From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] powerpc/85xx: Add workaround for erratum CPU-A011 on e500mc cores
Date: Sat, 27 Aug 2011 06:03:52 -0500 [thread overview]
Message-ID: <1314443032-2811-1-git-send-email-galak@kernel.crashing.org> (raw)
Issue:
CoreNet bad data signal is not sent with shared data from L1 Data Cache
when it has an error
Workaround:
Run in write-shadow mode by setting L1CSR2[DCWS] = 1
By default we do NOT enable this, thus we have #undef in
config_mpc85xx.h for this erratum.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +++
arch/powerpc/cpu/mpc85xx/cpu_init.c | 3 ++-
arch/powerpc/cpu/mpc85xx/release.S | 3 ++-
arch/powerpc/include/asm/config_mpc85xx.h | 3 +++
4 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 49f03f1..47bb0d2 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -53,6 +53,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
puts("Work-around for Erratum CPU22 enabled\n");
#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_CPU_E500MC_A011)
+ puts("Work-around for Erratum CPU-A011 enabled\n");
+#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
puts("Work-around for DDR MSYNC_IN Erratum enabled\n");
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index f1ab28b..a32cada 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -305,7 +305,8 @@ int cpu_init_r(void)
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
#endif
-#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
+#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_CPU_E500MC_A011)
flush_dcache();
mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
sync();
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 6678ed4..272b3e6 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -137,7 +137,8 @@ __secondary_start_page:
mtspr L1CSR2,r8
#endif
-#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
+#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_CPU_E500MC_A011)
mfspr r8,L1CSR2
oris r8,r8,(L1CSR2_DCWS)@h
mtspr L1CSR2,r8
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index ff93367..484654c 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -311,6 +311,7 @@
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#undef CONFIG_SYS_FSL_ERRATUM_CPU_E500MC_A011
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_USBxx
@@ -330,6 +331,7 @@
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#undef CONFIG_SYS_FSL_ERRATUM_CPU_E500MC_A011
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_USBxx
@@ -349,6 +351,7 @@
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#undef CONFIG_SYS_FSL_ERRATUM_CPU_E500MC_A011
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_USBxx
--
1.7.3.4
next reply other threads:[~2011-08-27 11:03 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-27 11:03 Kumar Gala [this message]
2011-08-27 11:36 ` [U-Boot] [PATCH] powerpc/85xx: Add workaround for erratum CPU-A011 on e500mc cores Wolfgang Denk
2011-08-27 12:01 ` Kumar Gala
2011-08-27 13:41 ` Wolfgang Denk
2011-08-27 16:09 ` Kumar Gala
2011-08-27 17:08 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314443032-2811-1-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox