From: "Pali Rohár" <pali.rohar@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 04/15] Only delay boot if keyboard open
Date: Thu, 1 Sep 2011 13:34:30 +0200 [thread overview]
Message-ID: <1314876881-9669-4-git-send-email-pali.rohar@gmail.com> (raw)
In-Reply-To: <1314876881-9669-1-git-send-email-pali.rohar@gmail.com>
From: Matan Ziv-Av <matan@svgalib.org>
---
board/nokia/rx51/rx51.c | 7 +++++++
include/configs/nokia_rx51.h | 1 +
2 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index 3149a79..347d08a 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -104,6 +104,13 @@ int misc_init_r(void)
setenv("nolo_atagaddr", buf);
#endif
+ // set environment variable slide_sw
+ // if keyboard slide is open/close
+ omap_set_gpio_direction(71, 1);
+ unsigned val = omap_get_gpio_datain(71);
+ omap_free_gpio(71);
+ setenv("slide_sw", val ? "close" : "open");
+
dieid_num_r();
return 0;
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 45b942a..5c3b068 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -200,6 +200,7 @@ int rx51_kp_getc(void);
"bootm ${nolo_kernaddr}\0"
#define CONFIG_PREBOOT \
+ "if test $slide_sw != open ; then run noloboot; fi ;" \
"echo Extra commands:;" \
"echo run sercon - Use serial port for control.;" \
"echo run usbcon - Use usbtty for control.;" \
--
1.7.4.1
next prev parent reply other threads:[~2011-09-01 11:34 UTC|newest]
Thread overview: 111+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-01 8:42 [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Pali Rohár
2011-09-01 8:46 ` Marek Vasut
2011-09-01 9:06 ` Pali Rohár
2011-09-01 9:39 ` Marek Vasut
2011-09-01 9:02 ` Stefano Babic
2011-09-01 9:09 ` Pali Rohár
2011-09-01 9:24 ` Stefano Babic
2011-09-01 10:49 ` Pali Rohár
2011-09-01 11:04 ` Marek Vasut
2011-09-01 11:34 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 02/15] Store existing atags at startup if chainloading Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 03/15] Nokia RX-51 aka N900 support Pali Rohár
2011-09-01 13:57 ` Mike Frysinger
2011-10-09 0:20 ` Pali Rohár
2011-10-09 15:59 ` Mike Frysinger
2011-10-12 15:10 ` Pali Rohár
2011-09-01 11:34 ` Pali Rohár [this message]
2011-09-01 13:58 ` [U-Boot] [PATCH 04/15] Only delay boot if keyboard open Mike Frysinger
2011-10-08 23:29 ` Pali Rohár
2011-10-09 16:00 ` Mike Frysinger
2011-09-01 11:34 ` [U-Boot] [PATCH 05/15] Change Wireless LAN mode from M4 to M0 Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 06/15] Look for boot.scr on 'mmc 0:3' instead 'mmc 0' and add support for loading boot.scr from 'mmc 2:1' Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 07/15] RX-51: Fixed compilation on top of master (changes from Beagle Board) Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 08/15] RX-51: Add support for resetting twl4030 watchdog Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 09/15] RX-51: Fix keymap Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 10/15] include/common.h: Add some macros for ANSI escape codes Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 11/15] drivers/video/cfb_console.c: Added support " Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 12/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-09-01 13:59 ` Mike Frysinger
2011-10-08 23:31 ` Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 13/15] New config variable CONFIG_MENU Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 14/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-09-01 11:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2011-09-01 13:52 ` [U-Boot] [PATCH 01/15] Make bootm optionally use pre-existing atags for Linux kernel boot Mike Frysinger
2011-10-08 23:37 ` Pali Rohár
2011-09-01 11:53 ` [U-Boot] Help: U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-10-09 0:24 ` Pali Rohár
2011-09-01 17:11 ` Pali Rohár
2011-12-17 16:59 ` [U-Boot] " Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 01/16] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 18:54 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 03/16] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 04/16] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 05/16] common/main.c: Fix function readline Pali Rohár
2011-12-18 18:58 ` Mike Frysinger
2011-12-18 20:12 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 06/16] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors Pali Rohár
2011-12-18 18:57 ` Mike Frysinger
2011-12-18 19:00 ` Pali Rohár
2011-12-18 20:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 19:00 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 19:01 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal Pali Rohár
2011-12-18 18:56 ` Mike Frysinger
2011-12-18 19:20 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 12/16] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 19:05 ` Mike Frysinger
2011-12-18 19:37 ` Pali Rohár
2011-12-18 20:08 ` Mike Frysinger
2011-12-18 20:14 ` Pali Rohár
2011-12-17 17:03 ` [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900 Pali Rohár
2011-12-18 19:06 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 19:07 ` Mike Frysinger
2011-12-18 19:12 ` Pali Rohár
2011-12-18 20:07 ` Mike Frysinger
2011-12-18 20:16 ` Pali Rohár
2012-01-06 6:59 ` Mike Frysinger
2011-12-17 17:03 ` [U-Boot] [PATCH 16/16] RX-51: Add support for bootmenu Pali Rohár
2011-12-17 19:25 ` [U-Boot] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-18 10:13 ` Pali Rohár
2011-12-18 12:42 ` Wolfgang Denk
2011-12-18 19:01 ` Mike Frysinger
2011-12-18 20:10 ` Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH v3] " Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 01/15] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 02/15] arch/arm/lib/bootm.c: Optionally use existing atags Pali Rohár
2011-12-18 21:33 ` [U-Boot] [PATCH 03/15] include/twl4030.h: Add power bus message definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 04/15] include/common.h: Add some ANSI escape codes definitions Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 05/15] common/main.c: Fix function readline Pali Rohár
2012-01-06 20:15 ` Mike Frysinger
2012-01-07 8:51 ` Pali Rohár
2012-02-27 4:33 ` Mike Frysinger
2012-02-27 18:40 ` Pali Rohár
2012-02-27 20:20 ` Mike Frysinger
2011-12-18 21:34 ` [U-Boot] [PATCH 06/15] drivers/video/cfb_console.c: Fix function console_scrollup Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 07/15] drivers/video/cfb_console.c: Add function console_clear and console_clear_line Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 08/15] drivers/video/cfb_console.c: Add functions for moving with cursor Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 09/15] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 10/15] New command clear: Clear the ANSI terminal Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 11/15] New config variable CONFIG_MENUCMD Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 12/15] New config variable CONFIG_PREMONITOR Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900 Pali Rohár
2012-01-03 16:05 ` Tom Rini
2012-01-10 13:14 ` Pali Rohár
2012-01-10 14:53 ` Tom Rini
2011-12-18 21:34 ` [U-Boot] [PATCH 14/15] New command bootmenu: ANSI terminal Boot Menu support Pali Rohár
2011-12-18 21:34 ` [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu Pali Rohár
2012-01-03 16:06 ` Tom Rini
2011-12-18 23:57 ` [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900) Wolfgang Denk
2011-12-19 7:17 ` Pali Rohár
2011-12-19 8:43 ` Graeme Russ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314876881-9669-4-git-send-email-pali.rohar@gmail.com \
--to=pali.rohar@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox