From: Reinhard Meyer <u-boot@emk-elektronik.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
Date: Tue, 02 Aug 2011 12:37:41 +0000 [thread overview]
Message-ID: <1312288661.31913.66.camel@ubuntu> (raw)
./MAKEALL at91
--------------------- SUMMARY ----------------------------
Boards compiled: 48
Boards with warnings or errors: 11 ( at91cap9adk meesc meesc_dataflash
pm9261 pm9263 at91sam9263ek at91sam9m10g45ek pm9g45 SBC35_A9G20
TNY_A9260 TNY_A9G20 )
----------------------------------------------------------
Verbose output of broken boards:
Configuring for at91cap9adk board...
at91cap9_devices.c:33:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
clock.c:21:3: error: #error You need to define CONFIG_AT91FAMILY in your
board config!
timer.c:34:3: error: #error You need to define CONFIG_AT91FAMILY in your
board config!
make[1]: *** Keine Regel vorhanden, um das Target ?.depend?,
ben?tigt von ?all?, zu erstellen. Schluss.
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for meesc - Board: meesc, Options:
AT91SAM9263,SYS_USE_NANDFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for meesc_dataflash - Board: meesc, Options:
AT91SAM9263,SYS_USE_DATAFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9261 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9261_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9261_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9261_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9263 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for at91sam9263ek board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for at91sam9m10g45ek board...
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9m10g45ek.h:36:0: note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9g45 board...
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9g45.h:35:0:
note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for SBC35_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/sbc35_a9g20.h:47:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for TNY_A9260 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for TNY_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Best Regards,
Reinhard
next reply other threads:[~2011-08-02 12:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-02 12:37 Reinhard Meyer [this message]
2011-08-02 13:23 ` [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011 Thomas Petazzoni
2011-08-02 13:36 ` Reinhard Meyer
2011-08-03 2:08 ` Hong Xu
2011-08-03 7:37 ` Thomas Petazzoni
2011-08-03 7:43 ` Reinhard Meyer
2011-08-04 7:52 ` Matthias Fuchs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312288661.31913.66.camel@ubuntu \
--to=u-boot@emk-elektronik.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox