From: Simon Schwarz <simonschwarzcor@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V9 0/9] OMAP3 and devkit8000 SPL support
Date: Mon, 8 Aug 2011 15:11:49 +0200 [thread overview]
Message-ID: <1312809118-5817-1-git-send-email-simonschwarzcor@gmail.com> (raw)
In-Reply-To: <1312300757-9039-1-git-send-email-simonschwarzcor@gmail.com>
V1 Initial SPL support for OMAP3 was based on the old SPL
V2 Introduced major changes. It is based on the OMAP4-SPL patch by
Aneesh V and the new SPL Framework by Daniel Schwierzeck and Aneesh V
V3 Some small bug fixes and correct placed SOB.
V4 Corrected one bugfix and some style problems
V5 Exclude some nand objects from SPL, interface change for nand_spl
V6 Added nand_spl.c - git add mistake, some small changes
V7 integrates "[PATCH V0] omap-common: move early UART clock setup to
board.c", rewrite of image loading to use image headers, removed many
#ifdefs, use read functions from nand_base.c, some smaller changes
V8 added boot parameter saving (was not implemented before V8!), added define
CONFIG_SPL_NAND_SIMPLE, reorganization of omap-common SPL
V9 added missing file. Changes in boot_mode
This is based on the following patches:
- New SPL framework (in u-boot-ti)
- OMAP4 SPL (in u-boot-ti)
Simon Schwarz (9):
omap-common/omap4: relocate early UART clock setup
omap3: Configure RAM bank 0 if in SPL
omap-common: add nand spl support
spl: add NAND Library to new SPL
spl: Add POWER library to new spl
omap3: new SPL structure support
devkit8000: Add nand-spl support for new SPL
omap3: implement boot parameter saving
omap-common: reorganize spl.c
arch/arm/cpu/armv7/omap-common/Makefile | 6 +
arch/arm/cpu/armv7/omap-common/spl.c | 165 +++---------------
arch/arm/cpu/armv7/omap-common/spl_mmc.c | 150 ++++++++++++++++
arch/arm/cpu/armv7/omap-common/spl_nand.c | 71 ++++++++
arch/arm/cpu/armv7/omap3/board.c | 50 ++++++-
arch/arm/cpu/armv7/omap3/config.mk | 30 ++++
arch/arm/cpu/armv7/omap3/lowlevel_init.S | 10 +
arch/arm/cpu/armv7/omap3/sdrc.c | 32 ++++-
arch/arm/cpu/armv7/omap4/board.c | 1 +
arch/arm/include/asm/arch-omap3/mem.h | 36 ++++
arch/arm/include/asm/arch-omap3/sys_proto.h | 1 +
arch/arm/include/asm/omap_common.h | 31 ++++
board/timll/devkit8000/devkit8000.c | 2 +-
doc/README.SPL | 2 +
drivers/mtd/nand/Makefile | 10 +-
drivers/mtd/nand/nand_base.c | 4 +-
drivers/mtd/nand/nand_spl_simple.c | 245 +++++++++++++++++++++++++++
drivers/mtd/nand/omap_gpmc.c | 27 +++
include/configs/devkit8000.h | 46 +++++
include/nand.h | 6 +
spl/Makefile | 2 +
21 files changed, 782 insertions(+), 145 deletions(-)
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_mmc.c
create mode 100644 arch/arm/cpu/armv7/omap-common/spl_nand.c
create mode 100644 arch/arm/cpu/armv7/omap3/config.mk
create mode 100644 drivers/mtd/nand/nand_spl_simple.c
--
1.7.4.1
next prev parent reply other threads:[~2011-08-08 13:11 UTC|newest]
Thread overview: 134+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-28 14:14 [U-Boot] [0/5]devkit8000 nand_spl support simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [1/5]devkit8000 nand_spl: armv7 support nand_spl boot simonschwarzcor at googlemail.com
2011-06-29 8:27 ` Andreas Bießmann
2011-06-30 11:10 ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [2/5]devkit8000 nand_spl: omap3 " simonschwarzcor at googlemail.com
2011-06-29 8:43 ` Andreas Bießmann
2011-06-30 9:06 ` Simon Schwarz
2011-06-30 10:38 ` Aneesh V
2011-06-28 14:14 ` [U-Boot] [3/5]devkit8000 nand_spl: Add RAM configuration independent of x-loader or CH simonschwarzcor at googlemail.com
2011-06-28 14:14 ` [U-Boot] [4/5]devkit8000 nand_spl: Add SPL NAND support to omap_gpmc driver simonschwarzcor at googlemail.com
2011-06-29 8:58 ` Andreas Bießmann
2011-06-30 11:01 ` Simon Schwarz
2011-06-28 14:14 ` [U-Boot] [5/5]devkit8000 nand_spl: add nand_spl support simonschwarzcor at googlemail.com
2011-06-28 15:01 ` Andreas Bießmann
2011-07-25 18:05 ` [U-Boot] [PATCH V2 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 6:07 ` Andreas Bießmann
2011-07-26 8:42 ` Simon Schwarz
2011-07-28 6:20 ` Aneesh V
2011-07-25 18:05 ` [U-Boot] [PATCH V2 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 5:59 ` Andreas Bießmann
2011-07-26 8:47 ` Simon Schwarz
2011-07-25 18:05 ` [U-Boot] [PATCH V2 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 6:11 ` Andreas Bießmann
2011-07-25 18:05 ` [U-Boot] [PATCH V2 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26 6:17 ` Andreas Bießmann
2011-07-26 9:09 ` Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 10:22 ` [U-Boot] [PATCH V3 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-26 10:42 ` Andreas Bießmann
2011-07-26 12:34 ` Simon Schwarz
2011-07-26 11:04 ` Wolfgang Denk
2011-07-26 11:06 ` [U-Boot] [PATCH V3 0/5] OMAP3 and devkit8000 SPL support Wolfgang Denk
2011-07-26 12:31 ` Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 " Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-26 18:06 ` Scott Wood
[not found] ` <4E2FCF6E.10701@gmail.com>
[not found] ` <20110727163839.736d5bed@schlenkerla.am.freescale.net>
2011-07-28 7:51 ` Simon Schwarz
2011-07-28 18:56 ` Scott Wood
2011-07-29 8:48 ` Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-26 18:04 ` Scott Wood
2011-07-26 18:12 ` Scott Wood
2011-07-27 9:22 ` Simon Schwarz
2011-07-27 14:55 ` V, Aneesh
2011-07-27 22:01 ` Scott Wood
2011-07-28 7:27 ` Aneesh V
2011-07-26 12:09 ` [U-Boot] [PATCH V4 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-26 12:09 ` [U-Boot] [PATCH V4 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-27 12:50 ` [U-Boot] [PATCH V5 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 0/5] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 1/5] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-28 8:50 ` Aneesh V
2011-07-28 9:42 ` Simon Schwarz
2011-07-29 16:53 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 2/5] omap-common: add nand spl support Simon Schwarz
2011-07-28 9:42 ` Aneesh V
2011-07-28 12:44 ` Simon Schwarz
2011-07-28 14:24 ` Aneesh V
2011-07-28 14:34 ` Simon Schwarz
2011-08-02 12:03 ` Simon Schwarz
2011-08-02 12:18 ` Aneesh V
2011-08-02 12:30 ` Simon Schwarz
2011-07-28 9:58 ` Aneesh V
2011-07-28 12:54 ` Simon Schwarz
2011-07-28 14:16 ` Aneesh V
2011-07-28 18:50 ` Scott Wood
2011-07-28 19:07 ` Wolfgang Denk
2011-07-29 7:34 ` Aneesh V
2011-07-29 8:19 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 3/5] nand spl: add NAND Library to new SPL Simon Schwarz
2011-07-28 11:54 ` Aneesh V
2011-07-28 14:04 ` Simon Schwarz
2011-07-28 16:18 ` Aneesh V
2011-07-29 12:17 ` Simon Schwarz
2011-07-28 19:16 ` Scott Wood
2011-07-29 9:12 ` Simon Schwarz
2011-07-29 9:27 ` Wolfgang Denk
2011-07-29 12:27 ` Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 4/5] omap3: new SPL structure support Simon Schwarz
2011-07-28 8:38 ` [U-Boot] [PATCH V6 5/5] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-07-28 10:51 ` Aneesh V
2011-07-28 11:54 ` Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 1/7] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 2/7] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 3/7] omap-common: add nand spl support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 4/7] spl: add NAND Library to new SPL Simon Schwarz
2011-08-01 17:58 ` Scott Wood
2011-08-02 8:15 ` Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 5/7] spl: Add POWER library to new spl Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 6/7] omap3: new SPL structure support Simon Schwarz
2011-07-29 16:53 ` [U-Boot] [PATCH V7 7/7] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-01 16:23 ` [U-Boot] [PATCH V7 0/7] OMAP3 and devkit8000 SPL support Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 0/9] " Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-05 7:30 ` Aneesh V
2011-08-08 7:50 ` Simon Schwarz
2011-08-08 9:04 ` Aneesh V
2011-08-02 15:59 ` [U-Boot] [PATCH V8 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-02 16:12 ` Scott Wood
2011-08-02 15:59 ` [U-Boot] [PATCH V8 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-05 7:41 ` Aneesh V
2011-08-08 8:03 ` Simon Schwarz
2011-08-08 8:44 ` Aneesh V
2011-08-08 10:59 ` Simon Schwarz
2011-08-02 15:59 ` [U-Boot] [PATCH V8 9/9] omap-common: reorganize spl.c Simon Schwarz
2011-08-08 13:11 ` Simon Schwarz [this message]
2011-08-08 13:11 ` [U-Boot] [PATCH V9 1/9] omap-common/omap4: relocate early UART clock setup Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 2/9] omap3: Configure RAM bank 0 if in SPL Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 3/9] omap-common: add nand spl support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 4/9] spl: add NAND Library to new SPL Simon Schwarz
2011-08-08 23:34 ` Scott Wood
2011-08-08 13:11 ` [U-Boot] [PATCH V9 5/9] spl: Add POWER library to new spl Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 6/9] omap3: new SPL structure support Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 7/9] devkit8000: Add nand-spl support for new SPL Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 8/9] omap3: implement boot parameter saving Simon Schwarz
2011-08-08 13:11 ` [U-Boot] [PATCH V9 9/9] omap-common: reorganize spl.c Simon Schwarz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312809118-5817-1-git-send-email-simonschwarzcor@gmail.com \
--to=simonschwarzcor@googlemail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox