[U-Boot] Urgent : Regd. Cortex A9 quad core versatile express ca9x4_ct_vxp support in U-Boot..

[Sandeep Kumar <sandeep.kumar@open-silicon.com>]

Hi Matt,

We are in a process of developing a SoC around cortex a9 quad core
versatile express. For that we made changes in the U-Boot. Is there any
way (like any simulator/emulator which supports this board) to validate
the changes before getting the arm board itself.

Any kind of help is highly appreciated.

-- 
Thanks and Regards,
Sandeep Kumar 

On Sun, 2011-08-21 at 22:17 -0600, Matt Waddel wrote:

> Hi Sandeep,
> 
> On 08/21/2011 12:37 AM, Sandeep Kumar wrote:
> > Hi all,
> > 
> > I am trying to use U-Boot for cortex A9 quad core versatile express board. I saw that the support is already added
> > for that board but i am not able to find out the DDR initialization code
> > anywhere before using the stack. In fact i didn't find the DDR
> > initialization code anywhere for this board. This board also comes along
> > with a CLCD (color LCD) controller which is also not initialized
> > anywhere for this board. Is the support for this board is tested as
> > without initializing the DDR how the code relocation and execution from
> > DDR is possible.
> 
> Sorry for not responding sooner.
> 
> Currently the DDR setup is handled by the ARM boot monitor code
> and u-boot runs as the 2nd stage bootloader. So DDR setup is
> not done in u-boot.
> 
> Also, the CLCD is not setup in u-boot.
> 
> --Matt
> 
> > 
> > Any kind of pointers will be very helpful.
> > 
> > 
> > 
> > 
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot