[U-Boot] [U-Boot, AT91, rework] pm9261: compiles with the AT91 reworked scheme

[U-Boot] [U-Boot, AT91, rework] pm9261: compiles with the AT91 reworked scheme

[Reinhard Meyer]

Dear Asen Dimov,

oddly I don't have the original e-Mail im my Inbox, but the patch was in
patchwork:

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>

---
Note:
This patch was a part of patches, but it is better to be done step by
step and
so this patch is a split from the patch series with message id:
<1307606409-29818-3-git-send-email-dimov@ronetix.at>
and Patchwork:
http://patchwork.ozlabs.org/patch/99666/

Changes for v2:
	- rename at91_serial_hw_init() to at91_seriald_hw_init()

checkpatch complains at "board/ronetix/pm9261/pm9261.c:148", but
checkpatch could be mistaken.

 board/ronetix/pm9261/led.c    |    9 ++++-----
 board/ronetix/pm9261/pm9261.c |   38
++++++++++++++++++--------------------
 boards.cfg                    |    2 +-
 include/configs/pm9261.h      |   18 ++++++++++--------
 4 files changed, 33 insertions(+), 34 deletions(-)

Applied cleanly,

Configuring for pm9261 - Board: pm9261, Options: AT91SAM9261
   text	   data	    bss	    dec	    hex	filename
 211233	  10948	  72416	 294597	  47ec5	./u-boot

Board removal for pm9261 marked "Non Applicable".

Best Regards,
Reinhard