From: Simon Schwarz <simonschwarzcor@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V7 5/7] spl: Add POWER library to new spl
Date: Fri, 29 Jul 2011 18:53:39 +0200 [thread overview]
Message-ID: <1311958421-9607-6-git-send-email-simonschwarzcor@gmail.com> (raw)
In-Reply-To: <1311958421-9607-1-git-send-email-simonschwarzcor@gmail.com>
Adds power library to the new spl
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
---
Didn't exist before V7
---
doc/README.SPL | 1 +
spl/Makefile | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/doc/README.SPL b/doc/README.SPL
index ef946ce..2987f43 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -60,4 +60,5 @@ CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o)
CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o)
CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o)
+CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o)
CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
diff --git a/spl/Makefile b/spl/Makefile
index 17d4f7f..0c0d3c4 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -46,6 +46,7 @@ LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o
LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o
LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
+LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o
LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
ifeq ($(SOC),omap3)
--
1.7.4.1
next prev parent reply other threads:[~2011-07-29 16:53 UTC|newest]
Thread overview: 134+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-28 14:14 [U-Boot] [0/5]devkit8000 nand_spl support simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [1/5]devkit8000 nand_spl: armv7 support nand_spl boot simonschwarzcor at googlemail.com
2011-06-29 8:27 ` Andreas Bießmann
2011-06-30 11:10 ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [2/5]devkit8000 nand_spl: omap3 " simonschwarzcor at googlemail.com
2011-06-29 8:43 ` Andreas Bießmann
2011-06-30 9:06 ` Simon Schwarz
2011-06-30 10:38 ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [3/5]devkit8000 nand_spl: Add RAM configuration independent of x-loader or CH simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [4/5]devkit8000 nand_spl: Add SPL NAND support to omap_gpmc driver simonschwarzcor at googlemail.com
2011-06-29 8:58 ` Andreas Bießmann
2011-06-30 11:01 ` Simon Schwarz
2011-06-28 14:14 ` [U-Boot] [5/5]devkit8000 nand_spl: add nand_spl support simonschwarzcor at googlemail.com
2011-06-28 15:01 ` Andreas Bießmann
2011-07-25 18:05 ` [U-Boot] [PATCH V2 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 6:07 ` Andreas Bießmann
2011-07-26 8:42 ` Simon Schwarz
2011-07-28 6:20 ` Aneesh V
2011-07-25 18:05 ` [U-Boot] [PATCH V2 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 5:59 ` Andreas Bießmann
2011-07-26 8:47 ` Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 6:11 ` Andreas Bießmann
2011-07-25 18:05 ` [U-Boot] [PATCH V2 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26 6:17 ` Andreas Bießmann
2011-07-26 9:09 ` Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26 10:42 ` Andreas Bießmann
2011-07-26 12:34 ` Simon Schwarz
2011-07-26 11:04 ` Wolfgang Denk
2011-07-26 11:06 ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Wolfgang Denk
2011-07-26 12:31 ` Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 " Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 18:06 ` Scott Wood
[not found] ` <4E2FCF6E.10701@gmail.com>
[not found] ` <20110727163839.736d5bed@schlenkerla.am.freescale.net>
2011-07-28 7:51 ` Simon Schwarz
2011-07-28 18:56 ` Scott Wood
2011-07-29 8:48 ` Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 18:04 ` Scott Wood
2011-07-26 18:12 ` Scott Wood
2011-07-27 9:22 ` Simon Schwarz
2011-07-27 14:55 ` V, Aneesh
2011-07-27 22:01 ` Scott Wood
2011-07-28 7:27 ` Aneesh V
2011-07-26 12:09 ` [U-Boot] [PATCH V4 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-28 8:50 ` Aneesh V
2011-07-28 9:42 ` Simon Schwarz
2011-07-29 16:53 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-28 9:42 ` Aneesh V
2011-07-28 12:44 ` Simon Schwarz
2011-07-28 14:24 ` Aneesh V
2011-07-28 14:34 ` Simon Schwarz
2011-08-02 12:03 ` Simon Schwarz
2011-08-02 12:18 ` Aneesh V
2011-08-02 12:30 ` Simon Schwarz
2011-07-28 9:58 ` Aneesh V
2011-07-28 12:54 ` Simon Schwarz
2011-07-28 14:16 ` Aneesh V
2011-07-28 18:50 ` Scott Wood
2011-07-28 19:07 ` Wolfgang Denk
2011-07-29 7:34 ` Aneesh V
2011-07-29 8:19 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-28 11:54 ` Aneesh V
2011-07-28 14:04 ` Simon Schwarz
2011-07-28 16:18 ` Aneesh V
2011-07-29 12:17 ` Simon Schwarz
2011-07-28 19:16 ` Scott Wood
2011-07-29 9:12 ` Simon Schwarz
2011-07-29 9:27 ` Wolfgang Denk
2011-07-29 12:27 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28 10:51 ` Aneesh V
2011-07-28 11:54 ` Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 1/7] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 2/7] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 3/7] omap-common: add nand spl support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 4/7] spl: add NAND Library to new SPL Simon Schwarz
2011-08-01 17:58 ` Scott Wood
2011-08-02 8:15 ` Simon Schwarz
2011-07-29 16:53 ` Simon Schwarz [this message]
2011-07-29 16:53 ` [U-Boot] [PATCH V7 6/7] omap3: new SPL structure support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 7/7] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-01 16:23 ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 0/9] " Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-05 7:30 ` Aneesh V
2011-08-08 7:50 ` Simon Schwarz
2011-08-08 9:04 ` Aneesh V
2011-08-02 15:59 ` [U-Boot] [PATCH V8 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-02 16:12 ` Scott Wood
2011-08-02 15:59 ` [U-Boot] [PATCH V8 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-05 7:41 ` Aneesh V
2011-08-08 8:03 ` Simon Schwarz
2011-08-08 8:44 ` Aneesh V
2011-08-08 10:59 ` Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 9/9] omap-common: reorganize spl.c Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 0/9] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-08 23:34 ` Scott Wood
2011-08-08 13:11 ` [U-Boot] [PATCH V9 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 9/9] omap-common: reorganize spl.c Simon Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311958421-9607-6-git-send-email-simonschwarzcor@gmail.com \
--to=simonschwarzcor@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox