations that affect all
caches known to ARMv7 CPUs. For instance in Cortex-A8 these
opertions will affect both L1 and L2 caches. In Cortex-A9
these will affect only L1 cache
- D-cache operations supported:
- Invalidate entire D-cache
- Invalidate D-cache range
- Flush(clean & invalidate) entire D-cache
- Flush D-cache range
- I-cache operations supported:
- Invalidate entire I-cache
- Add maintenance functions for TLB, branch predictor array etc.
- Enable -march=armv7-a so that armv7 assembly instructions can be
used
Signed-off-by: Aneesh V <aneesh@ti.com>
---
V2:
* Blank line after local variable declarations - fixed globally
* Change from pointers to weakly linked functions for outer
cache operations
* Explicitly added a copy of flush_cache() under
#ifdefCONFIG_SYS_NO_DCACHE
* Change -march=armv7-a back to armv5
* Update documentation with cache related CONFIG options
---
README | 5 +
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/cache_v7.c | 390 +++++++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/armv7.h | 68 +++++++
include/common.h | 5 +-
5 files changed, 468 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/cpu/armv7/cache_v7.c
create mode 100644 arch/arm/include/asm/armv7.h
diff --git a/README b/README
index 76b1500..c3b6bec 100644
--- a/README
+++ b/README
@@ -455,6 +455,11 @@ The following options need to be configured:
Note: If a "bootargs" environment is defined, it will overwride
the defaults discussed just above.
+- Cache Configuration:
+ CONFIG_SYS_NO_ICACHE - Do not enable instruction cache in U-Boot
+ CONFIG_SYS_NO_DCACHE - Do not enable data cache in U-Boot
+ CONFIG_SYS_NO_L2CACHE- Do not enable L2 cache in U-Boot
+
- Serial Ports:
CONFIG_PL010_SERIAL
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 8c0e915..299792a 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).o
START := start.o
-COBJS := cpu.o
+COBJS := cpu.o cache_v7.o
COBJS += syslib.o
SRCS := $(START:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c
new file mode 100644
index 0000000..46d8e09
--- /dev/null
+++ b/arch/arm/cpu/armv7/cache_v7.c
@@ -0,0 +1,390 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/types.h>
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/utils.h>
+
+#define ARMV7_DCACHE_INVAL_ALL 1
+#define ARMV7_DCACHE_CLEAN_INVAL_ALL 2
+#define ARMV7_DCACHE_INVAL_RANGE 3
+#define ARMV7_DCACHE_CLEAN_INVAL_RANGE 4
+
+#ifndef CONFIG_SYS_NO_DCACHE
+/*
+ * Write the level and type you want to Cache Size Selection Register(CSSELR)
+ * to get size details from Current Cache Size ID Register(CCSIDR)
+ */
+static void set_csselr(u32 level, u32 type)
+{ u32 csselr = level << 1 | type;
+
+ /* Write to Cache Size Selection Register(CSSELR) */
+ asm volatile ("mcr p15, 2, %0, c0, c0, 0" : : "r" (csselr));
+}
+
+static u32 get_ccsidr(void)
+{
+ u32 ccsidr;
+
+ /* Read current CP15 Cache Size ID Register */
+ asm volatile ("mrc p15, 1, %0, c0, c0, 0" : "=r" (ccsidr));
+ return ccsidr;
+}
+
+static u32 get_clidr(void)
+{
+ u32 clidr;
+
+ /* Read current CP15 Cache Level ID Register */
+ asm volatile ("mrc p15,1,%0,c0,c0,1" : "=r" (clidr));
+ return clidr;
+}
+
+static void v7_inval_dcache_level_setway(u32 level, u32 num_sets,
+ u32 num_ways, u32 way_shift,
+ u32 log2_line_len)
+{
+ int way, set, setway;
+
+ /*
+ * For optimal assembly code:
+ * a. count down
+ * b. have bigger loop inside
+ */
+ for (way = num_ways - 1; way >= 0 ; way--)
+ for (set = num_sets - 1; set >= 0; set--) {
+ setway = (level << 1) | (set << log2_line_len) |
+ (way << way_shift);
+ /* Invalidate data/unified cache line by set/way */
+ asm volatile (" mcr p15, 0, %0, c7, c6, 2"
+ : : "r" (setway));
+ }
+ /* DMB to make sure the operation is complete */
+ CP15DMB;
+}
+
+static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets,
+ u32 num_ways, u32 way_shift,
+ u32 log2_line_len)
+{
+ int way, set, setway;
+
+ /*
+ * For optimal assembly code:
+ * a. count down
+ * b. have bigger loop inside
+ */
+ for (way = num_ways - 1; way >= 0 ; way--)
+ for (set = num_sets - 1; set >= 0; set--) {
+ setway = (level << 1) | (set << log2_line_len) |
+ (way << way_shift);
+ /*
+ * Clean & Invalidate data/unified
+ * cache line by set/way
+ */
+ asm volatile (" mcr p15, 0, %0, c7, c14, 2"
+ : : "r" (setway));
+ }
+ /* DMB to make sure the operation is complete */
+ CP15DMB;
+}
+
+static void v7_maint_dcache_level_setway(u32 level, u32 operation)
+{
+ u32 ccsidr;
+ u32 num_sets, num_ways, log2_line_len, log2_num_ways;
+ u32 way_shift;
+
+ set_csselr(level, ARMV7_CSSELR_IND_DATA_UNIFIED);
+
+ ccsidr = get_ccsidr();
+
+ log2_line_len = get_bit_field(ccsidr, CCSIDR_LINE_SIZE_OFFSET,
+ CCSIDR_LINE_SIZE_MASK) + 2;
+ /* Converting from words to bytes */
+ log2_line_len += 2;
+
+ num_ways = get_bit_field(ccsidr, CCSIDR_ASSOCIATIVITY_OFFSET,
+ CCSIDR_ASSOCIATIVITY_MASK) + 1;
+ num_sets = get_bit_field(ccsidr, CCSIDR_NUM_SETS_OFFSET,
+ CCSIDR_NUM_SETS_MASK) + 1;
+ /*
+ * According to ARMv7 ARM number of sets and number of ways need
+ * not be a power of 2
+ */
+ log2_num_ways = log_2_n_round_up(num_ways);
+
+ way_shift = (32 - log2_num_ways);
+ if (operation == ARMV7_DCACHE_INVAL_ALL)
+ v7_inval_dcache_level_setway(level, num_sets, num_ways,
+ way_shift, log2_line_len);
+ else if (operation == ARMV7_DCACHE_CLEAN_INVAL_ALL)
+ v7_clean_inval_dcache_level_setway(level, num_sets, num_ways,
+ way_shift, log2_line_len);
+}
+
+static void v7_maint_dcache_all(u32 operation)
+{
+ u32 level, cache_type, level_start_bit = 0;
+
+ u32 clidr = get_clidr();
+
+ for (level = 0; level < 7; level++) {
+ cache_type = get_bit_field(clidr, level_start_bit,
+ 0x7 << level_start_bit);
+ if ((cache_type == ARMV7_CLIDR_CTYPE_DATA_ONLY) ||
+ (cache_type == ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA) ||
+ (cache_type == ARMV7_CLIDR_CTYPE_UNIFIED))
+ v7_maint_dcache_level_setway(level, operation);
+ level_start_bit += 3;
+ }
+}
+
+static void v7_dcache_clean_inval_range(u32 start,
+ u32 stop, u32 line_len)
+{
+ u32 mva;
+
+ /* Align start to cache line boundary */
+ start &= ~(line_len - 1);
+ for (mva = start; mva < stop; mva = mva + line_len)
+ /* DCCIMVAC - Clean & Invalidate data cache by MVA to PoC */
+ asm volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" (mva));
+}
+
+static void v7_dcache_inval_range(u32 start, u32 stop, u32 line_len)
+{
+ u32 mva;
+
+ /*
+ * If start address is not aligned to cache-line flush the first
+ * line to prevent affecting somebody else's buffer
+ */
+ if (start & (line_len - 1)) {
+ v7_dcache_clean_inval_range(start, start + 1, line_len);
+ /* move to next cache line */
+ start = (start + line_len - 1) & ~(line_len - 1);
+ }
+
+ /*
+ * If stop address is not aligned to cache-line flush the last
+ * line to prevent affecting somebody else's buffer
+ */
+ if (stop & (line_len - 1)) {
+ v7_dcache_clean_inval_range(stop, stop + 1, line_len);
+ /* align to the beginning of this cache line */
+ stop &= ~(line_len - 1);
+ }
+
+ for (mva = start; mva < stop; mva = mva + line_len)
+ /* DCIMVAC - Invalidate data cache by MVA to PoC */
+ asm volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" (mva));
+}
+
+static void v7_dcache_maint_range(u32 start, u32 stop, u32 range_op)
+{
+ u32 line_len, ccsidr;
+
+ ccsidr = get_ccsidr();
+ line_len = get_bit_field(ccsidr, CCSIDR_LINE_SIZE_OFFSET,
+ CCSIDR_LINE_SIZE_MASK) + 2;
+ /* Converting from words to bytes */
+ line_len += 2;
+ /* converting from log2(linelen) to linelen */
+ line_len = 1 << line_len;
+
+ switch (range_op) {
+ case ARMV7_DCACHE_CLEAN_INVAL_RANGE:
+ v7_dcache_clean_inval_range(start, stop, line_len);
+ break;
+ case ARMV7_DCACHE_INVAL_RANGE:
+ v7_dcache_inval_range(start, stop, line_len);
+ break;
+ }
+
+ /* DMB to make sure the operation is complete */
+ CP15DMB;
+}
+
+/* Invalidate TLB */
+static void v7_inval_tlb(void)
+{
+ /* Invalidate entire unified TLB */
+ asm volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+ /* Invalidate entire data TLB */
+ asm volatile ("mcr p15, 0, %0, c8, c6, 0" : : "r" (0));
+ /* Invalidate entire instruction TLB */
+ asm volatile ("mcr p15, 0, %0, c8, c5, 0" : : "r" (0));
+ /* Full system DSB - make sure that the invalidation is complete */
+ CP15DSB;
+ /* Full system ISB - make sure the instruction stream sees it */
+ CP15ISB;
+}
+
+void invalidate_dcache_all(void)
+{
+ v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL);
+
+ v7_outer_cache_inval_all();
+}
+
+/*
+ * Performs a clean & invalidation of the entire data cache
+ * at all levels
+ */
+void flush_dcache_all(void)
+{
+ v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL);
+
+ v7_outer_cache_flush_all();
+}
+
+/*
+ * Invalidates range in all levels of D-cache/unified cache used:
+ * Affects the range [start, stop - 1]
+ */
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+
+ v7_dcache_maint_range(start, stop, ARMV7_DCACHE_INVAL_RANGE);
+
+ v7_outer_cache_inval_range(start, stop);
+}
+
+/*
+ * Flush range(clean & invalidate) from all levels of D-cache/unified
+ * cache used:
+ * Affects the range [start, stop - 1]
+ */
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ v7_dcache_maint_range(start, stop, ARMV7_DCACHE_CLEAN_INVAL_RANGE);
+
+ v7_outer_cache_flush_range(start, stop);
+}
+
+void arm_init_before_mmu(void)
+{
+ v7_outer_cache_enable();
+ invalidate_dcache_all();
+ v7_inval_tlb();
+}
+
+/*
+ * Flush range from all levels of d-cache/unified-cache used:
+ * Affects the range [start, start + size - 1]
+ */
+void flush_cache(unsigned long start, unsigned long size)
+{
+ flush_dcache_range(start, start + size);
+}
+#else /* #ifndef CONFIG_SYS_NO_DCACHE */
+void invalidate_dcache_all(void)
+{
+}
+
+void flush_dcache_all(void)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void arm_init_before_mmu(void)
+{
+}
+
+void flush_cache(unsigned long start, unsigned long size)
+{
+}
+#endif /* #ifndef CONFIG_SYS_NO_DCACHE */
+
+#ifndef CONFIG_SYS_NO_ICACHE
+/* Invalidate entire I-cache and branch predictor array */
+void invalidate_icache_all(void)
+{
+ /*
+ * Invalidate all instruction caches to PoU.
+ * Also flushes branch target cache.
+ */
+ asm volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+
+ /* Invalidate entire branch predictor array */
+ asm volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+
+ /* Full system DSB - make sure that the invalidation is complete */
+ CP15DSB;
+
+ /* ISB - make sure the instruction stream sees it */
+ CP15ISB;
+}
+#else
+void invalidate_icache_all(void)
+{
+}
+#endif
+
+/*
+ * Stub implementations for outer cache operations
+ */
+void __v7_outer_cache_enable(void)
+{
+}
+void v7_outer_cache_enable(void)
+ __attribute__((weak, alias("__v7_outer_cache_enable")));
+
+void __v7_outer_cache_disable(void)
+{
+}
+void v7_outer_cache_disable(void)
+ __attribute__((weak, alias("__v7_outer_cache_disable")));
+
+void __v7_outer_cache_flush_all(void)
+{
+}
+void v7_outer_cache_flush_all(void)
+ __attribute__((weak, alias("__v7_outer_cache_flush_all")));
+
+void __v7_outer_cache_inval_all(void)
+{
+}
+void v7_outer_cache_inval_all(void)
+ __attribute__((weak, alias("__v7_outer_cache_inval_all")));
+
+void __v7_outer_cache_flush_range(u32 start, u32 end)
+{
+}
+void v7_outer_cache_flush_range(u32 start, u32 end)
+ __attribute__((weak, alias("__v7_outer_cache_flush_range")));
+
+void __v7_outer_cache_inval_range(u32 start, u32 end)
+{
+}
+void v7_outer_cache_inval_range(u32 start, u32 end)
+ __attribute__((weak, alias("__v7_outer_cache_inval_range")));
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
new file mode 100644
index 0000000..50cc167
--- /dev/null
+++ b/arch/arm/include/asm/armv7.h
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef ARMV7_H
+#define ARMV7_H
+#include <linux/types.h>
+
+/* CCSIDR */
+#define CCSIDR_LINE_SIZE_OFFSET 0
+#define CCSIDR_LINE_SIZE_MASK 0x7
+#define CCSIDR_ASSOCIATIVITY_OFFSET 3
+#define CCSIDR_ASSOCIATIVITY_MASK (0x3FF << 3)
+#define CCSIDR_NUM_SETS_OFFSET 13
+#define CCSIDR_NUM_SETS_MASK (0x7FFF << 13)
+
+/*
+ * Values for InD field in CSSELR
+ * Selects the type of cache
+ */
+#define ARMV7_CSSELR_IND_DATA_UNIFIED 0
+#define ARMV7_CSSELR_IND_INSTRUCTION 1
+
+/* Values for Ctype fields in CLIDR */
+#define ARMV7_CLIDR_CTYPE_NO_CACHE 0
+#define ARMV7_CLIDR_CTYPE_INSTRUCTION_ONLY 1
+#define ARMV7_CLIDR_CTYPE_DATA_ONLY 2
+#define ARMV7_CLIDR_CTYPE_INSTRUCTION_DATA 3
+#define ARMV7_CLIDR_CTYPE_UNIFIED 4
+
+/*
+ * CP15 Barrier instructions
+ * Please note that we have separate barrier instructions in ARMv7
+ * However, we use the CP15 based instructtions because we use
+ * -march=armv5 in U-Boot
+ */
+#define CP15ISB asm volatile ("mcr p15, 0, %0, c7, c5, 4" : : "r" (0))
+#define CP15DSB asm volatile ("mcr p15, 0, %0, c7, c10, 4" : : "r" (0))
+#define CP15DMB asm volatile ("mcr p15, 0, %0, c7, c10, 5" : : "r" (0))
+
+void v7_outer_cache_enable(void);
+void v7_outer_cache_disable(void);
+void v7_outer_cache_flush_all(void);
+void v7_outer_cache_inval_all(void);
+void v7_outer_cache_flush_range(u32 start, u32 end);
+void v7_outer_cache_inval_range(u32 start, u32 end);
+
+#endif
diff --git a/include/common.h b/include/common.h
index 00e266e..4f47ef6 100644
--- a/include/common.h
+++ b/include/common.h
@@ -413,6 +413,7 @@ void icache_disable(void);
int dcache_status (void);
void dcache_enable (void);
void dcache_disable(void);
+void mmu_disable(void);
void relocate_code (ulong, gd_t *, ulong) __attribute__ ((noreturn));
ulong get_endaddr (void);
void trap_init (ulong);
@@ -614,9 +615,11 @@ ulong video_setmem (ulong);
/* arch/$(ARCH)/lib/cache.c */
void flush_cache (unsigned long, unsigned long);
+void flush_dcache_all(void);
void flush_dcache_range(unsigned long start, unsigned long stop);
void invalidate_dcache_range(unsigned long start, unsigned long stop);
-
+void invalidate_dcache_all(void);
+void invalidate_icache_all(void);
/* arch/$(ARCH)/lib/ticks.S */
unsigned long long get_ticks(void);
--
1.7.0.4
next prev parent reply other threads:[~2011-05-12 12:11 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-08 13:07 [U-Boot] [PATCH v2 00/10] armv7: cache maintenance operations Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 01/10] arm: make default implementation of cache_flush() weakly linked Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 02/10] armv7: add miscellaneous utility macros Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 03/10] armv7: cache maintenance operations for armv7 Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 04/10] armv7: replace CONFIG_L2_OFF with CONFIG_SYS_NO_L2CACHE Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 05/10] armv7: integrate cache maintenance support Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 06/10] arm: minor fixes for cache and mmu handling Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 07/10] armv7: add PL310 support to u-boot Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 08/10] armv7: adapt omap4 to the new cache maintenance framework Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 09/10] armv7: adapt omap3 " Aneesh V
2011-03-08 13:07 ` [U-Boot] [PATCH v2 10/10] armv7: adapt s5pc1xx " Aneesh V
2011-04-27 1:05 ` [U-Boot] [PATCH v2 00/10] armv7: cache maintenance operations Simon Glass
2011-05-05 4:48 ` Simon Glass
2011-05-10 10:25 ` Aneesh V
2011-05-12 12:11 ` [U-Boot] [PATCH v3 " Aneesh V
2011-05-12 12:11 ` [U-Boot] [PATCH v3 01/10] arm: make default implementation of cache_flush() weakly linked Aneesh V
2011-05-12 12:11 ` [U-Boot] [PATCH v3 02/10] armv7: add miscellaneous utility macros Aneesh V
2011-05-15 18:44 ` Wolfgang Denk
2011-05-15 22:15 ` Simon Glass
2011-05-16 2:23 ` Eric Cooper
2011-05-16 14:50 ` Simon Glass
2011-05-16 15:52 ` Wolfgang Denk
2011-05-16 5:51 ` Wolfgang Denk
2011-05-17 3:47 ` Simon Glass
2011-05-17 5:27 ` Wolfgang Denk
2011-05-17 8:44 ` Aneesh V
2011-05-17 9:27 ` Wolfgang Denk
2011-05-31 7:54 ` V, Aneesh
2011-06-01 2:13 ` Simon Glass
2011-06-01 6:01 ` Aneesh V
2011-05-16 15:07 ` Aneesh V
2011-06-06 15:57 ` Aneesh V
2011-06-06 18:50 ` Wolfgang Denk
2011-06-07 9:01 ` Aneesh V
2011-06-07 10:39 ` Wolfgang Denk
2011-06-07 12:14 ` Aneesh V
2011-06-07 15:19 ` Simon Glass
2011-06-07 15:40 ` Wolfgang Denk
2011-06-08 11:53 ` Aneesh V
2011-06-08 21:41 ` Wolfgang Denk
2011-06-14 8:45 ` Aneesh V
2011-06-14 10:51 ` Wolfgang Denk
2011-06-14 11:39 ` Aneesh V
2011-06-14 13:53 ` Wolfgang Denk
2011-06-14 15:11 ` Simon Glass
2011-06-14 18:54 ` Wolfgang Denk
2011-06-15 15:19 ` Simon Glass
2011-06-15 8:48 ` Aneesh V
2011-06-15 9:20 ` Wolfgang Denk
2011-06-15 11:01 ` Aneesh V
2011-06-15 12:04 ` Wolfgang Denk
2011-06-15 12:42 ` Graeme Russ
2011-06-15 12:51 ` Wolfgang Denk
2011-06-15 13:03 ` Graeme Russ
2011-06-16 11:07 ` Graeme Russ
2011-06-16 11:46 ` Wolfgang Denk
2011-06-16 23:58 ` Graeme Russ
2011-06-16 5:39 ` Aneesh V
2011-06-16 6:19 ` Graeme Russ
2011-06-16 8:15 ` Wolfgang Denk
2011-06-16 11:10 ` Graeme Russ
2011-05-12 12:11 ` Aneesh V [this message]
2011-05-15 18:51 ` [U-Boot] [PATCH v3 03/10] armv7: cache maintenance operations for armv7 Wolfgang Denk
2011-05-17 9:17 ` Aneesh V
2011-05-17 9:31 ` Wolfgang Denk
2011-05-17 9:37 ` Aneesh V
2011-05-17 9:58 ` Aneesh V
2011-06-16 14:17 ` Simon Glass
2011-05-12 12:11 ` [U-Boot] [PATCH v3 04/10] armv7: replace CONFIG_L2_OFF with CONFIG_SYS_NO_L2CACHE Aneesh V
2011-05-15 18:53 ` Wolfgang Denk
2011-05-17 9:59 ` Aneesh V
2011-05-17 11:09 ` Wolfgang Denk
2011-06-06 11:39 ` Aneesh V
2011-06-15 10:13 ` Wolfgang Denk
2011-05-12 12:11 ` [U-Boot] [PATCH v3 05/10] armv7: integrate cache maintenance support Aneesh V
2011-05-15 18:55 ` Wolfgang Denk
2011-05-17 10:20 ` Aneesh V
2011-05-17 11:14 ` Wolfgang Denk
2011-05-17 12:06 ` Aneesh V
2011-05-17 12:28 ` Wolfgang Denk
2011-05-17 13:28 ` Aneesh V
2011-05-17 21:37 ` Wolfgang Denk
2011-05-12 12:11 ` [U-Boot] [PATCH v3 06/10] arm: minor fixes for cache and mmu handling Aneesh V
2011-05-12 12:11 ` [U-Boot] [PATCH v3 07/10] armv7: add PL310 support to u-boot Aneesh V
2011-05-12 12:11 ` [U-Boot] [PATCH v3 08/10] armv7: adapt omap4 to the new cache maintenance framework Aneesh V
2011-05-15 18:57 ` Wolfgang Denk
2011-05-12 12:11 ` [U-Boot] [PATCH v3 09/10] armv7: adapt omap3 " Aneesh V
2011-05-15 18:58 ` Wolfgang Denk
2011-05-12 12:11 ` [U-Boot] [PATCH v3 10/10] armv7: adapt s5pc1xx " Aneesh V
2011-05-15 18:59 ` Wolfgang Denk
2011-06-17 9:30 ` [U-Boot] [PATCH v4 0/9] armv7: cache maintenance operations Aneesh V
2011-06-22 17:41 ` Albert ARIBAUD
2011-06-23 5:57 ` V, Aneesh
2011-06-23 19:24 ` Paulraj, Sandeep
2011-06-28 1:44 ` Minkyu Kang
2011-06-28 5:41 ` Albert ARIBAUD
2011-06-17 9:30 ` [U-Boot] [PATCH v4 1/9] arm: make default implementation of cache_flush() weakly linked Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 2/9] armv7: cache maintenance operations for armv7 Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 3/9] armv7: rename cache related CONFIG flags Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 4/9] armv7: integrate cache maintenance support Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 5/9] arm: minor fixes for cache and mmu handling Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 6/9] armv7: add PL310 support to u-boot Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 7/9] armv7: adapt omap4 to the new cache maintenance framework Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 8/9] armv7: adapt omap3 " Aneesh V
2011-06-17 9:30 ` [U-Boot] [PATCH v4 9/9] armv7: adapt s5pc1xx " Aneesh V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305202276-27784-4-git-send-email-aneesh@ti.com \
--to=aneesh@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox