[U-Boot] [PATCH 2/2] atmel: Update support of board AT91SAM9M10G45-EK to new style

[Reinhard Meyer <u-boot@emk-elektronik.de>]

Dear Thomas Petazzoni,
> Based on earlier work by Alex Waterman <awaterman@dawning.com>.
> 
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
>  Makefile                                        |   21 ---
>  board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c |  114 +++++++------
>  board/atmel/at91sam9m10g45ek/led.c              |    6 +-
>  boards.cfg                                      |    1 +
>  include/configs/at91sam9m10g45ek.h              |  193 ++++++++++-------------
>  5 files changed, 154 insertions(+), 181 deletions(-)
Removal of board from MAKEALL missing...

Configuring for at91sam9m10g45ek_nandflash - Board: at91sam9m10g45ek,
Options: AT91SAM9M10G45,SYS_USE_NANDFLASH
at91sam9m10g45ek.c: In function ?board_early_init_f?:
at91sam9m10g45ek.c:256:1: warning: control reaches end of non-void
function
   text	   data	    bss	    dec	    hex	filename
 201534	  32116	  71760	 305410	  4a902	./u-boot

AND this board's early_init_f is quite different from the other atmel
boards, also the place of calling at91_seriald_hw_init() is different
from them.
Please verify that this is OK.

Thanks,
Reinhard