[U-Boot] [PATCH 07/31] iMX28: Add CPU-specific FEC ethernet init

[Marek Vasut <marek.vasut@gmail.com>]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Ben Warren <biggerbadderben@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
---
 arch/arm/cpu/arm926ejs/mx28/mx28.c |   31 +++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index e3df76b..dca54d2 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -129,3 +129,34 @@ int print_cpuinfo(void)
 	return 0;
 }
 #endif
+
+/*
+ * Initializes on-chip ethernet controllers.
+ */
+#ifdef	CONFIG_CMD_NET
+int cpu_eth_init(bd_t *bis)
+{
+	struct mx28_clkctrl_regs *clkctrl_regs =
+		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+	/* Turn on ENET clocks */
+	clrbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+		CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE);
+
+	/* Set up ENET PLL for 50 MHz */
+	/* Power on ENET PLL */
+	writel(CLKCTRL_PLL2CTRL0_POWER,
+		&clkctrl_regs->hw_clkctrl_pll2ctrl0_set);
+
+	udelay(10);
+
+	/* Gate on ENET PLL */
+	writel(CLKCTRL_PLL2CTRL0_CLKGATE,
+		&clkctrl_regs->hw_clkctrl_pll2ctrl0_clr);
+
+	/* Enable pad output */
+	setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN);
+
+	return 0;
+}
+#endif
-- 
1.7.5.4